drivers/gpio/pm8916_gpio.c - platform/external/u-boot - Gitiles

 /*
  * Qualcomm pm8916 pmic gpio driver - part of Qualcomm PM8916 PMIC
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <dm.h>
 #include <power/pmic.h>
 #include <spmi/spmi.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <linux/bitops.h>

 /* Register offset for each gpio */
 #define REG_OFFSET(x)          ((x) * 0x100)

 /* Register maps */

 /* Type and subtype are shared for all pm8916 peripherals */
 #define REG_TYPE               0x4
 #define REG_SUBTYPE            0x5

 #define REG_STATUS             0x08
 #define REG_STATUS_VAL_MASK    0x1

 /* MODE_CTL */
 #define REG_CTL		0x40
 #define REG_CTL_MODE_MASK       0x70
 #define REG_CTL_MODE_INPUT      0x00
 #define REG_CTL_MODE_INOUT      0x20
 #define REG_CTL_MODE_OUTPUT     0x10
 #define REG_CTL_OUTPUT_MASK     0x0F

 #define REG_DIG_VIN_CTL        0x41
 #define REG_DIG_VIN_VIN0       0

 #define REG_DIG_PULL_CTL       0x42
 #define REG_DIG_PULL_NO_PU     0x5

 #define REG_DIG_OUT_CTL        0x45
 #define REG_DIG_OUT_CTL_CMOS   (0x0 << 4)
 #define REG_DIG_OUT_CTL_DRIVE_L 0x1

 #define REG_EN_CTL             0x46
 #define REG_EN_CTL_ENABLE      (1 << 7)

 struct pm8916_gpio_bank {
 	uint32_t pid; /* Peripheral ID on SPMI bus */
 };

 static int pm8916_gpio_set_direction(struct udevice *dev, unsigned offset,
 				     bool input, int value)
 {
 	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 	int ret;

 	/* Disable the GPIO */
 	ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
 			      REG_EN_CTL_ENABLE, 0);
 	if (ret < 0)
 		return ret;

 	/* Select the mode */
 	if (input)
 		ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
 				     REG_CTL_MODE_INPUT);
 	else
 		ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
 				     REG_CTL_MODE_INOUT | (value ? 1 : 0));
 	if (ret < 0)
 		return ret;

 	/* Set the right pull (no pull) */
 	ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL,
 			     REG_DIG_PULL_NO_PU);
 	if (ret < 0)
 		return ret;

 	/* Configure output pin drivers if needed */
 	if (!input) {
 		/* Select the VIN - VIN0, pin is input so it doesn't matter */
 		ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_VIN_CTL,
 				     REG_DIG_VIN_VIN0);
 		if (ret < 0)
 			return ret;

 		/* Set the right dig out control */
 		ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_OUT_CTL,
 				     REG_DIG_OUT_CTL_CMOS |
 				     REG_DIG_OUT_CTL_DRIVE_L);
 		if (ret < 0)
 			return ret;
 	}

 	/* Enable the GPIO */
 	return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
 			       REG_EN_CTL_ENABLE);
 }

 static int pm8916_gpio_direction_input(struct udevice *dev, unsigned offset)
 {
 	return pm8916_gpio_set_direction(dev, offset, true, 0);
 }

 static int pm8916_gpio_direction_output(struct udevice *dev, unsigned offset,
 					int value)
 {
 	return pm8916_gpio_set_direction(dev, offset, false, value);
 }

 static int pm8916_gpio_get_function(struct udevice *dev, unsigned offset)
 {
 	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 	int reg;

 	/* Set the output value of the gpio */
 	reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL);
 	if (reg < 0)
 		return reg;

 	switch (reg & REG_CTL_MODE_MASK) {
 	case REG_CTL_MODE_INPUT:
 		return GPIOF_INPUT;
 	case REG_CTL_MODE_INOUT: /* Fallthrough */
 	case REG_CTL_MODE_OUTPUT:
 		return GPIOF_OUTPUT;
 	default:
 		return GPIOF_UNKNOWN;
 	}
 }

 static int pm8916_gpio_get_value(struct udevice *dev, unsigned offset)
 {
 	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
 	int reg;

 	reg = pmic_reg_read(dev->parent, gpio_base + REG_STATUS);
 	if (reg < 0)
 		return reg;

 	return !!(reg & REG_STATUS_VAL_MASK);
 }

 static int pm8916_gpio_set_value(struct udevice *dev, unsigned offset,
 				 int value)
 {
 	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
 	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);

