| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Based on acpi.c from coreboot |
| * |
| * Copyright (C) 2015, Saket Sinha <saket.sinha89@gmail.com> |
| * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <cpu.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <dm/uclass-internal.h> |
| #include <mapmem.h> |
| #include <serial.h> |
| #include <version.h> |
| #include <acpi/acpi_table.h> |
| #include <asm/acpi/global_nvs.h> |
| #include <asm/ioapic.h> |
| #include <asm/lapic.h> |
| #include <asm/mpspec.h> |
| #include <asm/tables.h> |
| #include <asm/arch/global_nvs.h> |
| #include <dm/acpi.h> |
| |
| /* |
| * IASL compiles the dsdt entries and writes the hex values |
| * to a C array AmlCode[] (see dsdt.c). |
| */ |
| extern const unsigned char AmlCode[]; |
| |
| /* ACPI RSDP address to be used in boot parameters */ |
| static ulong acpi_rsdp_addr; |
| |
| static void acpi_create_facs(struct acpi_facs *facs) |
| { |
| memset((void *)facs, 0, sizeof(struct acpi_facs)); |
| |
| memcpy(facs->signature, "FACS", 4); |
| facs->length = sizeof(struct acpi_facs); |
| facs->hardware_signature = 0; |
| facs->firmware_waking_vector = 0; |
| facs->global_lock = 0; |
| facs->flags = 0; |
| facs->x_firmware_waking_vector_l = 0; |
| facs->x_firmware_waking_vector_h = 0; |
| facs->version = 1; |
| } |
| |
| static int acpi_create_madt_lapic(struct acpi_madt_lapic *lapic, |
| u8 cpu, u8 apic) |
| { |
| lapic->type = ACPI_APIC_LAPIC; |
| lapic->length = sizeof(struct acpi_madt_lapic); |
| lapic->flags = LOCAL_APIC_FLAG_ENABLED; |
| lapic->processor_id = cpu; |
| lapic->apic_id = apic; |
| |
| return lapic->length; |
| } |
| |
| int acpi_create_madt_lapics(u32 current) |
| { |
| struct udevice *dev; |
| int total_length = 0; |
| |
| for (uclass_find_first_device(UCLASS_CPU, &dev); |
| dev; |
| uclass_find_next_device(&dev)) { |
| struct cpu_platdata *plat = dev_get_parent_platdata(dev); |
| int length = acpi_create_madt_lapic( |
| (struct acpi_madt_lapic *)current, |
| plat->cpu_id, plat->cpu_id); |
| current += length; |
| total_length += length; |
| } |
| |
| return total_length; |
| } |
| |
| int acpi_create_madt_ioapic(struct acpi_madt_ioapic *ioapic, u8 id, |
| u32 addr, u32 gsi_base) |
| { |
| ioapic->type = ACPI_APIC_IOAPIC; |
| ioapic->length = sizeof(struct acpi_madt_ioapic); |
| ioapic->reserved = 0x00; |
| ioapic->gsi_base = gsi_base; |
| ioapic->ioapic_id = id; |
| ioapic->ioapic_addr = addr; |
| |
| return ioapic->length; |
| } |
| |
| int acpi_create_madt_irqoverride(struct acpi_madt_irqoverride *irqoverride, |
| u8 bus, u8 source, u32 gsirq, u16 flags) |
| { |
| irqoverride->type = ACPI_APIC_IRQ_SRC_OVERRIDE; |
| irqoverride->length = sizeof(struct acpi_madt_irqoverride); |
| irqoverride->bus = bus; |
| irqoverride->source = source; |
| irqoverride->gsirq = gsirq; |
| irqoverride->flags = flags; |
| |
| return irqoverride->length; |
| } |
| |
| int acpi_create_madt_lapic_nmi(struct acpi_madt_lapic_nmi *lapic_nmi, |
| u8 cpu, u16 flags, u8 lint) |
| { |
| lapic_nmi->type = ACPI_APIC_LAPIC_NMI; |
| lapic_nmi->length = sizeof(struct acpi_madt_lapic_nmi); |
| lapic_nmi->flags = flags; |
| lapic_nmi->processor_id = cpu; |
| lapic_nmi->lint = lint; |
| |
| return lapic_nmi->length; |
| } |
