| /* |
| * Renesas RCar Gen3 CPG MSSR driver |
| * |
| * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * Based on the following driver from Linux kernel: |
| * r8a7796 Clock Pulse Generator / Module Standby and Software Reset |
| * |
| * Copyright (C) 2016 Glider bvba |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <wait_bit.h> |
| #include <asm/io.h> |
| |
| #include <dt-bindings/clock/renesas-cpg-mssr.h> |
| |
| #include "renesas-cpg-mssr.h" |
| #include "rcar-gen3-cpg.h" |
| |
| #define CPG_RST_MODEMR 0x0060 |
| |
| #define CPG_PLL0CR 0x00d8 |
| #define CPG_PLL2CR 0x002c |
| #define CPG_PLL4CR 0x01f4 |
| |
| #define CPG_RPC_PREDIV_MASK 0x3 |
| #define CPG_RPC_PREDIV_OFFSET 3 |
| #define CPG_RPC_POSTDIV_MASK 0x7 |
| #define CPG_RPC_POSTDIV_OFFSET 0 |
| |
| /* |
| * SDn Clock |
| */ |
| #define CPG_SD_STP_HCK BIT(9) |
| #define CPG_SD_STP_CK BIT(8) |
| |
| #define CPG_SD_STP_MASK (CPG_SD_STP_HCK | CPG_SD_STP_CK) |
| #define CPG_SD_FC_MASK (0x7 << 2 | 0x3 << 0) |
| |
| #define CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) \ |
| { \ |
| .val = ((stp_hck) ? CPG_SD_STP_HCK : 0) | \ |
| ((stp_ck) ? CPG_SD_STP_CK : 0) | \ |
| ((sd_srcfc) << 2) | \ |
| ((sd_fc) << 0), \ |
| .div = (sd_div), \ |
| } |
| |
| struct sd_div_table { |
| u32 val; |
| unsigned int div; |
| }; |
| |
| /* SDn divider |
| * sd_srcfc sd_fc div |
| * stp_hck stp_ck (div) (div) = sd_srcfc x sd_fc |
| *------------------------------------------------------------------- |
| * 0 0 0 (1) 1 (4) 4 |
| * 0 0 1 (2) 1 (4) 8 |
| * 1 0 2 (4) 1 (4) 16 |
| * 1 0 3 (8) 1 (4) 32 |
| * 1 0 4 (16) 1 (4) 64 |
| * 0 0 0 (1) 0 (2) 2 |
| * 0 0 1 (2) 0 (2) 4 |
| * 1 0 2 (4) 0 (2) 8 |
| * 1 0 3 (8) 0 (2) 16 |
| * 1 0 4 (16) 0 (2) 32 |
| */ |
| static const struct sd_div_table cpg_sd_div_table[] = { |
| /* CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) */ |
| CPG_SD_DIV_TABLE_DATA(0, 0, 0, 1, 4), |
| CPG_SD_DIV_TABLE_DATA(0, 0, 1, 1, 8), |
| CPG_SD_DIV_TABLE_DATA(1, 0, 2, 1, 16), |
| CPG_SD_DIV_TABLE_DATA(1, 0, 3, 1, 32), |
| CPG_SD_DIV_TABLE_DATA(1, 0, 4, 1, 64), |
| CPG_SD_DIV_TABLE_DATA(0, 0, 0, 0, 2), |
| CPG_SD_DIV_TABLE_DATA(0, 0, 1, 0, 4), |
| CPG_SD_DIV_TABLE_DATA(1, 0, 2, 0, 8), |
| CPG_SD_DIV_TABLE_DATA(1, 0, 3, 0, 16), |
| CPG_SD_DIV_TABLE_DATA(1, 0, 4, 0, 32), |
| }; |
| |
| static int gen3_clk_setup_sdif_div(struct clk *clk) |
| { |
| struct gen3_clk_priv *priv = dev_get_priv(clk->dev); |
| struct cpg_mssr_info *info = priv->info; |
| const struct cpg_core_clk *core; |
| struct clk parent; |
| int ret; |
| |
| ret = renesas_clk_get_parent(clk, info, &parent); |
| if (ret) { |
| printf("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret); |
| return ret; |
| } |
| |
| if (renesas_clk_is_mod(&parent)) |
| return 0; |
| |
| ret = renesas_clk_get_core(&parent, info, &core); |
| if (ret) |
| return ret; |
| |
| if (core->type != CLK_TYPE_GEN3_SD) |
| return 0; |
| |
| debug("%s[%i] SDIF offset=%x\n", __func__, __LINE__, core->offset); |
| |
| writel(1, priv->base + core->offset); |
| |
| return 0; |
| } |
| |
| static int gen3_clk_enable(struct clk *clk) |
| { |
| struct gen3_clk_priv *priv = dev_get_priv(clk->dev); |
| int ret = gen3_clk_setup_sdif_div(clk); |
| |
| if (ret) |
| return ret; |
| |
| return renesas_clk_endisable(clk, priv->base, true); |
| } |
| |
| static int gen3_clk_disable(struct clk *clk) |
| { |
| struct gen3_clk_priv *priv = dev_get_priv(clk->dev); |
| |
| return renesas_clk_endisable(clk, priv->base, false); |
| } |
| |
| static ulong gen3_clk_get_rate(struct clk *clk) |
| { |
| struct gen3_clk_priv *priv = dev_get_priv(clk->dev); |
| struct cpg_mssr_info *info = priv->info; |
| struct clk parent; |
| const struct cpg_core_clk *core; |
| const struct rcar_gen3_cpg_pll_config *pll_config = |
| priv->cpg_pll_config; |
| u32 value, mult, prediv, postdiv, rate = 0; |
| int i, ret; |
| |
| debug("%s[%i] Clock: id=%lu\n", __func__, __LINE__, clk->id); |
| |
| ret = renesas_clk_get_parent(clk, info, &parent); |
| if (ret) { |
| printf("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret); |
| return ret; |
| } |
| |
| if (renesas_clk_is_mod(clk)) { |
| rate = gen3_clk_get_rate(&parent); |
| debug("%s[%i] MOD clk: parent=%lu => rate=%u\n", |
| __func__, __LINE__, parent.id, rate); |
| return rate; |
| } |
| |
| ret = renesas_clk_get_core(clk, info, &core); |
| if (ret) |
| return ret; |
| |
| switch (core->type) { |
| case CLK_TYPE_IN: |
| if (core->id == info->clk_extal_id) { |
| rate = clk_get_rate(&priv->clk_extal); |
| debug("%s[%i] EXTAL clk: rate=%u\n", |
| __func__, __LINE__, rate); |
| return rate; |
| } |
| |
| if (core->id == info->clk_extalr_id) { |
| rate = clk_get_rate(&priv->clk_extalr); |
| debug("%s[%i] EXTALR clk: rate=%u\n", |
| __func__, __LINE__, rate); |
| return rate; |
| } |
| |
| return -EINVAL; |
| |
| case CLK_TYPE_GEN3_MAIN: |
| rate = gen3_clk_get_rate(&parent) / pll_config->extal_div; |
| debug("%s[%i] MAIN clk: parent=%i extal_div=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, pll_config->extal_div, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN3_PLL0: |
| value = readl(priv->base + CPG_PLL0CR); |
| mult = (((value >> 24) & 0x7f) + 1) * 2; |
| rate = gen3_clk_get_rate(&parent) * mult; |
| debug("%s[%i] PLL0 clk: parent=%i mult=%u => rate=%u\n", |
| __func__, __LINE__, core->parent, mult, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN3_PLL1: |
| rate = gen3_clk_get_rate(&parent) * pll_config->pll1_mult; |
| debug("%s[%i] PLL1 clk: parent=%i mul=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, pll_config->pll1_mult, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN3_PLL2: |
| value = readl(priv->base + CPG_PLL2CR); |
| mult = (((value >> 24) & 0x7f) + 1) * 2; |
| rate = gen3_clk_get_rate(&parent) * mult; |
| debug("%s[%i] PLL2 clk: parent=%i mult=%u => rate=%u\n", |
| __func__, __LINE__, core->parent, mult, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN3_PLL3: |
| rate = gen3_clk_get_rate(&parent) * pll_config->pll3_mult; |
| debug("%s[%i] PLL3 clk: parent=%i mul=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, pll_config->pll3_mult, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN3_PLL4: |
| value = readl(priv->base + CPG_PLL4CR); |
| mult = (((value >> 24) & 0x7f) + 1) * 2; |
| rate = gen3_clk_get_rate(&parent) * mult; |
| debug("%s[%i] PLL4 clk: parent=%i mult=%u => rate=%u\n", |
| __func__, __LINE__, core->parent, mult, rate); |
| return rate; |
| |
| case CLK_TYPE_FF: |
| case CLK_TYPE_GEN3_PE: /* FIXME */ |