 	/* Set the output value of the gpio */
 	return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
 			       REG_CTL_OUTPUT_MASK, !!value);
 }

 static const struct dm_gpio_ops pm8916_gpio_ops = {
 	.direction_input	= pm8916_gpio_direction_input,
 	.direction_output	= pm8916_gpio_direction_output,
 	.get_value		= pm8916_gpio_get_value,
 	.set_value		= pm8916_gpio_set_value,
 	.get_function		= pm8916_gpio_get_function,
 };

 static int pm8916_gpio_probe(struct udevice *dev)
 {
 	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
 	int reg;

 	priv->pid = dev_read_addr(dev);
 	if (priv->pid == FDT_ADDR_T_NONE)
 		return -EINVAL;

 	/* Do a sanity check */
 	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
 	if (reg != 0x10)
 		return -ENODEV;

 	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
 	if (reg != 0x5 && reg != 0x1)
 		return -ENODEV;

 	return 0;
 }

 static int pm8916_gpio_ofdata_to_platdata(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

 	uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 0);
 	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
 	if (uc_priv->bank_name == NULL)
 		uc_priv->bank_name = "pm8916";

 	return 0;
 }

 static const struct udevice_id pm8916_gpio_ids[] = {
 	{ .compatible = "qcom,pm8916-gpio" },
 	{ .compatible = "qcom,pm8994-gpio" },	/* 22 GPIO's */
 	{ }
 };

 U_BOOT_DRIVER(gpio_pm8916) = {
 	.name	= "gpio_pm8916",
 	.id	= UCLASS_GPIO,
 	.of_match = pm8916_gpio_ids,
 	.ofdata_to_platdata = pm8916_gpio_ofdata_to_platdata,
 	.probe	= pm8916_gpio_probe,
 	.ops	= &pm8916_gpio_ops,
 	.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
 };


 /* Add pmic buttons as GPIO as well - there is no generic way for now */
 #define PON_INT_RT_STS                        0x10
 #define KPDPWR_ON_INT_BIT                     0
 #define RESIN_ON_INT_BIT                      1

 static int pm8941_pwrkey_get_function(struct udevice *dev, unsigned offset)
 {
 	return GPIOF_INPUT;
 }

 static int pm8941_pwrkey_get_value(struct udevice *dev, unsigned offset)
 {
 	struct pm8916_gpio_bank *priv = dev_get_priv(dev);

 	int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS);

 	if (reg < 0)
 		return 0;

 	switch (offset) {
 	case 0: /* Power button */
 		return (reg & BIT(KPDPWR_ON_INT_BIT)) != 0;
 		break;
 	case 1: /* Reset button */
 	default:
 		return (reg & BIT(RESIN_ON_INT_BIT)) != 0;
 		break;
 	}
 }

 static const struct dm_gpio_ops pm8941_pwrkey_ops = {
 	.get_value		= pm8941_pwrkey_get_value,
 	.get_function		= pm8941_pwrkey_get_function,
 };

 static int pm8941_pwrkey_probe(struct udevice *dev)
 {
 	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
 	int reg;

 	priv->pid = devfdt_get_addr(dev);
 	if (priv->pid == FDT_ADDR_T_NONE)
 		return -EINVAL;

 	/* Do a sanity check */
 	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
 	if (reg != 0x1)
 		return -ENODEV;

 	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
 	if (reg != 0x1)
 		return -ENODEV;

 	return 0;
 }

 static int pm8941_pwrkey_ofdata_to_platdata(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

 	uc_priv->gpio_count = 2;
 	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
 	if (uc_priv->bank_name == NULL)
 		uc_priv->bank_name = "pm8916_key";

 	return 0;
 }

 static const struct udevice_id pm8941_pwrkey_ids[] = {
 	{ .compatible = "qcom,pm8916-pwrkey" },
 	{ .compatible = "qcom,pm8994-pwrkey" },
 	{ }
 };