| |
| static int acpi_create_madt_irq_overrides(u32 current) |
| { |
| struct acpi_madt_irqoverride *irqovr; |
| u16 sci_flags = MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH; |
| int length = 0; |
| |
| irqovr = (void *)current; |
| length += acpi_create_madt_irqoverride(irqovr, 0, 0, 2, 0); |
| |
| irqovr = (void *)(current + length); |
| length += acpi_create_madt_irqoverride(irqovr, 0, 9, 9, sci_flags); |
| |
| return length; |
| } |
| |
| __weak u32 acpi_fill_madt(u32 current) |
| { |
| current += acpi_create_madt_lapics(current); |
| |
| current += acpi_create_madt_ioapic((struct acpi_madt_ioapic *)current, |
| io_apic_read(IO_APIC_ID) >> 24, IO_APIC_ADDR, 0); |
| |
| current += acpi_create_madt_irq_overrides(current); |
| |
| return current; |
| } |
| |
| static void acpi_create_madt(struct acpi_madt *madt) |
| { |
| struct acpi_table_header *header = &(madt->header); |
| u32 current = (u32)madt + sizeof(struct acpi_madt); |
| |
| memset((void *)madt, 0, sizeof(struct acpi_madt)); |
| |
| /* Fill out header fields */ |
| acpi_fill_header(header, "APIC"); |
| header->length = sizeof(struct acpi_madt); |
| header->revision = 4; |
| |
| madt->lapic_addr = LAPIC_DEFAULT_BASE; |
| madt->flags = ACPI_MADT_PCAT_COMPAT; |
| |
| current = acpi_fill_madt(current); |
| |
| /* (Re)calculate length and checksum */ |
| header->length = current - (u32)madt; |
| |
| header->checksum = table_compute_checksum((void *)madt, header->length); |
| } |
| |
| int acpi_create_mcfg_mmconfig(struct acpi_mcfg_mmconfig *mmconfig, u32 base, |
| u16 seg_nr, u8 start, u8 end) |
| { |
| memset(mmconfig, 0, sizeof(*mmconfig)); |
| mmconfig->base_address_l = base; |
| mmconfig->base_address_h = 0; |
| mmconfig->pci_segment_group_number = seg_nr; |
| mmconfig->start_bus_number = start; |
| mmconfig->end_bus_number = end; |
| |
| return sizeof(struct acpi_mcfg_mmconfig); |
| } |
| |
| __weak u32 acpi_fill_mcfg(u32 current) |
| { |
| current += acpi_create_mcfg_mmconfig |
| ((struct acpi_mcfg_mmconfig *)current, |
| CONFIG_PCIE_ECAM_BASE, 0x0, 0x0, 255); |
| |
| return current; |
| } |
| |
| /* MCFG is defined in the PCI Firmware Specification 3.0 */ |
| static void acpi_create_mcfg(struct acpi_mcfg *mcfg) |
| { |
| struct acpi_table_header *header = &(mcfg->header); |
| u32 current = (u32)mcfg + sizeof(struct acpi_mcfg); |
| |
| memset((void *)mcfg, 0, sizeof(struct acpi_mcfg)); |
| |
| /* Fill out header fields */ |
| acpi_fill_header(header, "MCFG"); |
| header->length = sizeof(struct acpi_mcfg); |
| header->revision = 1; |
| |
| current = acpi_fill_mcfg(current); |
| |
| /* (Re)calculate length and checksum */ |
| header->length = current - (u32)mcfg; |
| header->checksum = table_compute_checksum((void *)mcfg, header->length); |
| } |
| |
| __weak u32 acpi_fill_csrt(u32 current) |
| { |
| return current; |
| } |
| |
| static void acpi_create_csrt(struct acpi_csrt *csrt) |
| { |
| struct acpi_table_header *header = &(csrt->header); |
| u32 current = (u32)csrt + sizeof(struct acpi_csrt); |
| |
| memset((void *)csrt, 0, sizeof(struct acpi_csrt)); |
| |
| /* Fill out header fields */ |
| acpi_fill_header(header, "CSRT"); |
| header->length = sizeof(struct acpi_csrt); |
| header->revision = 0; |
| |
