drivers/power/regulator/bd71837.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2019 ROHM Semiconductors
  *
  * ROHM BD71837 regulator driver
  */

 #include <common.h>
 #include <dm.h>
 #include <log.h>
 #include <linux/bitops.h>
 #include <power/bd71837.h>
 #include <power/pmic.h>
 #include <power/regulator.h>

 #define HW_STATE_CONTROL 0
 #define DEBUG

 /**
  * struct bd71837_vrange - describe linear range of voltages
  *
  * @min_volt:	smallest voltage in range
  * @step:	how much voltage changes at each selector step
  * @min_sel:	smallest selector in the range
  * @max_sel:	maximum selector in the range
  * @rangeval:	register value used to select this range if selectible
  *		ranges are supported
  */
 struct bd71837_vrange {
 	unsigned int	min_volt;
 	unsigned int	step;
 	u8		min_sel;
 	u8		max_sel;
 	u8		rangeval;
 };

 /**
  * struct bd71837_platdata - describe regulator control registers
  *
  * @name:	name of the regulator. Used for matching the dt-entry
  * @enable_reg:	register address used to enable/disable regulator
  * @enablemask:	register mask used to enable/disable regulator
  * @volt_reg:	register address used to configure regulator voltage
  * @volt_mask:	register mask used to configure regulator voltage
  * @ranges:	pointer to ranges of regulator voltages and matching register
  *		values
  * @numranges:	number of voltage ranges pointed by ranges
  * @rangemask:	mask for selecting used ranges if multiple ranges are supported
  * @sel_mask:	bit to toggle in order to transfer the register control to SW
  * @dvs:	whether the voltage can be changed when regulator is enabled
  */
 struct bd71837_platdata {
 	const char		*name;
 	u8			enable_reg;
 	u8			enablemask;
 	u8			volt_reg;
 	u8			volt_mask;
 	struct bd71837_vrange	*ranges;
 	unsigned int		numranges;
 	u8			rangemask;
 	u8			sel_mask;
 	bool			dvs;
 };

 #define BD_RANGE(_min, _vstep, _sel_low, _sel_hi, _range_sel) \
 { \
 	.min_volt = (_min), .step = (_vstep), .min_sel = (_sel_low), \
 	.max_sel = (_sel_hi), .rangeval = (_range_sel) \
 }

 #define BD_DATA(_name, enreg, enmask, vreg, vmask, _range, rmask, _dvs, sel) \
 { \
 	.name = (_name), .enable_reg = (enreg), .enablemask = (enmask), \
 	.volt_reg = (vreg), .volt_mask = (vmask), .ranges = (_range), \
 	.numranges = ARRAY_SIZE(_range), .rangemask = (rmask), .dvs = (_dvs), \
 	.sel_mask = (sel) \
 }

 static struct bd71837_vrange dvs_buck_vranges[] = {
 	BD_RANGE(700000, 10000, 0, 0x3c, 0),
 	BD_RANGE(1300000, 0, 0x3d, 0x3f, 0),
 };

 static struct bd71837_vrange bd71847_buck3_vranges[] = {
 	BD_RANGE(700000, 100000, 0x00, 0x03, 0),
 	BD_RANGE(1050000, 50000, 0x04, 0x05, 0),
 	BD_RANGE(1200000, 150000, 0x06, 0x07, 0),
 	BD_RANGE(550000, 50000, 0x0, 0x7, 0x40),
 	BD_RANGE(675000, 100000, 0x0, 0x3, 0x80),
 	BD_RANGE(1025000, 50000, 0x4, 0x5, 0x80),
 	BD_RANGE(1175000, 150000, 0x6, 0x7, 0x80),
 };

 static struct bd71837_vrange bd71847_buck4_vranges[] = {
 	BD_RANGE(3000000, 100000, 0x00, 0x03, 0),
 	BD_RANGE(2600000, 100000, 0x00, 0x03, 40),
 };

 static struct bd71837_vrange bd71837_buck5_vranges[] = {
 	BD_RANGE(700000, 100000, 0, 0x3, 0),
 	BD_RANGE(1050000, 50000, 0x04, 0x05, 0),
 	BD_RANGE(1200000, 150000, 0x06, 0x07, 0),
 	BD_RANGE(675000, 100000, 0x0, 0x3, 0x80),
 	BD_RANGE(1025000, 50000, 0x04, 0x05, 0x80),
 	BD_RANGE(1175000, 150000, 0x06, 0x07, 0x80),
 };

 static struct bd71837_vrange bd71837_buck6_vranges[] = {
 	BD_RANGE(3000000, 100000, 0x00, 0x03, 0),
 };

 static struct bd71837_vrange nodvs_buck3_vranges[] = {
 	BD_RANGE(1605000, 90000, 0, 1, 0),
 	BD_RANGE(1755000, 45000, 2, 4, 0),
 	BD_RANGE(1905000, 45000, 5, 7, 0),
 };

 static struct bd71837_vrange nodvs_buck4_vranges[] = {
 	BD_RANGE(800000, 10000, 0x00, 0x3C, 0),
 };

