blob: 947b73fab29ba16acf6a14a564b24a800e04f260 [file] [log] [blame]
if ARCH_MX6
config MX6_SMP
bool
select ARM_ERRATA_751472
select ARM_ERRATA_761320
select ARM_ERRATA_794072
select ARM_ERRATA_845369
select MP
config MX6
bool
default y
select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
select GPT_TIMER if !MX6UL && !MX6ULL
imply CMD_FUSE
choice
prompt "i.MX6 SoC select"
config MX6D
bool "i.MX 6Dual SoC support"
select HAS_CAAM
select MX6_SMP
config MX6DL
bool "i.MX 6DualLite SoC support"
select HAS_CAAM
select MX6_SMP
config MX6Q
bool "i.MX 6Quad SoC support"
select HAS_CAAM
select MX6_SMP
config MX6QDL
bool "i.MX 6Dual and 6Quad SoC support"
select HAS_CAAM
select MX6_SMP
config MX6S
bool "i.MX 6Solo SoC support"
select HAS_CAAM
config MX6SL
bool "i.MX 6SoloLite SoC support"
config MX6SX
bool "i.MX 6SoloX SoC support"
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
config MX6SLL
bool "i.MX 6SLL SoC support"
select ROM_UNIFIED_SECTIONS
config MX6UL
bool "i.MX 6UltraLite SoC support"
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
select SYS_L2CACHE_OFF
config MX6ULL
bool "i.MX 6ULL SoC support"
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
select SYS_L2CACHE_OFF
endchoice
config MX6UL_LITESOM
bool
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
config MX6UL_OPOS6UL
bool
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_MMC
select DM_THERMAL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
imply CMD_DM
config MX6_OCRAM_256KB
bool "Support 256KB OCRAM"
depends on MX6D || MX6Q
help
Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series
of chips, such as for SPL. The OCRAM of the Lite series of chips is
only 128KB, so using this option will prevent the resulting code from
working on those chips.
config MX6_DDRCAL
bool "Include dynamic DDR calibration routines"
depends on SPL
help
Say "Y" if your board uses dynamic (per-boot) DDR calibration.
If unsure, say N.
choice
prompt "MX6 board select"
optional
config TARGET_APALIS_IMX6
bool "Toradex Apalis iMX6 board"
depends on MX6Q
select BOARD_LATE_INIT
select DM
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
imply CMD_SATA
config TARGET_ARISTAINETOS2C
bool "Support aristainetos2-revC"
depends on MX6DL
select BOARD_LATE_INIT
select SYS_I2C_MXC
select MXC_UART
select FEC_MXC
select DM
imply CMD_SATA
imply CMD_DM
config TARGET_ARISTAINETOS2CCSLB
bool "Support aristainetos2-revC CSL"
depends on MX6DL
select BOARD_LATE_INIT
select SYS_I2C_MXC
select MXC_UART
select FEC_MXC
select DM
imply CMD_SATA
imply CMD_DM
config TARGET_CM_FX6
bool "CM-FX6"
depends on MX6QDL
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_SERIAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_COLIBRI_IMX6
bool "Toradex Colibri iMX6 board"
select BOARD_LATE_INIT
select DM
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_COLIBRI_IMX6ULL
bool "Toradex Colibri iMX6ULL"
depends on MX6ULL
select BOARD_LATE_INIT
select DM
select DM_THERMAL
config TARGET_DART_6UL
bool "Variscite imx6ULL dart(DART-SOM-6ULL)"
depends on MX6ULL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
config TARGET_DHCOMIMX6
bool "dh_imx6"
depends on MX6QDL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
imply CMD_SPL
config TARGET_DISPLAY5
bool "LWN DISPLAY5 board"
depends on MX6Q
select DM
select DM_ETH
select DM_I2C
select DM_MMC
select DM_SPI
select DM_GPIO
select DM_SERIAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_GE_BX50V3
bool "General Electric Bx50v3"
depends on MX6Q
select BOARD_LATE_INIT
config TARGET_GE_B1X5V2
bool "General Electric B1x5v2"
depends on MX6QDL
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
config TARGET_GW_VENTANA
bool "gw_ventana"
depends on MX6QDL
select SUPPORT_SPL
select GATEWORKS_SC
select MISC
imply CMD_SATA
imply CMD_SPL
config TARGET_KONTRON_MX6UL
bool "Kontron Electronics SL/BL i.MX6UL/ULL (N63xx/N64xx)"
depends on MX6UL
select BINMAN
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_KOSAGI_NOVENA
bool "Kosagi Novena"
select BOARD_LATE_INIT
select DM_ETH
select DM_GPIO
select DM_MMC
select PCI
select DM_SCSI
select DM_VIDEO
select OF_CONTROL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MCCMON6
bool "mccmon6"
depends on MX6QDL
select SUPPORT_SPL
select DM
select DM_GPIO
select DM_ETH
select DM_SERIAL
select DM_I2C
select DM_SPI
imply CMD_DM
config TARGET_MX6CUBOXI
bool "Solid-run mx6 boards"
depends on MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_MX6LOGICPD
bool "Logic PD i.MX6 SOM"
depends on MX6Q
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_PMIC
select OF_CONTROL
imply CMD_DM
config TARGET_MX6MEMCAL
bool "mx6memcal"
depends on MX6QDL
select SUPPORT_SPL
help
The mx6memcal board is a virtual board that can be used to validate
and characterize the memory layout of a new design during the initial
development and pre-production stages.
