| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000-2010 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Andreas Heppel <aheppel@sysgo.de> |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <env.h> |
| #include <environment.h> |
| #include <linux/stddef.h> |
| #include <search.h> |
| #include <errno.h> |
| #include <malloc.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /************************************************************************ |
| * Default settings to be used when no valid environment is found |
| */ |
| #include <env_default.h> |
| |
| struct hsearch_data env_htab = { |
| #if CONFIG_IS_ENABLED(ENV_SUPPORT) |
| /* defined in flags.c, only compile with ENV_SUPPORT */ |
| .change_ok = env_flags_validate, |
| #endif |
| }; |
| |
| /* |
| * Read an environment variable as a boolean |
| * Return -1 if variable does not exist (default to true) |
| */ |
| int env_get_yesno(const char *var) |
| { |
| char *s = env_get(var); |
| |
| if (s == NULL) |
| return -1; |
| return (*s == '1' || *s == 'y' || *s == 'Y' || *s == 't' || *s == 'T') ? |
| 1 : 0; |
| } |
| |
| /* |
| * Look up the variable from the default environment |
| */ |
| char *env_get_default(const char *name) |
| { |
| char *ret_val; |
| unsigned long really_valid = gd->env_valid; |
| unsigned long real_gd_flags = gd->flags; |
| |
| /* Pretend that the image is bad. */ |
| gd->flags &= ~GD_FLG_ENV_READY; |
| gd->env_valid = ENV_INVALID; |
| ret_val = env_get(name); |
| gd->env_valid = really_valid; |
| gd->flags = real_gd_flags; |
| return ret_val; |
| } |
| |
| void set_default_env(const char *s, int flags) |
| { |
| if (sizeof(default_environment) > ENV_SIZE) { |
| puts("*** Error - default environment is too large\n\n"); |
| return; |
| } |
| |
| if (s) { |
| if ((flags & H_INTERACTIVE) == 0) { |
| printf("*** Warning - %s, " |
| "using default environment\n\n", s); |
| } else { |
| puts(s); |
| } |
| } else { |
| debug("Using default environment\n"); |
| } |
| |
| if (himport_r(&env_htab, (char *)default_environment, |
| sizeof(default_environment), '\0', flags, 0, |
| 0, NULL) == 0) |
| pr_err("## Error: Environment import failed: errno = %d\n", |
| errno); |
| |
| gd->flags |= GD_FLG_ENV_READY; |
| gd->flags |= GD_FLG_ENV_DEFAULT; |
| } |
| |
| |
| /* [re]set individual variables to their value in the default environment */ |
| int set_default_vars(int nvars, char * const vars[], int flags) |
| { |
| /* |
| * Special use-case: import from default environment |
| * (and use \0 as a separator) |
| */ |
| flags |= H_NOCLEAR; |
| return himport_r(&env_htab, (const char *)default_environment, |
| sizeof(default_environment), '\0', |
| flags, 0, nvars, vars); |
| } |
| |
| /* |
| * Check if CRC is valid and (if yes) import the environment. |
| * Note that "buf" may or may not be aligned. |
| */ |
| int env_import(const char *buf, int check) |
| { |
| env_t *ep = (env_t *)buf; |
| |
| if (check) { |
| uint32_t crc; |
| |
| memcpy(&crc, &ep->crc, sizeof(crc)); |
| |
| if (crc32(0, ep->data, ENV_SIZE) != crc) { |
| set_default_env("bad CRC", 0); |
| return -ENOMSG; /* needed for env_load() */ |
| } |
| } |
| |
| if (himport_r(&env_htab, (char *)ep->data, ENV_SIZE, '\0', 0, 0, |
| 0, NULL)) { |
| gd->flags |= GD_FLG_ENV_READY; |
| return 0; |
| } |
| |
| pr_err("Cannot import environment: errno = %d\n", errno); |
| |
| set_default_env("import failed", 0); |
| |
| return -EIO; |
| } |
| |
| #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| static unsigned char env_flags; |
| |
| int env_import_redund(const char *buf1, int buf1_read_fail, |
| const char *buf2, int buf2_read_fail) |
| { |
| int crc1_ok, crc2_ok; |
| env_t *ep, *tmp_env1, *tmp_env2; |
| |
| tmp_env1 = (env_t *)buf1; |
| tmp_env2 = (env_t *)buf2; |
| |
| if (buf1_read_fail && buf2_read_fail) { |
| puts("*** Error - No Valid Environment Area found\n"); |
| } else if (buf1_read_fail || buf2_read_fail) { |
| puts("*** Warning - some problems detected "); |
| puts("reading environment; recovered successfully\n"); |
| } |
| |
| if (buf1_read_fail && buf2_read_fail) { |
| set_default_env("bad env area", 0); |