 static struct bd71837_vrange ldo1_vranges[] = {
 	BD_RANGE(3000000, 100000, 0x00, 0x03, 0),
 	BD_RANGE(1600000, 100000, 0x00, 0x03, 0x20),
 };

 static struct bd71837_vrange ldo2_vranges[] = {
 	BD_RANGE(900000, 0, 0, 0, 0),
 	BD_RANGE(800000, 0, 1, 1, 0),
 };

 static struct bd71837_vrange ldo3_vranges[] = {
 	BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
 };

 static struct bd71837_vrange ldo4_vranges[] = {
 	BD_RANGE(900000, 100000, 0x00, 0x09, 0),
 };

 static struct bd71837_vrange bd71837_ldo5_vranges[] = {
 	BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
 };

 static struct bd71837_vrange bd71847_ldo5_vranges[] = {
 	BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
 	BD_RANGE(800000, 100000, 0x00, 0x0f, 0x20),
 };

 static struct bd71837_vrange ldo6_vranges[] = {
 	BD_RANGE(900000, 100000, 0x00, 0x09, 0),
 };

 static struct bd71837_vrange ldo7_vranges[] = {
 	BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
 };

 /*
  * We use enable mask 'HW_STATE_CONTROL' to indicate that this regulator
  * must not be enabled or disabled by SW. The typical use-case for BD71837
  * is powering NXP i.MX8. In this use-case we (for now) only allow control
  * for BUCK3 and BUCK4 which are not boot critical.
  */
 static struct bd71837_platdata bd71837_reg_data[] = {
 /* Bucks 1-4 which support dynamic voltage scaling */
 	BD_DATA("BUCK1", BD718XX_BUCK1_CTRL, HW_STATE_CONTROL,
 		BD718XX_BUCK1_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
 		true, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK2", BD718XX_BUCK2_CTRL, HW_STATE_CONTROL,
 		BD718XX_BUCK2_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
 		true, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK3", BD71837_BUCK3_CTRL, BD718XX_BUCK_EN,
 		BD71837_BUCK3_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
 		true, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK4", BD71837_BUCK4_CTRL, BD718XX_BUCK_EN,
 		BD71837_BUCK4_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
 		true, BD718XX_BUCK_SEL),
 /* Bucks 5-8 which do not support dynamic voltage scaling */
 	BD_DATA("BUCK5", BD718XX_1ST_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
 		BD718XX_1ST_NODVS_BUCK_VOLT, BD718XX_1ST_NODVS_BUCK_MASK,
 		bd71837_buck5_vranges, 0x80, false, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK6", BD718XX_2ND_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
 		BD718XX_2ND_NODVS_BUCK_VOLT, BD71837_BUCK6_MASK,
 		bd71837_buck6_vranges, 0, false, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK7", BD718XX_3RD_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
 		BD718XX_3RD_NODVS_BUCK_VOLT, BD718XX_3RD_NODVS_BUCK_MASK,
 		nodvs_buck3_vranges, 0, false, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK8", BD718XX_4TH_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
 		BD718XX_4TH_NODVS_BUCK_VOLT, BD718XX_4TH_NODVS_BUCK_MASK,
 		nodvs_buck4_vranges, 0, false, BD718XX_BUCK_SEL),
 /* LDOs */
 	BD_DATA("LDO1", BD718XX_LDO1_VOLT, HW_STATE_CONTROL, BD718XX_LDO1_VOLT,
 		BD718XX_LDO1_MASK, ldo1_vranges, 0x20, false, BD718XX_LDO_SEL),
 	BD_DATA("LDO2", BD718XX_LDO2_VOLT, HW_STATE_CONTROL, BD718XX_LDO2_VOLT,
 		BD718XX_LDO2_MASK, ldo2_vranges, 0, false, BD718XX_LDO_SEL),
 	BD_DATA("LDO3", BD718XX_LDO3_VOLT, HW_STATE_CONTROL, BD718XX_LDO3_VOLT,
 		BD718XX_LDO3_MASK, ldo3_vranges, 0, false, BD718XX_LDO_SEL),
 	BD_DATA("LDO4", BD718XX_LDO4_VOLT, HW_STATE_CONTROL, BD718XX_LDO4_VOLT,
 		BD718XX_LDO4_MASK, ldo4_vranges, 0, false, BD718XX_LDO_SEL),
 	BD_DATA("LDO5", BD718XX_LDO5_VOLT, HW_STATE_CONTROL, BD718XX_LDO5_VOLT,
 		BD71837_LDO5_MASK, bd71837_ldo5_vranges, 0, false,
 		BD718XX_LDO_SEL),
 	BD_DATA("LDO6", BD718XX_LDO6_VOLT, HW_STATE_CONTROL, BD718XX_LDO6_VOLT,
 		BD718XX_LDO6_MASK, ldo6_vranges, 0, false, BD718XX_LDO_SEL),
 	BD_DATA("LDO7", BD71837_LDO7_VOLT, HW_STATE_CONTROL, BD71837_LDO7_VOLT,
 		BD71837_LDO7_MASK, ldo7_vranges, 0, false, BD718XX_LDO_SEL),
 };