| current = acpi_fill_csrt(current); |
| |
| /* (Re)calculate length and checksum */ |
| header->length = current - (u32)csrt; |
| header->checksum = table_compute_checksum((void *)csrt, header->length); |
| } |
| |
| static void acpi_create_spcr(struct acpi_spcr *spcr) |
| { |
| struct acpi_table_header *header = &(spcr->header); |
| struct serial_device_info serial_info = {0}; |
| ulong serial_address, serial_offset; |
| struct udevice *dev; |
| uint serial_config; |
| uint serial_width; |
| int access_size; |
| int space_id; |
| int ret = -ENODEV; |
| |
| /* Fill out header fields */ |
| acpi_fill_header(header, "SPCR"); |
| header->length = sizeof(struct acpi_spcr); |
| header->revision = 2; |
| |
| /* Read the device once, here. It is reused below */ |
| dev = gd->cur_serial_dev; |
| if (dev) |
| ret = serial_getinfo(dev, &serial_info); |
| if (ret) |
| serial_info.type = SERIAL_CHIP_UNKNOWN; |
| |
| /* Encode chip type */ |
| switch (serial_info.type) { |
| case SERIAL_CHIP_16550_COMPATIBLE: |
| spcr->interface_type = ACPI_DBG2_16550_COMPATIBLE; |
| break; |
| case SERIAL_CHIP_UNKNOWN: |
| default: |
| spcr->interface_type = ACPI_DBG2_UNKNOWN; |
| break; |
| } |
| |
| /* Encode address space */ |
| switch (serial_info.addr_space) { |
| case SERIAL_ADDRESS_SPACE_MEMORY: |
| space_id = ACPI_ADDRESS_SPACE_MEMORY; |
| break; |
| case SERIAL_ADDRESS_SPACE_IO: |
| default: |
| space_id = ACPI_ADDRESS_SPACE_IO; |
| break; |
| } |
| |
| serial_width = serial_info.reg_width * 8; |
| serial_offset = serial_info.reg_offset << serial_info.reg_shift; |
| serial_address = serial_info.addr + serial_offset; |
| |
| /* Encode register access size */ |
| switch (serial_info.reg_shift) { |
| case 0: |
| access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; |
| break; |
| case 1: |
| access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; |
| break; |
| case 2: |
| access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; |
| break; |
| case 3: |
| access_size = ACPI_ACCESS_SIZE_QWORD_ACCESS; |
| break; |
| default: |
| access_size = ACPI_ACCESS_SIZE_UNDEFINED; |
| break; |
| } |
| |
| debug("UART type %u @ %lx\n", spcr->interface_type, serial_address); |
| |
| /* Fill GAS */ |
| spcr->serial_port.space_id = space_id; |
| spcr->serial_port.bit_width = serial_width; |
| spcr->serial_port.bit_offset = 0; |
| spcr->serial_port.access_size = access_size; |
| spcr->serial_port.addrl = lower_32_bits(serial_address); |
| spcr->serial_port.addrh = upper_32_bits(serial_address); |
| |
| /* Encode baud rate */ |
| switch (serial_info.baudrate) { |
| case 9600: |
| spcr->baud_rate = 3; |
| break; |
| case 19200: |
| spcr->baud_rate = 4; |
| break; |
| case 57600: |
| spcr->baud_rate = 6; |
| break; |
| case 115200: |
| spcr->baud_rate = 7; |
| break; |
| default: |
| spcr->baud_rate = 0; |
| break; |
| } |
| |
| serial_config = SERIAL_DEFAULT_CONFIG; |
| if (dev) |
| ret = serial_getconfig(dev, &serial_config); |
| |
| spcr->parity = SERIAL_GET_PARITY(serial_config); |
| spcr->stop_bits = SERIAL_GET_STOP(serial_config); |
| |
| /* No PCI devices for now */ |
| spcr->pci_device_id = 0xffff; |
| spcr->pci_vendor_id = 0xffff; |
| |
| /* |
| * SPCR has no clue if the UART base clock speed is different |