| return -EIO; |
| } else if (!buf1_read_fail && buf2_read_fail) { |
| gd->env_valid = ENV_VALID; |
| return env_import((char *)tmp_env1, 1); |
| } else if (buf1_read_fail && !buf2_read_fail) { |
| gd->env_valid = ENV_REDUND; |
| return env_import((char *)tmp_env2, 1); |
| } |
| |
| crc1_ok = crc32(0, tmp_env1->data, ENV_SIZE) == |
| tmp_env1->crc; |
| crc2_ok = crc32(0, tmp_env2->data, ENV_SIZE) == |
| tmp_env2->crc; |
| |
| if (!crc1_ok && !crc2_ok) { |
| set_default_env("bad CRC", 0); |
| return -ENOMSG; /* needed for env_load() */ |
| } else if (crc1_ok && !crc2_ok) { |
| gd->env_valid = ENV_VALID; |
| } else if (!crc1_ok && crc2_ok) { |
| gd->env_valid = ENV_REDUND; |
| } else { |
| /* both ok - check serial */ |
| if (tmp_env1->flags == 255 && tmp_env2->flags == 0) |
| gd->env_valid = ENV_REDUND; |
| else if (tmp_env2->flags == 255 && tmp_env1->flags == 0) |
| gd->env_valid = ENV_VALID; |
| else if (tmp_env1->flags > tmp_env2->flags) |
| gd->env_valid = ENV_VALID; |
| else if (tmp_env2->flags > tmp_env1->flags) |
| gd->env_valid = ENV_REDUND; |
| else /* flags are equal - almost impossible */ |
| gd->env_valid = ENV_VALID; |
| } |
| |
| if (gd->env_valid == ENV_VALID) |
| ep = tmp_env1; |
| else |
| ep = tmp_env2; |
| |
| env_flags = ep->flags; |
| return env_import((char *)ep, 0); |
| } |
| #endif /* CONFIG_SYS_REDUNDAND_ENVIRONMENT */ |
| |
| /* Export the environment and generate CRC for it. */ |
| int env_export(env_t *env_out) |
| { |
| char *res; |
| ssize_t len; |
| |
| res = (char *)env_out->data; |
| len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); |
| if (len < 0) { |
| pr_err("Cannot export environment: errno = %d\n", errno); |
| return 1; |
| } |
| |
| env_out->crc = crc32(0, env_out->data, ENV_SIZE); |
| |
| #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| env_out->flags = ++env_flags; /* increase the serial */ |
| #endif |
| |
| return 0; |
| } |
| |
| void env_relocate(void) |
| { |
| #if defined(CONFIG_NEEDS_MANUAL_RELOC) |
| env_reloc(); |
| env_fix_drivers(); |
| |
| if (env_htab.change_ok) |
| env_htab.change_ok += gd->reloc_off; |
| #endif |
| if (gd->env_valid == ENV_INVALID) { |
| #if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_SPL_BUILD) |
| /* Environment not changable */ |
| set_default_env(NULL, 0); |
| #else |
| bootstage_error(BOOTSTAGE_ID_NET_CHECKSUM); |
| set_default_env("bad CRC", 0); |
| #endif |
| } else { |
| env_load(); |
| } |
| } |
| |
| #ifdef CONFIG_AUTO_COMPLETE |
| int env_complete(char *var, int maxv, char *cmdv[], int bufsz, char *buf, |
| bool dollar_comp) |
| { |
| ENTRY *match; |
| int found, idx; |
| |
| if (dollar_comp) { |
| /* |
| * When doing $ completion, the first character should |
| * obviously be a '$'. |
| */ |
| if (var[0] != '$') |
| return 0; |
| |
| var++; |
| |
| /* |
| * The second one, if present, should be a '{', as some |
| * configuration of the u-boot shell expand ${var} but not |
| * $var. |
| */ |
| if (var[0] == '{') |
| var++; |
| else if (var[0] != '\0') |
| return 0; |
| } |
| |
| idx = 0; |
| found = 0; |
| cmdv[0] = NULL; |
| |
| |
| while ((idx = hmatch_r(var, idx, &match, &env_htab))) { |
| int vallen = strlen(match->key) + 1; |
| |
| if (found >= maxv - 2 || |
| bufsz < vallen + (dollar_comp ? 3 : 0)) |
| break; |
| |
| cmdv[found++] = buf; |
| |
| /* Add the '${' prefix to each var when doing $ completion. */ |
| if (dollar_comp) { |
| strcpy(buf, "${"); |
| buf += 2; |
| bufsz -= 3; |
| } |
| |
| memcpy(buf, match->key, vallen); |
| buf += vallen; |
| bufsz -= vallen; |
| |
| if (dollar_comp) { |
| /* |
| * This one is a bit odd: vallen already contains the |
| * '\0' character but we need to add the '}' suffix, |
| * hence the buf - 1 here. strcpy() will add the '\0' |
| * character just after '}'. buf is then incremented |
| * to account for the extra '}' we just added. |
| */ |
| strcpy(buf - 1, "}"); |
| buf++; |
| } |
| } |
| |
| qsort(cmdv, found, sizeof(cmdv[0]), strcmp_compar); |
| |
| if (idx) |
| cmdv[found++] = dollar_comp ? "${...}" : "..."; |
| |
| cmdv[found] = NULL; |
| return found; |
| } |
| #endif |