 static struct bd71837_platdata bd71847_reg_data[] = {
 /* Bucks 1 and 2 which support dynamic voltage scaling */
 	BD_DATA("BUCK1", BD718XX_BUCK1_CTRL, HW_STATE_CONTROL,
 		BD718XX_BUCK1_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
 		true, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK2", BD718XX_BUCK2_CTRL, HW_STATE_CONTROL,
 		BD718XX_BUCK2_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
 		true, BD718XX_BUCK_SEL),
 /* Bucks 3-6 which do not support dynamic voltage scaling */
 	BD_DATA("BUCK3", BD718XX_1ST_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
 		BD718XX_1ST_NODVS_BUCK_VOLT, BD718XX_1ST_NODVS_BUCK_MASK,
 		bd71847_buck3_vranges, 0xc0, false, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK4", BD718XX_2ND_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
 		BD718XX_2ND_NODVS_BUCK_VOLT, BD71837_BUCK6_MASK,
 		bd71847_buck4_vranges, 0x40, false, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK5", BD718XX_3RD_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
 		BD718XX_3RD_NODVS_BUCK_VOLT, BD718XX_3RD_NODVS_BUCK_MASK,
 		nodvs_buck3_vranges, 0, false, BD718XX_BUCK_SEL),
 	BD_DATA("BUCK6", BD718XX_4TH_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
 		BD718XX_4TH_NODVS_BUCK_VOLT, BD718XX_4TH_NODVS_BUCK_MASK,
 		nodvs_buck4_vranges, 0, false, BD718XX_BUCK_SEL),
 /* LDOs */
 	BD_DATA("LDO1", BD718XX_LDO1_VOLT, HW_STATE_CONTROL, BD718XX_LDO1_VOLT,
 		BD718XX_LDO1_MASK, ldo1_vranges, 0x20, false, BD718XX_LDO_SEL),
 	BD_DATA("LDO2", BD718XX_LDO2_VOLT, HW_STATE_CONTROL, BD718XX_LDO2_VOLT,
 		BD718XX_LDO2_MASK, ldo2_vranges, 0, false, BD718XX_LDO_SEL),
 	BD_DATA("LDO3", BD718XX_LDO3_VOLT, HW_STATE_CONTROL, BD718XX_LDO3_VOLT,
 		BD718XX_LDO3_MASK, ldo3_vranges, 0, false, BD718XX_LDO_SEL),
 	BD_DATA("LDO4", BD718XX_LDO4_VOLT, HW_STATE_CONTROL, BD718XX_LDO4_VOLT,
 		BD718XX_LDO4_MASK, ldo4_vranges, 0, false, BD718XX_LDO_SEL),
 	BD_DATA("LDO5", BD718XX_LDO5_VOLT, HW_STATE_CONTROL, BD718XX_LDO5_VOLT,
 		BD71847_LDO5_MASK, bd71847_ldo5_vranges, 0x20, false,
 		BD718XX_LDO_SEL),
 	BD_DATA("LDO6", BD718XX_LDO6_VOLT, HW_STATE_CONTROL, BD718XX_LDO6_VOLT,
 		BD718XX_LDO6_MASK, ldo6_vranges, 0, false, BD718XX_LDO_SEL),
 };

 static int vrange_find_value(struct bd71837_vrange *r, unsigned int sel,
 			     unsigned int *val)
 {
 	if (!val || sel < r->min_sel || sel > r->max_sel)
 		return -EINVAL;

 	*val = r->min_volt + r->step * (sel - r->min_sel);
 	return 0;
 }

 static int vrange_find_selector(struct bd71837_vrange *r, int val,
 				unsigned int *sel)
 {
 	int ret = -EINVAL;
 	int num_vals = r->max_sel - r->min_sel + 1;

 	if (val >= r->min_volt &&
 	    val <= r->min_volt + r->step * (num_vals - 1)) {
 		if (r->step) {
 			*sel = r->min_sel + ((val - r->min_volt) / r->step);
 			ret = 0;
 		} else {
 			*sel = r->min_sel;
 			ret = 0;
 		}
 	}
 	return ret;
 }

 static int bd71837_get_enable(struct udevice *dev)
 {
 	int val;
 	struct bd71837_platdata *plat = dev_get_plat(dev);

 	/*
 	 * boot critical regulators on bd71837 must not be controlled by sw
 	 * due to the 'feature' which leaves power rails down if bd71837 is
 	 * reseted to snvs state. hence we can't get the state here.
 	 *
 	 * if we are alive it means we probably are on run state and
 	 * if the regulator can't be controlled we can assume it is
 	 * enabled.
 	 */
 	if (plat->enablemask == HW_STATE_CONTROL)
 		return 1;

 	val = pmic_reg_read(dev->parent, plat->enable_reg);
 	if (val < 0)
 		return val;

 	return (val & plat->enablemask);
 }

 static int bd71837_set_enable(struct udevice *dev, bool enable)
 {
 	int val = 0;
 	struct bd71837_platdata *plat = dev_get_plat(dev);