 U_BOOT_DRIVER(pwrkey_pm8941) = {
 	.name	= "pwrkey_pm8916",
 	.id	= UCLASS_GPIO,
 	.of_match = pm8941_pwrkey_ids,
 	.ofdata_to_platdata = pm8941_pwrkey_ofdata_to_platdata,
 	.probe	= pm8941_pwrkey_probe,
 	.ops	= &pm8941_pwrkey_ops,
 	.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
 };
	/*
	* Qualcomm pm8916 pmic gpio driver - part of Qualcomm PM8916 PMIC
	*
	* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <dm.h>
	#include <power/pmic.h>
	#include <spmi/spmi.h>
	#include <asm/io.h>
	#include <asm/gpio.h>
	#include <linux/bitops.h>

	/* Register offset for each gpio */
	#define REG_OFFSET(x) ((x) * 0x100)

	/* Register maps */

	/* Type and subtype are shared for all pm8916 peripherals */
	#define REG_TYPE 0x4
	#define REG_SUBTYPE 0x5

	#define REG_STATUS 0x08
	#define REG_STATUS_VAL_MASK 0x1

	/* MODE_CTL */
	#define REG_CTL 0x40
	#define REG_CTL_MODE_MASK 0x70
	#define REG_CTL_MODE_INPUT 0x00
	#define REG_CTL_MODE_INOUT 0x20
	#define REG_CTL_MODE_OUTPUT 0x10
	#define REG_CTL_OUTPUT_MASK 0x0F

	#define REG_DIG_VIN_CTL 0x41
	#define REG_DIG_VIN_VIN0 0

	#define REG_DIG_PULL_CTL 0x42
	#define REG_DIG_PULL_NO_PU 0x5

	#define REG_DIG_OUT_CTL 0x45
	#define REG_DIG_OUT_CTL_CMOS (0x0 << 4)
	#define REG_DIG_OUT_CTL_DRIVE_L 0x1

	#define REG_EN_CTL 0x46
	#define REG_EN_CTL_ENABLE (1 << 7)

	struct pm8916_gpio_bank {
	uint32_t pid; /* Peripheral ID on SPMI bus */
	};

	static int pm8916_gpio_set_direction(struct udevice *dev, unsigned offset,
	bool input, int value)
	{
	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
	int ret;

	/* Disable the GPIO */
	ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
	REG_EN_CTL_ENABLE, 0);
	if (ret < 0)
	return ret;

	/* Select the mode */
	if (input)
	ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
	REG_CTL_MODE_INPUT);
	else
	ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
	REG_CTL_MODE_INOUT \| (value ? 1 : 0));
	if (ret < 0)
	return ret;

	/* Set the right pull (no pull) */
	ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL,
	REG_DIG_PULL_NO_PU);
	if (ret < 0)
	return ret;

	/* Configure output pin drivers if needed */
	if (!input) {
	/* Select the VIN - VIN0, pin is input so it doesn't matter */
	ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_VIN_CTL,
	REG_DIG_VIN_VIN0);
	if (ret < 0)
	return ret;

	/* Set the right dig out control */
	ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_OUT_CTL,
	REG_DIG_OUT_CTL_CMOS \|
	REG_DIG_OUT_CTL_DRIVE_L);
	if (ret < 0)
	return ret;
	}

	/* Enable the GPIO */
	return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
	REG_EN_CTL_ENABLE);
	}

	static int pm8916_gpio_direction_input(struct udevice *dev, unsigned offset)
	{
	return pm8916_gpio_set_direction(dev, offset, true, 0);
	}

	static int pm8916_gpio_direction_output(struct udevice *dev, unsigned offset,
	int value)
	{
	return pm8916_gpio_set_direction(dev, offset, false, value);
	}

	static int pm8916_gpio_get_function(struct udevice *dev, unsigned offset)
	{
	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
	int reg;

	/* Set the output value of the gpio */
	reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL);
	if (reg < 0)
	return reg;

	switch (reg & REG_CTL_MODE_MASK) {
	case REG_CTL_MODE_INPUT:
	return GPIOF_INPUT;
	case REG_CTL_MODE_INOUT: /* Fallthrough */
	case REG_CTL_MODE_OUTPUT:
	return GPIOF_OUTPUT;
	default:
	return GPIOF_UNKNOWN;
	}
	}

	static int pm8916_gpio_get_value(struct udevice *dev, unsigned offset)
	{
	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
	int reg;

	reg = pmic_reg_read(dev->parent, gpio_base + REG_STATUS);
	if (reg < 0)
	return reg;

	return !!(reg & REG_STATUS_VAL_MASK);
	}

	static int pm8916_gpio_set_value(struct udevice *dev, unsigned offset,
	int value)
	{
	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
	uint32_t gpio_base = priv->pid + REG_OFFSET(offset);

