| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2019 NXP |
| */ |
| |
| #include <common.h> |
| #include <cpu.h> |
| #include <dm.h> |
| #include <thermal.h> |
| #include <asm/system.h> |
| #include <asm/arch/sci/sci.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch-imx/cpu.h> |
| #include <asm/armv8/cpu.h> |
| #include <linux/bitops.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct cpu_imx_plat { |
| const char *name; |
| const char *rev; |
| const char *type; |
| u32 cpu_rsrc; |
| u32 cpurev; |
| u32 freq_mhz; |
| u32 mpidr; |
| }; |
| |
| const char *get_imx8_type(u32 imxtype) |
| { |
| switch (imxtype) { |
| case MXC_CPU_IMX8QXP: |
| case MXC_CPU_IMX8QXP_A0: |
| return "QXP"; |
| case MXC_CPU_IMX8QM: |
| return "QM"; |
| default: |
| return "??"; |
| } |
| } |
| |
| const char *get_imx8_rev(u32 rev) |
| { |
| switch (rev) { |
| case CHIP_REV_A: |
| return "A"; |
| case CHIP_REV_B: |
| return "B"; |
| case CHIP_REV_C: |
| return "C"; |
| default: |
| return "?"; |
| } |
| } |
| |
| static void set_core_data(struct udevice *dev) |
| { |
| struct cpu_imx_plat *plat = dev_get_plat(dev); |
| |
| if (device_is_compatible(dev, "arm,cortex-a35")) { |
| plat->cpu_rsrc = SC_R_A35; |
| plat->name = "A35"; |
| } else if (device_is_compatible(dev, "arm,cortex-a53")) { |
| plat->cpu_rsrc = SC_R_A53; |
| plat->name = "A53"; |
| } else if (device_is_compatible(dev, "arm,cortex-a72")) { |
| plat->cpu_rsrc = SC_R_A72; |
| plat->name = "A72"; |
| } else { |
| plat->cpu_rsrc = SC_R_A53; |
| plat->name = "?"; |
| } |
| } |
| |
| #if IS_ENABLED(CONFIG_IMX_SCU_THERMAL) |
| static int cpu_imx_get_temp(struct cpu_imx_plat *plat) |
| { |
| struct udevice *thermal_dev; |
| int cpu_tmp, ret; |
| int idx = 1; /* use "cpu-thermal0" device */ |
| |
| if (plat->cpu_rsrc == SC_R_A72) |
| idx = 2; /* use "cpu-thermal1" device */ |
| |
| ret = uclass_get_device(UCLASS_THERMAL, idx, &thermal_dev); |
| if (!ret) { |
| ret = thermal_get_temp(thermal_dev, &cpu_tmp); |
| if (ret) |
| return 0xdeadbeef; |
| } else { |
| return 0xdeadbeef; |
| } |
| |
| return cpu_tmp; |
| } |
| #else |
| static int cpu_imx_get_temp(struct cpu_imx_plat *plat) |
| { |
| return 0; |
| } |
| #endif |
| |
| int cpu_imx_get_desc(const struct udevice *dev, char *buf, int size) |
| { |
| struct cpu_imx_plat *plat = dev_get_plat(dev); |
| int ret, temp; |
| |
| if (size < 100) |
| return -ENOSPC; |
| |
| ret = snprintf(buf, size, "NXP i.MX8%s Rev%s %s at %u MHz", |
| plat->type, plat->rev, plat->name, plat->freq_mhz); |
| |
| if (IS_ENABLED(CONFIG_IMX_SCU_THERMAL)) { |
| temp = cpu_imx_get_temp(plat); |
| buf = buf + ret; |
| size = size - ret; |
| if (temp != 0xdeadbeef) |
| ret = snprintf(buf, size, " at %dC", temp); |
| else |
| ret = snprintf(buf, size, " - invalid sensor data"); |
| } |
| |
| snprintf(buf + ret, size - ret, "\n"); |
| |
| return 0; |
| } |
| |
| static int cpu_imx_get_info(const struct udevice *dev, struct cpu_info *info) |
| { |
| struct cpu_imx_plat *plat = dev_get_plat(dev); |
| |
| info->cpu_freq = plat->freq_mhz * 1000; |
| info->features = BIT(CPU_FEAT_L1_CACHE) | BIT(CPU_FEAT_MMU); |
| return 0; |
| } |
| |
| static int cpu_imx_get_count(const struct udevice *dev) |
| { |
| ofnode node; |
| int num = 0; |
| |
| ofnode_for_each_subnode(node, dev_ofnode(dev->parent)) { |
| const char *device_type; |
| |
| if (!ofnode_is_available(node)) |
| continue; |
| |
| device_type = ofnode_read_string(node, "device_type"); |
| if (!device_type) |
| continue; |
| |
| if (!strcmp(device_type, "cpu")) |
| num++; |
| } |
| |
| return num; |
| } |
| |
| static int cpu_imx_get_vendor(const struct udevice *dev, char *buf, int size) |
| { |
| snprintf(buf, size, "NXP"); |
| return 0; |
| } |
| |
| static int cpu_imx_is_current(struct udevice *dev) |
| { |
| struct cpu_imx_plat *plat = dev_get_plat(dev); |
| |
| if (plat->mpidr == (read_mpidr() & 0xffff)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static const struct cpu_ops cpu_imx8_ops = { |
| .get_desc = cpu_imx_get_desc, |
| .get_info = cpu_imx_get_info, |
| .get_count = cpu_imx_get_count, |
| .get_vendor = cpu_imx_get_vendor, |
| .is_current = cpu_imx_is_current, |
| }; |
| |
| static const struct udevice_id cpu_imx8_ids[] = { |
| { .compatible = "arm,cortex-a35" }, |
| { .compatible = "arm,cortex-a53" }, |
| { .compatible = "arm,cortex-a72" }, |
| { } |
| }; |
| |
| static ulong imx8_get_cpu_rate(struct udevice *dev) |
| { |
| struct cpu_imx_plat *plat = dev_get_plat(dev); |
| ulong rate; |
| int ret; |
| |
| ret = sc_pm_get_clock_rate(-1, plat->cpu_rsrc, SC_PM_CLK_CPU, |
| (sc_pm_clock_rate_t *)&rate); |
| if (ret) { |
| printf("Could not read CPU frequency: %d\n", ret); |
| return 0; |
| } |
| |
| return rate; |
| } |
| |
| static int imx8_cpu_probe(struct udevice *dev) |
| { |
| struct cpu_imx_plat *plat = dev_get_plat(dev); |
| u32 cpurev; |
| |
| set_core_data(dev); |
| cpurev = get_cpu_rev(); |
| plat->cpurev = cpurev; |
| plat->rev = get_imx8_rev(cpurev & 0xFFF); |
| plat->type = get_imx8_type((cpurev & 0xFF000) >> 12); |
| plat->freq_mhz = imx8_get_cpu_rate(dev) / 1000000; |
| plat->mpidr = dev_read_addr(dev); |
| if (plat->mpidr == FDT_ADDR_T_NONE) { |
| printf("%s: Failed to get CPU reg property\n", __func__); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(cpu_imx8_drv) = { |
| .name = "imx8x_cpu", |
| .id = UCLASS_CPU, |
| .of_match = cpu_imx8_ids, |
| .ops = &cpu_imx8_ops, |
| .probe = imx8_cpu_probe, |
| .plat_auto = sizeof(struct cpu_imx_plat), |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |