| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017 Intel Corporation. |
| * Copyright 2019 Google LLC |
| * |
| * Modified from coreboot pmclib.c, pmc.c and pmutil.c |
| */ |
| |
| #define LOG_CATEGORY UCLASS_ACPI_PMC |
| |
| #include <common.h> |
| #include <dt-structs.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <spl.h> |
| #include <acpi/acpi_s3.h> |
| #include <asm/io.h> |
| #include <asm/pci.h> |
| #include <linux/bitops.h> |
| #include <power/acpi_pmc.h> |
| |
| #define GPIO_GPE_CFG 0x1050 |
| |
| /* Memory mapped IO registers behind PMC_BASE_ADDRESS */ |
| #define PRSTS 0x1000 |
| #define GEN_PMCON1 0x1020 |
| #define COLD_BOOT_STS BIT(27) |
| #define COLD_RESET_STS BIT(26) |
| #define WARM_RESET_STS BIT(25) |
| #define GLOBAL_RESET_STS BIT(24) |
| #define SRS BIT(20) |
| #define MS4V BIT(18) |
| #define RPS BIT(2) |
| #define GEN_PMCON1_CLR1_BITS (COLD_BOOT_STS | COLD_RESET_STS | \ |
| WARM_RESET_STS | GLOBAL_RESET_STS | \ |
| SRS | MS4V) |
| #define GEN_PMCON2 0x1024 |
| #define GEN_PMCON3 0x1028 |
| |
| /* Offset of TCO registers from ACPI base I/O address */ |
| #define TCO_REG_OFFSET 0x60 |
| #define TCO1_STS 0x64 |
| #define DMISCI_STS BIT(9) |
| #define BOOT_STS BIT(18) |
| #define TCO2_STS 0x66 |
| #define TCO1_CNT 0x68 |
| #define TCO_LOCK BIT(12) |
| #define TCO2_CNT 0x6a |
| |
| enum { |
| ETR = 0x1048, |
| CF9_LOCK = 1UL << 31, |
| CF9_GLB_RST = 1 << 20, |
| }; |
| |
| struct apl_pmc_platdata { |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct dtd_intel_apl_pmc dtplat; |
| #endif |
| pci_dev_t bdf; |
| }; |
| |
| static int apl_pmc_fill_power_state(struct udevice *dev) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| |
| upriv->tco1_sts = inw(upriv->acpi_base + TCO1_STS); |
| upriv->tco2_sts = inw(upriv->acpi_base + TCO2_STS); |
| |
| upriv->prsts = readl(upriv->pmc_bar0 + PRSTS); |
| upriv->gen_pmcon1 = readl(upriv->pmc_bar0 + GEN_PMCON1); |
| upriv->gen_pmcon2 = readl(upriv->pmc_bar0 + GEN_PMCON2); |
| upriv->gen_pmcon3 = readl(upriv->pmc_bar0 + GEN_PMCON3); |
| |
| return 0; |
| } |
| |
| static int apl_prev_sleep_state(struct udevice *dev, int prev_sleep_state) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| |
| /* WAK_STS bit will not be set when waking from G3 state */ |
| if (!(upriv->pm1_sts & WAK_STS) && |
| (upriv->gen_pmcon1 & COLD_BOOT_STS)) |
| prev_sleep_state = ACPI_S5; |
| |
| return prev_sleep_state; |
| } |
| |
| static int apl_disable_tco(struct udevice *dev) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| |
| pmc_disable_tco_base(upriv->acpi_base + TCO_REG_OFFSET); |
| |
| return 0; |
| } |
| |
| static int apl_global_reset_set_enable(struct udevice *dev, bool enable) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| |
| if (enable) |
| setbits_le32(upriv->pmc_bar0 + ETR, CF9_GLB_RST); |
| else |
| clrbits_le32(upriv->pmc_bar0 + ETR, CF9_GLB_RST); |
| |
| return 0; |
| } |
| |
| int apl_pmc_ofdata_to_uc_platdata(struct udevice *dev) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| struct apl_pmc_platdata *plat = dev_get_platdata(dev); |
| |
| #if !CONFIG_IS_ENABLED(OF_PLATDATA) |
| u32 base[6]; |
| int size; |
| int ret; |
| |
| ret = dev_read_u32_array(dev, "early-regs", base, ARRAY_SIZE(base)); |
| if (ret) |
| return log_msg_ret("Missing/short early-regs", ret); |
| if (spl_phase() == PHASE_TPL) { |
| upriv->pmc_bar0 = (void *)base[0]; |
| upriv->pmc_bar2 = (void *)base[2]; |
| |
| /* Since PCI is not enabled, we must get the BDF manually */ |
| plat->bdf = pci_get_devfn(dev); |
| if (plat->bdf < 0) |
| return log_msg_ret("Cannot get PMC PCI address", |
| plat->bdf); |
| } |
| upriv->acpi_base = base[4]; |
| |
| /* Since PCI is not enabled, we must get the BDF manually */ |
| plat->bdf = pci_get_devfn(dev); |
| if (plat->bdf < 0) |
| return log_msg_ret("Cannot get PMC PCI address", plat->bdf); |
| |
| /* Get the dwX values for pmc gpe settings */ |
| size = dev_read_size(dev, "gpe0-dw"); |
| if (size < 0) |
| return log_msg_ret("Cannot read gpe0-dm", size); |
| upriv->gpe0_count = size / sizeof(u32); |
| ret = dev_read_u32_array(dev, "gpe0-dw", upriv->gpe0_dw, |
| upriv->gpe0_count); |
| if (ret) |
| return log_msg_ret("Bad gpe0-dw", ret); |
| |
| return pmc_ofdata_to_uc_platdata(dev); |
| #else |
| struct dtd_intel_apl_pmc *dtplat = &plat->dtplat; |
| |
| plat->bdf = pci_ofplat_get_devfn(dtplat->reg[0]); |
| upriv->pmc_bar0 = (void *)dtplat->early_regs[0]; |
| upriv->pmc_bar2 = (void *)dtplat->early_regs[2]; |
| upriv->acpi_base = dtplat->early_regs[4]; |
| upriv->gpe0_dwx_mask = dtplat->gpe0_dwx_mask; |
| upriv->gpe0_dwx_shift_base = dtplat->gpe0_dwx_shift_base; |
| upriv->gpe0_sts_reg = dtplat->gpe0_sts; |
| upriv->gpe0_sts_reg += upriv->acpi_base; |
| upriv->gpe0_en_reg = dtplat->gpe0_en; |
| upriv->gpe0_en_reg += upriv->acpi_base; |
| upriv->gpe0_count = min((int)ARRAY_SIZE(dtplat->gpe0_dw), GPE0_REG_MAX); |
| memcpy(upriv->gpe0_dw, dtplat->gpe0_dw, sizeof(dtplat->gpe0_dw)); |
| #endif |
| upriv->gpe_cfg = (u32 *)(upriv->pmc_bar0 + GPIO_GPE_CFG); |
| |
| return 0; |
| } |
| |
| static int enable_pmcbar(struct udevice *dev) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| struct apl_pmc_platdata *priv = dev_get_platdata(dev); |
| pci_dev_t pmc = priv->bdf; |
| |
| /* |
| * Set PMC base addresses and enable decoding. BARs 1 and 3 are 64-bit |
| * BARs. |
| */ |
| pci_x86_write_config(pmc, PCI_BASE_ADDRESS_0, (ulong)upriv->pmc_bar0, |
| PCI_SIZE_32); |
| pci_x86_write_config(pmc, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32); |
| pci_x86_write_config(pmc, PCI_BASE_ADDRESS_2, (ulong)upriv->pmc_bar2, |
| PCI_SIZE_32); |
| pci_x86_write_config(pmc, PCI_BASE_ADDRESS_3, 0, PCI_SIZE_32); |
| pci_x86_write_config(pmc, PCI_BASE_ADDRESS_4, upriv->acpi_base, |
| PCI_SIZE_16); |
| pci_x86_write_config(pmc, PCI_COMMAND, PCI_COMMAND_IO | |
| PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, |
| PCI_SIZE_16); |
| |
| return 0; |
| } |
| |
| static int apl_pmc_probe(struct udevice *dev) |
| { |
| if (spl_phase() == PHASE_TPL) { |
| return enable_pmcbar(dev); |
| } else { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| |
| upriv->pmc_bar0 = (void *)dm_pci_read_bar32(dev, 0); |
| upriv->pmc_bar2 = (void *)dm_pci_read_bar32(dev, 2); |
| } |
| |
| return 0; |
| } |
| |
| static struct acpi_pmc_ops apl_pmc_ops = { |
| .init = apl_pmc_fill_power_state, |
| .prev_sleep_state = apl_prev_sleep_state, |
| .disable_tco = apl_disable_tco, |
| .global_reset_set_enable = apl_global_reset_set_enable, |
| }; |
| |
| static const struct udevice_id apl_pmc_ids[] = { |
| { .compatible = "intel,apl-pmc" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(apl_pmc) = { |
| .name = "intel_apl_pmc", |
| .id = UCLASS_ACPI_PMC, |
| .of_match = apl_pmc_ids, |
| .ofdata_to_platdata = apl_pmc_ofdata_to_uc_platdata, |
| .probe = apl_pmc_probe, |
| .ops = &apl_pmc_ops, |
| .platdata_auto_alloc_size = sizeof(struct apl_pmc_platdata), |
| }; |