config TARGET_MX6DL_MAMOJ
bool "Support BTicino Mamoj"
depends on MX6QDL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_PMIC
select DM_PMIC_PFUZE100
select DM_THERMAL
select OF_CONTROL
select PINCTRL
select SPL
select SPL_DM if SPL
select SPL_GPIO if SPL
select SPL_LIBCOMMON_SUPPORT if SPL
select SPL_LIBDISK_SUPPORT if SPL
select SPL_LIBGENERIC_SUPPORT if SPL
select SPL_MMC if SPL
select SPL_OF_CONTROL if SPL
select SPL_OF_LIBFDT if SPL
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SPL_SERIAL if SPL
select SPL_USB_GADGET if SPL
select SPL_USB_HOST if SPL
select SPL_USB_SDP_SUPPORT if SPL
select SPL_WATCHDOG if SPL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MX6Q_ENGICAM
bool "Support Engicam i.Core(RQS)"
depends on MX6QDL
select BOARD_LATE_INIT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
select SPL_OF_LIBFDT
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
depends on MX6QDL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
select FSL_CAAM
select ARCH_MISC_INIT
config TARGET_MX6SABRESD
bool "mx6sabresd"
depends on MX6QDL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
select FSL_CAAM
select ARCH_MISC_INIT
config TARGET_MX6SLEVK
bool "mx6slevk"
depends on MX6SL
select SUPPORT_SPL
config TARGET_MX6SLLEVK
bool "mx6sll evk"
depends on MX6SLL
select BOARD_LATE_INIT
select DM
select DM_THERMAL
imply CMD_DM
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
depends on MX6SX
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
select FSL_CAAM
select ARCH_MISC_INIT
config TARGET_MX6SXSABREAUTO
bool "mx6sxsabreauto"
depends on MX6SX
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
imply CMD_DM
config TARGET_MX6UL_9X9_EVK
bool "mx6ul_9x9_evk"
depends on MX6UL
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
select FSL_CAAM
select ARCH_MISC_INIT
config TARGET_MX6UL_14X14_EVK
bool "mx6ul_14x14_evk"
depends on MX6UL
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
select FSL_CAAM
select ARCH_MISC_INIT
config TARGET_MX6UL_ENGICAM
bool "Support Engicam GEAM6UL/Is.IoT"
depends on MX6UL
select BOARD_LATE_INIT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MX6ULL_14X14_EVK
bool "Support mx6ull_14x14_evk"
depends on MX6ULL
select BOARD_LATE_INIT
select DM
select DM_THERMAL
imply CMD_DM
config TARGET_MYS_6ULX
bool "MYiR MYS-6ULX"
depends on MX6ULL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
config TARGET_NITROGEN6X
bool "nitrogen6x"
depends on MX6DL || MX6Q || MX6QDL || MX6S
imply USB_ETHER_ASIX
imply USB_ETHER_MCS7830
imply USB_ETHER_SMSC95XX
imply USB_HOST_ETHER
config TARGET_NPI_IMX6ULL
bool "Seeed NPI-IMX6ULL"
depends on MX6ULL
select DM
select DM_ETH
select DM_MMC
select DM_GPIO
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
config TARGET_OPOS6ULDEV
bool "Armadeus OPOS6ULDev board"
depends on MX6UL
select MX6UL_OPOS6UL
config TARGET_PICO_IMX6
bool "PICO-IMX6"
depends on MX6QDL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_PICO_IMX6UL
bool "PICO-IMX6UL-EMMC"
depends on MX6UL
select DM
select SUPPORT_SPL
imply CMD_DM
config TARGET_LITEBOARD
bool "Grinn liteBoard (i.MX6UL)"
depends on MX6UL
select BOARD_LATE_INIT
select MX6UL_LITESOM
config TARGET_PCM058
bool "Phytec PCM058 i.MX6 Quad"
depends on MX6Q
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
select OF_CONTROL
imply CMD_DM
config TARGET_PCL063
bool "PHYTEC PCL063 (phyCORE-i.MX6UL)"
depends on MX6UL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
config TARGET_PCL063_ULL
bool "PHYTEC PCL063 (phyCORE-i.MX6ULL)"
depends on MX6ULL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
config TARGET_SOMLABS_VISIONSOM_6ULL
bool "visionsom-6ull"
depends on MX6ULL
select BOARD_LATE_INIT
select DM