 	/*
 	 * boot critical regulators on bd71837 must not be controlled by sw
 	 * due to the 'feature' which leaves power rails down if bd71837 is
 	 * reseted to snvs state. Hence we can't set the state here.
 	 */
 	if (plat->enablemask == HW_STATE_CONTROL)
 		return -EINVAL;

 	if (enable)
 		val = plat->enablemask;

 	return pmic_clrsetbits(dev->parent, plat->enable_reg, plat->enablemask,
 			       val);
 }

 static int bd71837_set_value(struct udevice *dev, int uvolt)
 {
 	unsigned int sel;
 	unsigned int range;
 	int i;
 	int found = 0;
 	struct bd71837_platdata *plat = dev_get_plat(dev);

 	/*
 	 * An under/overshooting may occur if voltage is changed for other
 	 * regulators but buck 1,2,3 or 4 when regulator is enabled. Prevent
 	 * change to protect the HW
 	 */
 	if (!plat->dvs)
 		if (bd71837_get_enable(dev)) {
 			pr_err("Only DVS bucks can be changed when enabled\n");
 			return -EINVAL;
 		}

 	for (i = 0; i < plat->numranges; i++) {
 		struct bd71837_vrange *r = &plat->ranges[i];

 		found = !vrange_find_selector(r, uvolt, &sel);
 		if (found) {
 			unsigned int tmp;

 			/*
 			 * We require exactly the requested value to be
 			 * supported - this can be changed later if needed
 			 */
 			range = r->rangeval;
 			found = !vrange_find_value(r, sel, &tmp);
 			if (found && tmp == uvolt)
 				break;
 			found = 0;
 		}
 	}

 	if (!found)
 		return -EINVAL;

 	sel <<= ffs(plat->volt_mask) - 1;

 	if (plat->rangemask)
 		sel |= range;

 	return pmic_clrsetbits(dev->parent, plat->volt_reg, plat->volt_mask |
 			       plat->rangemask, sel);
 }

 static int bd71837_get_value(struct udevice *dev)
 {
 	unsigned int reg, range;
 	unsigned int tmp;
 	struct bd71837_platdata *plat = dev_get_plat(dev);
 	int i;

 	reg = pmic_reg_read(dev->parent, plat->volt_reg);
 	if (((int)reg) < 0)
 		return reg;

 	range = reg & plat->rangemask;

 	reg &= plat->volt_mask;
 	reg >>= ffs(plat->volt_mask) - 1;

 	for (i = 0; i < plat->numranges; i++) {
 		struct bd71837_vrange *r = &plat->ranges[i];

 		if (plat->rangemask && ((plat->rangemask & range) !=
 		    r->rangeval))
 			continue;

 		if (!vrange_find_value(r, reg, &tmp))
 			return tmp;
 	}

 	pr_err("Unknown voltage value read from pmic\n");

 	return -EINVAL;
 }

 static int bd71837_regulator_probe(struct udevice *dev)
 {
 	struct bd71837_platdata *plat = dev_get_plat(dev);
 	int i, ret;
 	struct dm_regulator_uclass_plat *uc_pdata;
 	int type;
 	struct bd71837_platdata *init_data;
 	int data_amnt;

 	type = dev_get_driver_data(dev_get_parent(dev));

 	switch (type) {
 	case ROHM_CHIP_TYPE_BD71837:
 		init_data = bd71837_reg_data;
 		data_amnt = ARRAY_SIZE(bd71837_reg_data);
 		break;
 	case ROHM_CHIP_TYPE_BD71847:
 		init_data = bd71847_reg_data;
 		data_amnt = ARRAY_SIZE(bd71847_reg_data);
 		break;
 	default:
 		debug("Unknown PMIC type\n");
 		init_data = NULL;
 		data_amnt = 0;
 		break;
 	}

 	for (i = 0; i < data_amnt; i++) {
 		if (!strcmp(dev->name, init_data[i].name)) {
 			*plat = init_data[i];
 			if (plat->enablemask != HW_STATE_CONTROL) {
 				/*
 				 * Take the regulator under SW control. Ensure
 				 * the initial state matches dt flags and then
 				 * write the SEL bit
 				 */
 				uc_pdata = dev_get_uclass_plat(dev);
 				ret = bd71837_set_enable(dev,
 							 !!(uc_pdata->boot_on ||
 							 uc_pdata->always_on));
 				if (ret)
 					return ret;

 				return pmic_clrsetbits(dev->parent,
 						      plat->enable_reg,
 						      plat->sel_mask,
 						      plat->sel_mask);
 			}
 			return 0;
 		}
 	}

 	pr_err("Unknown regulator '%s'\n", dev->name);

 	return -ENOENT;
 }

 static const struct dm_regulator_ops bd71837_regulator_ops = {
 	.get_value  = bd71837_get_value,
 	.set_value  = bd71837_set_value,
 	.get_enable = bd71837_get_enable,
 	.set_enable = bd71837_set_enable,
 };