	/* Set the output value of the gpio */
	return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
	REG_CTL_OUTPUT_MASK, !!value);
	}

	static const struct dm_gpio_ops pm8916_gpio_ops = {
	.direction_input = pm8916_gpio_direction_input,
	.direction_output = pm8916_gpio_direction_output,
	.get_value = pm8916_gpio_get_value,
	.set_value = pm8916_gpio_set_value,
	.get_function = pm8916_gpio_get_function,
	};

	static int pm8916_gpio_probe(struct udevice *dev)
	{
	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
	int reg;

	priv->pid = dev_read_addr(dev);
	if (priv->pid == FDT_ADDR_T_NONE)
	return -EINVAL;

	/* Do a sanity check */
	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
	if (reg != 0x10)
	return -ENODEV;

	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
	if (reg != 0x5 && reg != 0x1)
	return -ENODEV;

	return 0;
	}

	static int pm8916_gpio_ofdata_to_platdata(struct udevice *dev)
	{
	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

	uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 0);
	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
	if (uc_priv->bank_name == NULL)
	uc_priv->bank_name = "pm8916";

	return 0;
	}

	static const struct udevice_id pm8916_gpio_ids[] = {
	{ .compatible = "qcom,pm8916-gpio" },
	{ .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */
	{ }
	};

	U_BOOT_DRIVER(gpio_pm8916) = {
	.name = "gpio_pm8916",
	.id = UCLASS_GPIO,
	.of_match = pm8916_gpio_ids,
	.ofdata_to_platdata = pm8916_gpio_ofdata_to_platdata,
	.probe = pm8916_gpio_probe,
	.ops = &pm8916_gpio_ops,
	.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
	};


	/* Add pmic buttons as GPIO as well - there is no generic way for now */
	#define PON_INT_RT_STS 0x10
	#define KPDPWR_ON_INT_BIT 0
	#define RESIN_ON_INT_BIT 1

	static int pm8941_pwrkey_get_function(struct udevice *dev, unsigned offset)
	{
	return GPIOF_INPUT;
	}

	static int pm8941_pwrkey_get_value(struct udevice *dev, unsigned offset)
	{
	struct pm8916_gpio_bank *priv = dev_get_priv(dev);

	int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS);

	if (reg < 0)
	return 0;

	switch (offset) {
	case 0: /* Power button */
	return (reg & BIT(KPDPWR_ON_INT_BIT)) != 0;
	break;
	case 1: /* Reset button */
	default:
	return (reg & BIT(RESIN_ON_INT_BIT)) != 0;
	break;
	}
	}

	static const struct dm_gpio_ops pm8941_pwrkey_ops = {
	.get_value = pm8941_pwrkey_get_value,
	.get_function = pm8941_pwrkey_get_function,
	};

	static int pm8941_pwrkey_probe(struct udevice *dev)
	{
	struct pm8916_gpio_bank *priv = dev_get_priv(dev);
	int reg;

	priv->pid = devfdt_get_addr(dev);
	if (priv->pid == FDT_ADDR_T_NONE)
	return -EINVAL;

	/* Do a sanity check */
	reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
	if (reg != 0x1)
	return -ENODEV;

	reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
	if (reg != 0x1)
	return -ENODEV;

	return 0;
	}

	static int pm8941_pwrkey_ofdata_to_platdata(struct udevice *dev)
	{
	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

	uc_priv->gpio_count = 2;
	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
	if (uc_priv->bank_name == NULL)
	uc_priv->bank_name = "pm8916_key";

	return 0;
	}

	static const struct udevice_id pm8941_pwrkey_ids[] = {
	{ .compatible = "qcom,pm8916-pwrkey" },
	{ .compatible = "qcom,pm8994-pwrkey" },
	{ }
	};

	U_BOOT_DRIVER(pwrkey_pm8941) = {
	.name = "pwrkey_pm8916",
	.id = UCLASS_GPIO,
	.of_match = pm8941_pwrkey_ids,
	.ofdata_to_platdata = pm8941_pwrkey_ofdata_to_platdata,
	.probe = pm8941_pwrkey_probe,
	.ops = &pm8941_pwrkey_ops,
	.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
	};