| * to the default one. However, the SPCR 1.04 defines baud rate |
| * 0 as a preconfigured state of UART and OS is supposed not |
| * to touch the configuration of the serial device. |
| */ |
| if (serial_info.clock != SERIAL_DEFAULT_CLOCK) |
| spcr->baud_rate = 0; |
| |
| /* Fix checksum */ |
| header->checksum = table_compute_checksum((void *)spcr, header->length); |
| } |
| |
| /* |
| * QEMU's version of write_acpi_tables is defined in drivers/misc/qfw.c |
| */ |
| ulong write_acpi_tables(ulong start_addr) |
| { |
| struct acpi_ctx sctx, *ctx = &sctx; |
| struct acpi_facs *facs; |
| struct acpi_table_header *dsdt; |
| struct acpi_fadt *fadt; |
| struct acpi_mcfg *mcfg; |
| struct acpi_madt *madt; |
| struct acpi_csrt *csrt; |
| struct acpi_spcr *spcr; |
| void *start; |
| ulong addr; |
| int i; |
| |
| start = map_sysmem(start_addr, 0); |
| |
| debug("ACPI: Writing ACPI tables at %lx\n", start_addr); |
| |
| acpi_setup_base_tables(ctx, start); |
| |
| debug("ACPI: * FACS\n"); |
| facs = ctx->current; |
| acpi_inc_align(ctx, sizeof(struct acpi_facs)); |
| |
| acpi_create_facs(facs); |
| |
| debug("ACPI: * DSDT\n"); |
| dsdt = ctx->current; |
| memcpy(dsdt, &AmlCode, sizeof(struct acpi_table_header)); |
| acpi_inc(ctx, sizeof(struct acpi_table_header)); |
| memcpy(ctx->current, |
| (char *)&AmlCode + sizeof(struct acpi_table_header), |
| dsdt->length - sizeof(struct acpi_table_header)); |
| acpi_inc_align(ctx, dsdt->length - sizeof(struct acpi_table_header)); |
| |
| /* Pack GNVS into the ACPI table area */ |
| for (i = 0; i < dsdt->length; i++) { |
| u32 *gnvs = (u32 *)((u32)dsdt + i); |
| if (*gnvs == ACPI_GNVS_ADDR) { |
| ulong addr = (ulong)map_to_sysmem(ctx->current); |
| |
| debug("Fix up global NVS in DSDT to %#08lx\n", addr); |
| *gnvs = addr; |
| break; |
| } |
| } |
| |
| /* Update DSDT checksum since we patched the GNVS address */ |
| dsdt->checksum = 0; |
| dsdt->checksum = table_compute_checksum((void *)dsdt, dsdt->length); |
| |
| /* Fill in platform-specific global NVS variables */ |
| acpi_create_gnvs(ctx->current); |
| acpi_inc_align(ctx, sizeof(struct acpi_global_nvs)); |
| |
| debug("ACPI: * FADT\n"); |
| fadt = ctx->current; |
| acpi_inc_align(ctx, sizeof(struct acpi_fadt)); |
| acpi_create_fadt(fadt, facs, dsdt); |
| acpi_add_table(ctx, fadt); |
| |
| debug("ACPI: * MADT\n"); |
| madt = ctx->current; |
| acpi_create_madt(madt); |
| acpi_inc_align(ctx, madt->header.length); |
| acpi_add_table(ctx, madt); |
| |
| debug("ACPI: * MCFG\n"); |
| mcfg = ctx->current; |
| acpi_create_mcfg(mcfg); |
| acpi_inc_align(ctx, mcfg->header.length); |
| acpi_add_table(ctx, mcfg); |
| |
| debug("ACPI: * CSRT\n"); |
| csrt = ctx->current; |
| acpi_create_csrt(csrt); |
| acpi_inc_align(ctx, csrt->header.length); |
| acpi_add_table(ctx, csrt); |
| |
| debug("ACPI: * SPCR\n"); |
| spcr = ctx->current; |
| acpi_create_spcr(spcr); |
| acpi_inc_align(ctx, spcr->header.length); |
| acpi_add_table(ctx, spcr); |
| |
| acpi_write_dev_tables(ctx); |
| |
| addr = map_to_sysmem(ctx->current); |
| debug("current = %lx\n", addr); |
| |
| acpi_rsdp_addr = (unsigned long)ctx->rsdp; |
| debug("ACPI: done\n"); |
| |
| return addr; |
| } |
| |
| ulong acpi_get_rsdp_addr(void) |
| { |
| return acpi_rsdp_addr; |
| } |