select DM_ETH
select DM_GPIO
select DM_MMC
select DM_SERIAL
select DM_THERMAL
imply CMD_DM
config TARGET_TBS2910
bool "TBS2910 Matrix ARM mini PC"
depends on MX6Q
config TARGET_KP_IMX6Q_TPC
bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
depends on MX6QDL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select SPL_DM if SPL
select DM_THERMAL
select DM_MMC
select DM_ETH
select DM_REGULATOR
select SPL_DM_REGULATOR if SPL
select DM_SERIAL
select DM_I2C
select DM_GPIO
select SUPPORT_SPL
select SPL_SEPARATE_BSS if SPL
imply CMD_DM
imply CMD_SPL
config TARGET_TQMA6
bool "TQ-Systems TQMa6 board"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select MXC_SPI
select SPI
imply DM
imply DM_GPIO
imply DM_MMC
imply DM_SPI
imply DM_SPI_FLASH
imply DM_I2C
imply CMD_SF
imply CMD_DM
config TARGET_UDOO
bool "udoo"
depends on MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
imply CMD_DM
config TARGET_UDOO_NEO
bool "UDOO Neo"
depends on MX6SX
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_SOFTING_VINING_2000
bool "Softing VIN|ING 2000"
depends on MX6SX
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_WANDBOARD
bool "wandboard"
depends on MX6QDL
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_WARP
bool "WaRP"
depends on MX6SL
select BOARD_LATE_INIT
config TARGET_BRPPT2
bool "brppt2"
depends on MX6QDL
select BOARD_LATE_INIT
select OF_CONTROL
select SPL_OF_LIBFDT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select SUPPORT_SPL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
help
Support
B&R BRPPT2 platform
based on Freescale's iMX6 SoC
config TARGET_O4_IMX6ULL_NANO
bool "O4-iMX6ULL-NANO"
depends on MX6ULL
select BOARD_LATE_INIT
select DM
select DM_THERMAL
imply CMD_DM
help
Support for www.out4.ru O4-iMX6UL-NANO platform
based on Freescale's i.MX6UL/i.MX6ULL SoC.
endchoice
config SYS_SOC
default "mx6"
source "board/ge/bx50v3/Kconfig"
source "board/ge/b1x5v2/Kconfig"
source "board/aristainetos/Kconfig"
source "board/armadeus/opos6uldev/Kconfig"
source "board/boundary/nitrogen6x/Kconfig"
source "board/bticino/mamoj/Kconfig"
source "board/compulab/cm_fx6/Kconfig"
source "board/dhelectronics/dh_imx6/Kconfig"
source "board/embest/mx6boards/Kconfig"
source "board/engicam/imx6q/Kconfig"
source "board/engicam/imx6ul/Kconfig"
source "board/freescale/mx6memcal/Kconfig"
source "board/freescale/mx6sabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
source "board/freescale/mx6slevk/Kconfig"
source "board/freescale/mx6sllevk/Kconfig"
source "board/freescale/mx6sxsabresd/Kconfig"
source "board/freescale/mx6sxsabreauto/Kconfig"
source "board/freescale/mx6ul_14x14_evk/Kconfig"
source "board/freescale/mx6ullevk/Kconfig"
source "board/grinn/liteboard/Kconfig"
source "board/phytec/pcm058/Kconfig"
source "board/phytec/pcl063/Kconfig"
source "board/gateworks/gw_ventana/Kconfig"
source "board/kontron/sl-mx6ul/Kconfig"
source "board/kosagi/novena/Kconfig"
source "board/softing/vining_2000/Kconfig"
source "board/liebherr/display5/Kconfig"
source "board/liebherr/mccmon6/Kconfig"
source "board/logicpd/imx6/Kconfig"
source "board/solidrun/mx6cuboxi/Kconfig"
source "board/somlabs/visionsom-6ull/Kconfig"
source "board/technexion/pico-imx6/Kconfig"
source "board/technexion/pico-imx6ul/Kconfig"
source "board/tbs/tbs2910/Kconfig"
source "board/tq/tqma6/Kconfig"
source "board/toradex/apalis_imx6/Kconfig"
source "board/toradex/colibri_imx6/Kconfig"
source "board/toradex/colibri-imx6ull/Kconfig"
source "board/k+p/kp_imx6q_tpc/Kconfig"
source "board/udoo/Kconfig"
source "board/udoo/neo/Kconfig"
source "board/wandboard/Kconfig"
source "board/warp/Kconfig"
source "board/BuR/brppt2/Kconfig"
source "board/out4/o4-imx6ull-nano/Kconfig"
endif