 U_BOOT_DRIVER(bd71837_regulator) = {
 	.name = BD718XX_REGULATOR_DRIVER,
 	.id = UCLASS_REGULATOR,
 	.ops = &bd71837_regulator_ops,
 	.probe = bd71837_regulator_probe,
 	.plat_auto	= sizeof(struct bd71837_platdata),
 };
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* Copyright (C) 2019 ROHM Semiconductors
	*
	* ROHM BD71837 regulator driver
	*/

	#include <common.h>
	#include <dm.h>
	#include <log.h>
	#include <linux/bitops.h>
	#include <power/bd71837.h>
	#include <power/pmic.h>
	#include <power/regulator.h>

	#define HW_STATE_CONTROL 0
	#define DEBUG

	/**
	* struct bd71837_vrange - describe linear range of voltages
	*
	* @min_volt: smallest voltage in range
	* @step: how much voltage changes at each selector step
	* @min_sel: smallest selector in the range
	* @max_sel: maximum selector in the range
	* @rangeval: register value used to select this range if selectible
	* ranges are supported
	*/
	struct bd71837_vrange {
	unsigned int min_volt;
	unsigned int step;
	u8 min_sel;
	u8 max_sel;
	u8 rangeval;
	};

	/**
	* struct bd71837_platdata - describe regulator control registers
	*
	* @name: name of the regulator. Used for matching the dt-entry
	* @enable_reg: register address used to enable/disable regulator
	* @enablemask: register mask used to enable/disable regulator
	* @volt_reg: register address used to configure regulator voltage
	* @volt_mask: register mask used to configure regulator voltage
	* @ranges: pointer to ranges of regulator voltages and matching register
	* values
	* @numranges: number of voltage ranges pointed by ranges
	* @rangemask: mask for selecting used ranges if multiple ranges are supported
	* @sel_mask: bit to toggle in order to transfer the register control to SW
	* @dvs: whether the voltage can be changed when regulator is enabled
	*/
	struct bd71837_platdata {
	const char *name;
	u8 enable_reg;
	u8 enablemask;
	u8 volt_reg;
	u8 volt_mask;
	struct bd71837_vrange *ranges;
	unsigned int numranges;
	u8 rangemask;
	u8 sel_mask;
	bool dvs;
	};

	#define BD_RANGE(_min, _vstep, _sel_low, _sel_hi, _range_sel) \
	{ \
	.min_volt = (_min), .step = (_vstep), .min_sel = (_sel_low), \
	.max_sel = (_sel_hi), .rangeval = (_range_sel) \
	}

	#define BD_DATA(_name, enreg, enmask, vreg, vmask, _range, rmask, _dvs, sel) \
	{ \
	.name = (_name), .enable_reg = (enreg), .enablemask = (enmask), \
	.volt_reg = (vreg), .volt_mask = (vmask), .ranges = (_range), \
	.numranges = ARRAY_SIZE(_range), .rangemask = (rmask), .dvs = (_dvs), \
	.sel_mask = (sel) \
	}

	static struct bd71837_vrange dvs_buck_vranges[] = {
	BD_RANGE(700000, 10000, 0, 0x3c, 0),
	BD_RANGE(1300000, 0, 0x3d, 0x3f, 0),
	};

	static struct bd71837_vrange bd71847_buck3_vranges[] = {
	BD_RANGE(700000, 100000, 0x00, 0x03, 0),
	BD_RANGE(1050000, 50000, 0x04, 0x05, 0),
	BD_RANGE(1200000, 150000, 0x06, 0x07, 0),
	BD_RANGE(550000, 50000, 0x0, 0x7, 0x40),
	BD_RANGE(675000, 100000, 0x0, 0x3, 0x80),
	BD_RANGE(1025000, 50000, 0x4, 0x5, 0x80),
	BD_RANGE(1175000, 150000, 0x6, 0x7, 0x80),
	};

	static struct bd71837_vrange bd71847_buck4_vranges[] = {
	BD_RANGE(3000000, 100000, 0x00, 0x03, 0),
	BD_RANGE(2600000, 100000, 0x00, 0x03, 40),
	};

	static struct bd71837_vrange bd71837_buck5_vranges[] = {
	BD_RANGE(700000, 100000, 0, 0x3, 0),
	BD_RANGE(1050000, 50000, 0x04, 0x05, 0),
	BD_RANGE(1200000, 150000, 0x06, 0x07, 0),
	BD_RANGE(675000, 100000, 0x0, 0x3, 0x80),
	BD_RANGE(1025000, 50000, 0x04, 0x05, 0x80),
	BD_RANGE(1175000, 150000, 0x06, 0x07, 0x80),
	};

	static struct bd71837_vrange bd71837_buck6_vranges[] = {
	BD_RANGE(3000000, 100000, 0x00, 0x03, 0),
	};

	static struct bd71837_vrange nodvs_buck3_vranges[] = {
	BD_RANGE(1605000, 90000, 0, 1, 0),
	BD_RANGE(1755000, 45000, 2, 4, 0),
	BD_RANGE(1905000, 45000, 5, 7, 0),
	};

	static struct bd71837_vrange nodvs_buck4_vranges[] = {
	BD_RANGE(800000, 10000, 0x00, 0x3C, 0),
	};