| rate = (gen3_clk_get_rate(&parent) * core->mult) / core->div; |
| debug("%s[%i] FIXED clk: parent=%i div=%i mul=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, core->mult, core->div, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN3_SD: /* FIXME */ |
| value = readl(priv->base + core->offset); |
| value &= CPG_SD_STP_MASK | CPG_SD_FC_MASK; |
| |
| for (i = 0; i < ARRAY_SIZE(cpg_sd_div_table); i++) { |
| if (cpg_sd_div_table[i].val != value) |
| continue; |
| |
| rate = gen3_clk_get_rate(&parent) / |
| cpg_sd_div_table[i].div; |
| debug("%s[%i] SD clk: parent=%i div=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, cpg_sd_div_table[i].div, rate); |
| |
| return rate; |
| } |
| |
| return -EINVAL; |
| |
| case CLK_TYPE_GEN3_RPC: |
| rate = gen3_clk_get_rate(&parent); |
| |
| value = readl(priv->base + core->offset); |
| |
| prediv = (value >> CPG_RPC_PREDIV_OFFSET) & |
| CPG_RPC_PREDIV_MASK; |
| if (prediv == 2) |
| rate /= 5; |
| else if (prediv == 3) |
| rate /= 6; |
| else |
| return -EINVAL; |
| |
| postdiv = (value >> CPG_RPC_POSTDIV_OFFSET) & |
| CPG_RPC_POSTDIV_MASK; |
| rate /= postdiv + 1; |
| |
| debug("%s[%i] RPC clk: parent=%i prediv=%i postdiv=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, prediv, postdiv, rate); |
| |
| return -EINVAL; |
| |
| } |
| |
| printf("%s[%i] unknown fail\n", __func__, __LINE__); |
| |
| return -ENOENT; |
| } |
| |
| static ulong gen3_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| return gen3_clk_get_rate(clk); |
| } |
| |
| static int gen3_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args) |
| { |
| if (args->args_count != 2) { |
| debug("Invaild args_count: %d\n", args->args_count); |
| return -EINVAL; |
| } |
| |
| clk->id = (args->args[0] << 16) | args->args[1]; |
| |
| return 0; |
| } |
| |
| const struct clk_ops gen3_clk_ops = { |
| .enable = gen3_clk_enable, |
| .disable = gen3_clk_disable, |
| .get_rate = gen3_clk_get_rate, |
| .set_rate = gen3_clk_set_rate, |
| .of_xlate = gen3_clk_of_xlate, |
| }; |
| |
| int gen3_clk_probe(struct udevice *dev) |
| { |
| struct gen3_clk_priv *priv = dev_get_priv(dev); |
| struct cpg_mssr_info *info = |
| (struct cpg_mssr_info *)dev_get_driver_data(dev); |
| fdt_addr_t rst_base; |
| u32 cpg_mode; |
| int ret; |
| |
| priv->base = (struct gen3_base *)devfdt_get_addr(dev); |
| if (!priv->base) |
| return -EINVAL; |
| |
| priv->info = info; |
| ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1, info->reset_node); |
| if (ret < 0) |
| return ret; |
| |
| rst_base = fdtdec_get_addr(gd->fdt_blob, ret, "reg"); |
| if (rst_base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| cpg_mode = readl(rst_base + CPG_RST_MODEMR); |
| |
| priv->cpg_pll_config = |
| (struct rcar_gen3_cpg_pll_config *)info->get_pll_config(cpg_mode); |
| if (!priv->cpg_pll_config->extal_div) |
| return -EINVAL; |
| |
| ret = clk_get_by_name(dev, "extal", &priv->clk_extal); |
| if (ret < 0) |
| return ret; |
| |
| if (info->extalr_node) { |
| ret = clk_get_by_name(dev, info->extalr_node, &priv->clk_extalr); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int gen3_clk_remove(struct udevice *dev) |
| { |
| struct gen3_clk_priv *priv = dev_get_priv(dev); |
| |
| return renesas_clk_remove(priv->base, priv->info); |
| } |