blob: eb15f6243f2046ece233ea49a5c854e7c6848f71 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* TI gate clock support
*
* Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
*
* Loosely based on Linux kernel drivers/clk/ti/gate.c
*/
#include <common.h>
#include <dm.h>
#include <dm/device_compat.h>
#include <clk-uclass.h>
#include <asm/io.h>
#include <linux/clk-provider.h>
#include "clk.h"
struct clk_ti_gate_priv {
struct clk_ti_reg reg;
u8 enable_bit;
u32 flags;
bool invert_enable;
};
static int clk_ti_gate_disable(struct clk *clk)
{
struct clk_ti_gate_priv *priv = dev_get_priv(clk->dev);
u32 v;
v = clk_ti_readl(&priv->reg);
if (priv->invert_enable)
v |= (1 << priv->enable_bit);
else
v &= ~(1 << priv->enable_bit);
clk_ti_writel(v, &priv->reg);
/* No OCP barrier needed here since it is a disable operation */
return 0;
}
static int clk_ti_gate_enable(struct clk *clk)
{
struct clk_ti_gate_priv *priv = dev_get_priv(clk->dev);
u32 v;
v = clk_ti_readl(&priv->reg);
if (priv->invert_enable)
v &= ~(1 << priv->enable_bit);
else
v |= (1 << priv->enable_bit);
clk_ti_writel(v, &priv->reg);
/* OCP barrier */
v = clk_ti_readl(&priv->reg);
return 0;
}
static int clk_ti_gate_of_to_plat(struct udevice *dev)
{
struct clk_ti_gate_priv *priv = dev_get_priv(dev);
int err;
err = clk_ti_get_reg_addr(dev, 0, &priv->reg);
if (err) {
dev_err(dev, "failed to get control register address\n");
return err;
}
priv->enable_bit = dev_read_u32_default(dev, "ti,bit-shift", 0);
if (dev_read_bool(dev, "ti,set-rate-parent"))
priv->flags |= CLK_SET_RATE_PARENT;
priv->invert_enable = dev_read_bool(dev, "ti,set-bit-to-disable");
return 0;
}
static struct clk_ops clk_ti_gate_ops = {
.enable = clk_ti_gate_enable,
.disable = clk_ti_gate_disable,
};
static const struct udevice_id clk_ti_gate_of_match[] = {
{ .compatible = "ti,gate-clock" },
{ },
};
U_BOOT_DRIVER(clk_ti_gate) = {
.name = "ti_gate_clock",
.id = UCLASS_CLK,
.of_match = clk_ti_gate_of_match,
.of_to_plat = clk_ti_gate_of_to_plat,
.priv_auto = sizeof(struct clk_ti_gate_priv),
.ops = &clk_ti_gate_ops,
};