	static struct bd71837_vrange ldo1_vranges[] = {
	BD_RANGE(3000000, 100000, 0x00, 0x03, 0),
	BD_RANGE(1600000, 100000, 0x00, 0x03, 0x20),
	};

	static struct bd71837_vrange ldo2_vranges[] = {
	BD_RANGE(900000, 0, 0, 0, 0),
	BD_RANGE(800000, 0, 1, 1, 0),
	};

	static struct bd71837_vrange ldo3_vranges[] = {
	BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
	};

	static struct bd71837_vrange ldo4_vranges[] = {
	BD_RANGE(900000, 100000, 0x00, 0x09, 0),
	};

	static struct bd71837_vrange bd71837_ldo5_vranges[] = {
	BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
	};

	static struct bd71837_vrange bd71847_ldo5_vranges[] = {
	BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
	BD_RANGE(800000, 100000, 0x00, 0x0f, 0x20),
	};

	static struct bd71837_vrange ldo6_vranges[] = {
	BD_RANGE(900000, 100000, 0x00, 0x09, 0),
	};

	static struct bd71837_vrange ldo7_vranges[] = {
	BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
	};

	/*
	* We use enable mask 'HW_STATE_CONTROL' to indicate that this regulator
	* must not be enabled or disabled by SW. The typical use-case for BD71837
	* is powering NXP i.MX8. In this use-case we (for now) only allow control
	* for BUCK3 and BUCK4 which are not boot critical.
	*/
	static struct bd71837_platdata bd71837_reg_data[] = {
	/* Bucks 1-4 which support dynamic voltage scaling */
	BD_DATA("BUCK1", BD718XX_BUCK1_CTRL, HW_STATE_CONTROL,
	BD718XX_BUCK1_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
	true, BD718XX_BUCK_SEL),
	BD_DATA("BUCK2", BD718XX_BUCK2_CTRL, HW_STATE_CONTROL,
	BD718XX_BUCK2_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
	true, BD718XX_BUCK_SEL),
	BD_DATA("BUCK3", BD71837_BUCK3_CTRL, BD718XX_BUCK_EN,
	BD71837_BUCK3_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
	true, BD718XX_BUCK_SEL),
	BD_DATA("BUCK4", BD71837_BUCK4_CTRL, BD718XX_BUCK_EN,
	BD71837_BUCK4_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
	true, BD718XX_BUCK_SEL),
	/* Bucks 5-8 which do not support dynamic voltage scaling */
	BD_DATA("BUCK5", BD718XX_1ST_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
	BD718XX_1ST_NODVS_BUCK_VOLT, BD718XX_1ST_NODVS_BUCK_MASK,
	bd71837_buck5_vranges, 0x80, false, BD718XX_BUCK_SEL),
	BD_DATA("BUCK6", BD718XX_2ND_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
	BD718XX_2ND_NODVS_BUCK_VOLT, BD71837_BUCK6_MASK,
	bd71837_buck6_vranges, 0, false, BD718XX_BUCK_SEL),
	BD_DATA("BUCK7", BD718XX_3RD_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
	BD718XX_3RD_NODVS_BUCK_VOLT, BD718XX_3RD_NODVS_BUCK_MASK,
	nodvs_buck3_vranges, 0, false, BD718XX_BUCK_SEL),
	BD_DATA("BUCK8", BD718XX_4TH_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
	BD718XX_4TH_NODVS_BUCK_VOLT, BD718XX_4TH_NODVS_BUCK_MASK,
	nodvs_buck4_vranges, 0, false, BD718XX_BUCK_SEL),
	/* LDOs */
	BD_DATA("LDO1", BD718XX_LDO1_VOLT, HW_STATE_CONTROL, BD718XX_LDO1_VOLT,
	BD718XX_LDO1_MASK, ldo1_vranges, 0x20, false, BD718XX_LDO_SEL),
	BD_DATA("LDO2", BD718XX_LDO2_VOLT, HW_STATE_CONTROL, BD718XX_LDO2_VOLT,
	BD718XX_LDO2_MASK, ldo2_vranges, 0, false, BD718XX_LDO_SEL),
	BD_DATA("LDO3", BD718XX_LDO3_VOLT, HW_STATE_CONTROL, BD718XX_LDO3_VOLT,
	BD718XX_LDO3_MASK, ldo3_vranges, 0, false, BD718XX_LDO_SEL),
	BD_DATA("LDO4", BD718XX_LDO4_VOLT, HW_STATE_CONTROL, BD718XX_LDO4_VOLT,
	BD718XX_LDO4_MASK, ldo4_vranges, 0, false, BD718XX_LDO_SEL),
	BD_DATA("LDO5", BD718XX_LDO5_VOLT, HW_STATE_CONTROL, BD718XX_LDO5_VOLT,
	BD71837_LDO5_MASK, bd71837_ldo5_vranges, 0, false,
	BD718XX_LDO_SEL),
	BD_DATA("LDO6", BD718XX_LDO6_VOLT, HW_STATE_CONTROL, BD718XX_LDO6_VOLT,
	BD718XX_LDO6_MASK, ldo6_vranges, 0, false, BD718XX_LDO_SEL),
	BD_DATA("LDO7", BD71837_LDO7_VOLT, HW_STATE_CONTROL, BD71837_LDO7_VOLT,
	BD71837_LDO7_MASK, ldo7_vranges, 0, false, BD718XX_LDO_SEL),
	};

