| /* |
| * Copyright (C) 2015 Marvell International Ltd. |
| * |
| * MVEBU USB HOST xHCI Controller |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <usb.h> |
| #include <power/regulator.h> |
| #include <asm/gpio.h> |
| |
| #include "xhci.h" |
| |
| struct mvebu_xhci_platdata { |
| fdt_addr_t hcd_base; |
| }; |
| |
| /** |
| * Contains pointers to register base addresses |
| * for the usb controller. |
| */ |
| struct mvebu_xhci { |
| struct xhci_ctrl ctrl; /* Needs to come first in this struct! */ |
| struct usb_platdata usb_plat; |
| struct xhci_hccr *hcd; |
| }; |
| |
| /* |
| * Dummy implementation that can be overwritten by a board |
| * specific function |
| */ |
| __weak int board_xhci_enable(fdt_addr_t base) |
| { |
| return 0; |
| } |
| |
| static int xhci_usb_probe(struct udevice *dev) |
| { |
| struct mvebu_xhci_platdata *plat = dev_get_platdata(dev); |
| struct mvebu_xhci *ctx = dev_get_priv(dev); |
| struct xhci_hcor *hcor; |
| int len, ret; |
| struct udevice *regulator; |
| |
| ctx->hcd = (struct xhci_hccr *)plat->hcd_base; |
| len = HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase)); |
| hcor = (struct xhci_hcor *)((uintptr_t)ctx->hcd + len); |
| |
| ret = device_get_supply_regulator(dev, "vbus-supply", ®ulator); |
| if (!ret) { |
| ret = regulator_set_enable(regulator, true); |
| if (ret) { |
| printf("Failed to turn ON the VBUS regulator\n"); |
| return ret; |
| } |
| } |
| |
| /* Enable USB xHCI (VBUS, reset etc) in board specific code */ |
| board_xhci_enable(devfdt_get_addr_index(dev, 1)); |
| |
| return xhci_register(dev, ctx->hcd, hcor); |
| } |
| |
| static int xhci_usb_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct mvebu_xhci_platdata *plat = dev_get_platdata(dev); |
| |
| /* |
| * Get the base address for XHCI controller from the device node |
| */ |
| plat->hcd_base = devfdt_get_addr(dev); |
| if (plat->hcd_base == FDT_ADDR_T_NONE) { |
| debug("Can't get the XHCI register base address\n"); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| static const struct udevice_id xhci_usb_ids[] = { |
| { .compatible = "marvell,armada3700-xhci" }, |
| { .compatible = "marvell,armada-380-xhci" }, |
| { .compatible = "marvell,armada-8k-xhci" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(usb_xhci) = { |
| .name = "xhci_mvebu", |
| .id = UCLASS_USB, |
| .of_match = xhci_usb_ids, |
| .ofdata_to_platdata = xhci_usb_ofdata_to_platdata, |
| .probe = xhci_usb_probe, |
| .remove = xhci_deregister, |
| .ops = &xhci_usb_ops, |
| .platdata_auto_alloc_size = sizeof(struct mvebu_xhci_platdata), |
| .priv_auto_alloc_size = sizeof(struct mvebu_xhci), |
| .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| }; |