	static struct bd71837_platdata bd71847_reg_data[] = {
	/* Bucks 1 and 2 which support dynamic voltage scaling */
	BD_DATA("BUCK1", BD718XX_BUCK1_CTRL, HW_STATE_CONTROL,
	BD718XX_BUCK1_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
	true, BD718XX_BUCK_SEL),
	BD_DATA("BUCK2", BD718XX_BUCK2_CTRL, HW_STATE_CONTROL,
	BD718XX_BUCK2_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
	true, BD718XX_BUCK_SEL),
	/* Bucks 3-6 which do not support dynamic voltage scaling */
	BD_DATA("BUCK3", BD718XX_1ST_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
	BD718XX_1ST_NODVS_BUCK_VOLT, BD718XX_1ST_NODVS_BUCK_MASK,
	bd71847_buck3_vranges, 0xc0, false, BD718XX_BUCK_SEL),
	BD_DATA("BUCK4", BD718XX_2ND_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
	BD718XX_2ND_NODVS_BUCK_VOLT, BD71837_BUCK6_MASK,
	bd71847_buck4_vranges, 0x40, false, BD718XX_BUCK_SEL),
	BD_DATA("BUCK5", BD718XX_3RD_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
	BD718XX_3RD_NODVS_BUCK_VOLT, BD718XX_3RD_NODVS_BUCK_MASK,
	nodvs_buck3_vranges, 0, false, BD718XX_BUCK_SEL),
	BD_DATA("BUCK6", BD718XX_4TH_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
	BD718XX_4TH_NODVS_BUCK_VOLT, BD718XX_4TH_NODVS_BUCK_MASK,
	nodvs_buck4_vranges, 0, false, BD718XX_BUCK_SEL),
	/* LDOs */
	BD_DATA("LDO1", BD718XX_LDO1_VOLT, HW_STATE_CONTROL, BD718XX_LDO1_VOLT,
	BD718XX_LDO1_MASK, ldo1_vranges, 0x20, false, BD718XX_LDO_SEL),
	BD_DATA("LDO2", BD718XX_LDO2_VOLT, HW_STATE_CONTROL, BD718XX_LDO2_VOLT,
	BD718XX_LDO2_MASK, ldo2_vranges, 0, false, BD718XX_LDO_SEL),
	BD_DATA("LDO3", BD718XX_LDO3_VOLT, HW_STATE_CONTROL, BD718XX_LDO3_VOLT,
	BD718XX_LDO3_MASK, ldo3_vranges, 0, false, BD718XX_LDO_SEL),
	BD_DATA("LDO4", BD718XX_LDO4_VOLT, HW_STATE_CONTROL, BD718XX_LDO4_VOLT,
	BD718XX_LDO4_MASK, ldo4_vranges, 0, false, BD718XX_LDO_SEL),
	BD_DATA("LDO5", BD718XX_LDO5_VOLT, HW_STATE_CONTROL, BD718XX_LDO5_VOLT,
	BD71847_LDO5_MASK, bd71847_ldo5_vranges, 0x20, false,
	BD718XX_LDO_SEL),
	BD_DATA("LDO6", BD718XX_LDO6_VOLT, HW_STATE_CONTROL, BD718XX_LDO6_VOLT,
	BD718XX_LDO6_MASK, ldo6_vranges, 0, false, BD718XX_LDO_SEL),
	};

	static int vrange_find_value(struct bd71837_vrange *r, unsigned int sel,
	unsigned int *val)
	{
	if (!val \|\| sel < r->min_sel \|\| sel > r->max_sel)
	return -EINVAL;

	val = r->min_volt + r->step (sel - r->min_sel);
	return 0;
	}

	static int vrange_find_selector(struct bd71837_vrange *r, int val,
	unsigned int *sel)
	{
	int ret = -EINVAL;
	int num_vals = r->max_sel - r->min_sel + 1;

	if (val >= r->min_volt &&
	val <= r->min_volt + r->step * (num_vals - 1)) {
	if (r->step) {
	*sel = r->min_sel + ((val - r->min_volt) / r->step);
	ret = 0;
	} else {
	*sel = r->min_sel;
	ret = 0;
	}
	}
	return ret;
	}

	static int bd71837_get_enable(struct udevice *dev)
	{
	int val;
	struct bd71837_platdata *plat = dev_get_plat(dev);

	/*
	* boot critical regulators on bd71837 must not be controlled by sw
	* due to the 'feature' which leaves power rails down if bd71837 is
	* reseted to snvs state. hence we can't get the state here.
	*
	* if we are alive it means we probably are on run state and
	* if the regulator can't be controlled we can assume it is
	* enabled.
	*/
	if (plat->enablemask == HW_STATE_CONTROL)
	return 1;

	val = pmic_reg_read(dev->parent, plat->enable_reg);
	if (val < 0)
	return val;

	return (val & plat->enablemask);
	}

	static int bd71837_set_enable(struct udevice *dev, bool enable)
	{
	int val = 0;
	struct bd71837_platdata *plat = dev_get_plat(dev);

	/*
	* boot critical regulators on bd71837 must not be controlled by sw
	* due to the 'feature' which leaves power rails down if bd71837 is
	* reseted to snvs state. Hence we can't set the state here.
	*/
	if (plat->enablemask == HW_STATE_CONTROL)
	return -EINVAL;

	if (enable)
	val = plat->enablemask;

	return pmic_clrsetbits(dev->parent, plat->enable_reg, plat->enablemask,
	val);
	}

	static int bd71837_set_value(struct udevice *dev, int uvolt)
	{
	unsigned int sel;
	unsigned int range;
	int i;
	int found = 0;
	struct bd71837_platdata *plat = dev_get_plat(dev);

	/*
	* An under/overshooting may occur if voltage is changed for other
	* regulators but buck 1,2,3 or 4 when regulator is enabled. Prevent
	* change to protect the HW
	*/
	if (!plat->dvs)
	if (bd71837_get_enable(dev)) {
	pr_err("Only DVS bucks can be changed when enabled\n");
	return -EINVAL;
	}

	for (i = 0; i < plat->numranges; i++) {
	struct bd71837_vrange *r = &plat->ranges[i];

	found = !vrange_find_selector(r, uvolt, &sel);
	if (found) {
	unsigned int tmp;

	/*
	* We require exactly the requested value to be
	* supported - this can be changed later if needed
	*/
	range = r->rangeval;
	found = !vrange_find_value(r, sel, &tmp);
	if (found && tmp == uvolt)
	break;
	found = 0;
	}
	}

	if (!found)
	return -EINVAL;

	sel <<= ffs(plat->volt_mask) - 1;

	if (plat->rangemask)
	sel \|= range;

	return pmic_clrsetbits(dev->parent, plat->volt_reg, plat->volt_mask \|
	plat->rangemask, sel);
	}

	static int bd71837_get_value(struct udevice *dev)
	{
	unsigned int reg, range;
	unsigned int tmp;
	struct bd71837_platdata *plat = dev_get_plat(dev);
	int i;

	reg = pmic_reg_read(dev->parent, plat->volt_reg);
	if (((int)reg) < 0)
	return reg;

	range = reg & plat->rangemask;

	reg &= plat->volt_mask;
	reg >>= ffs(plat->volt_mask) - 1;

	for (i = 0; i < plat->numranges; i++) {
	struct bd71837_vrange *r = &plat->ranges[i];

	if (plat->rangemask && ((plat->rangemask & range) !=
	r->rangeval))
	continue;

	if (!vrange_find_value(r, reg, &tmp))
	return tmp;
	}

	pr_err("Unknown voltage value read from pmic\n");

	return -EINVAL;
	}

	static int bd71837_regulator_probe(struct udevice *dev)
	{
	struct bd71837_platdata *plat = dev_get_plat(dev);
	int i, ret;
	struct dm_regulator_uclass_plat *uc_pdata;
	int type;
	struct bd71837_platdata *init_data;
	int data_amnt;

	type = dev_get_driver_data(dev_get_parent(dev));

	switch (type) {
	case ROHM_CHIP_TYPE_BD71837:
	init_data = bd71837_reg_data;
	data_amnt = ARRAY_SIZE(bd71837_reg_data);
	break;
	case ROHM_CHIP_TYPE_BD71847:
	init_data = bd71847_reg_data;
	data_amnt = ARRAY_SIZE(bd71847_reg_data);
	break;
	default:
	debug("Unknown PMIC type\n");
	init_data = NULL;
	data_amnt = 0;
	break;
	}

	for (i = 0; i < data_amnt; i++) {
	if (!strcmp(dev->name, init_data[i].name)) {
	*plat = init_data[i];
	if (plat->enablemask != HW_STATE_CONTROL) {
	/*
	* Take the regulator under SW control. Ensure
	* the initial state matches dt flags and then
	* write the SEL bit
	*/
	uc_pdata = dev_get_uclass_plat(dev);
	ret = bd71837_set_enable(dev,
	!!(uc_pdata->boot_on \|\|
	uc_pdata->always_on));
	if (ret)
	return ret;

	return pmic_clrsetbits(dev->parent,
	plat->enable_reg,
	plat->sel_mask,
	plat->sel_mask);
	}
	return 0;
	}
	}

	pr_err("Unknown regulator '%s'\n", dev->name);

	return -ENOENT;
	}

	static const struct dm_regulator_ops bd71837_regulator_ops = {
	.get_value = bd71837_get_value,
	.set_value = bd71837_set_value,
	.get_enable = bd71837_get_enable,
	.set_enable = bd71837_set_enable,
	};

	U_BOOT_DRIVER(bd71837_regulator) = {
	.name = BD718XX_REGULATOR_DRIVER,
	.id = UCLASS_REGULATOR,
	.ops = &bd71837_regulator_ops,
	.probe = bd71837_regulator_probe,
	.plat_auto = sizeof(struct bd71837_platdata),
	};