| /* |
| * (C) Copyright 2016 |
| * |
| * Michael Kurz, <michi.kurz@gmail.com> |
| * |
| * STM32 QSPI driver |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <spi.h> |
| #include <spi_flash.h> |
| #include <asm/io.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <asm/arch/stm32.h> |
| #include <asm/arch/stm32_defs.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct stm32_qspi_regs { |
| u32 cr; /* 0x00 */ |
| u32 dcr; /* 0x04 */ |
| u32 sr; /* 0x08 */ |
| u32 fcr; /* 0x0C */ |
| u32 dlr; /* 0x10 */ |
| u32 ccr; /* 0x14 */ |
| u32 ar; /* 0x18 */ |
| u32 abr; /* 0x1C */ |
| u32 dr; /* 0x20 */ |
| u32 psmkr; /* 0x24 */ |
| u32 psmar; /* 0x28 */ |
| u32 pir; /* 0x2C */ |
| u32 lptr; /* 0x30 */ |
| }; |
| |
| /* |
| * QUADSPI control register |
| */ |
| #define STM32_QSPI_CR_EN BIT(0) |
| #define STM32_QSPI_CR_ABORT BIT(1) |
| #define STM32_QSPI_CR_DMAEN BIT(2) |
| #define STM32_QSPI_CR_TCEN BIT(3) |
| #define STM32_QSPI_CR_SSHIFT BIT(4) |
| #define STM32_QSPI_CR_DFM BIT(6) |
| #define STM32_QSPI_CR_FSEL BIT(7) |
| #define STM32_QSPI_CR_FTHRES_MASK GENMASK(4, 0) |
| #define STM32_QSPI_CR_FTHRES_SHIFT (8) |
| #define STM32_QSPI_CR_TEIE BIT(16) |
| #define STM32_QSPI_CR_TCIE BIT(17) |
| #define STM32_QSPI_CR_FTIE BIT(18) |
| #define STM32_QSPI_CR_SMIE BIT(19) |
| #define STM32_QSPI_CR_TOIE BIT(20) |
| #define STM32_QSPI_CR_APMS BIT(22) |
| #define STM32_QSPI_CR_PMM BIT(23) |
| #define STM32_QSPI_CR_PRESCALER_MASK GENMASK(7, 0) |
| #define STM32_QSPI_CR_PRESCALER_SHIFT (24) |
| |
| /* |
| * QUADSPI device configuration register |
| */ |
| #define STM32_QSPI_DCR_CKMODE BIT(0) |
| #define STM32_QSPI_DCR_CSHT_MASK GENMASK(2, 0) |
| #define STM32_QSPI_DCR_CSHT_SHIFT (8) |
| #define STM32_QSPI_DCR_FSIZE_MASK GENMASK(4, 0) |
| #define STM32_QSPI_DCR_FSIZE_SHIFT (16) |
| |
| /* |
| * QUADSPI status register |
| */ |
| #define STM32_QSPI_SR_TEF BIT(0) |
| #define STM32_QSPI_SR_TCF BIT(1) |
| #define STM32_QSPI_SR_FTF BIT(2) |
| #define STM32_QSPI_SR_SMF BIT(3) |
| #define STM32_QSPI_SR_TOF BIT(4) |
| #define STM32_QSPI_SR_BUSY BIT(5) |
| #define STM32_QSPI_SR_FLEVEL_MASK GENMASK(5, 0) |
| #define STM32_QSPI_SR_FLEVEL_SHIFT (8) |
| |
| /* |
| * QUADSPI flag clear register |
| */ |
| #define STM32_QSPI_FCR_CTEF BIT(0) |
| #define STM32_QSPI_FCR_CTCF BIT(1) |
| #define STM32_QSPI_FCR_CSMF BIT(3) |
| #define STM32_QSPI_FCR_CTOF BIT(4) |
| |
| /* |
| * QUADSPI communication configuration register |
| */ |
| #define STM32_QSPI_CCR_DDRM BIT(31) |
| #define STM32_QSPI_CCR_DHHC BIT(30) |
| #define STM32_QSPI_CCR_SIOO BIT(28) |
| #define STM32_QSPI_CCR_FMODE_SHIFT (26) |
| #define STM32_QSPI_CCR_DMODE_SHIFT (24) |
| #define STM32_QSPI_CCR_DCYC_SHIFT (18) |
| #define STM32_QSPI_CCR_DCYC_MASK GENMASK(4, 0) |
| #define STM32_QSPI_CCR_ABSIZE_SHIFT (16) |
| #define STM32_QSPI_CCR_ABMODE_SHIFT (14) |
| #define STM32_QSPI_CCR_ADSIZE_SHIFT (12) |
| #define STM32_QSPI_CCR_ADMODE_SHIFT (10) |
| #define STM32_QSPI_CCR_IMODE_SHIFT (8) |
| #define STM32_QSPI_CCR_INSTRUCTION_MASK GENMASK(7, 0) |
| |
| enum STM32_QSPI_CCR_IMODE { |
| STM32_QSPI_CCR_IMODE_NONE = 0, |
| STM32_QSPI_CCR_IMODE_ONE_LINE = 1, |
| STM32_QSPI_CCR_IMODE_TWO_LINE = 2, |
| STM32_QSPI_CCR_IMODE_FOUR_LINE = 3, |
| }; |
| |
| enum STM32_QSPI_CCR_ADMODE { |
| STM32_QSPI_CCR_ADMODE_NONE = 0, |
| STM32_QSPI_CCR_ADMODE_ONE_LINE = 1, |
| STM32_QSPI_CCR_ADMODE_TWO_LINE = 2, |
| STM32_QSPI_CCR_ADMODE_FOUR_LINE = 3, |
| }; |
| |
| enum STM32_QSPI_CCR_ADSIZE { |
| STM32_QSPI_CCR_ADSIZE_8BIT = 0, |
| STM32_QSPI_CCR_ADSIZE_16BIT = 1, |
| STM32_QSPI_CCR_ADSIZE_24BIT = 2, |
| STM32_QSPI_CCR_ADSIZE_32BIT = 3, |
| }; |
| |
| enum STM32_QSPI_CCR_ABMODE { |
| STM32_QSPI_CCR_ABMODE_NONE = 0, |
| STM32_QSPI_CCR_ABMODE_ONE_LINE = 1, |
| STM32_QSPI_CCR_ABMODE_TWO_LINE = 2, |
| STM32_QSPI_CCR_ABMODE_FOUR_LINE = 3, |
| }; |
| |
| enum STM32_QSPI_CCR_ABSIZE { |
| STM32_QSPI_CCR_ABSIZE_8BIT = 0, |
| STM32_QSPI_CCR_ABSIZE_16BIT = 1, |
| STM32_QSPI_CCR_ABSIZE_24BIT = 2, |
| STM32_QSPI_CCR_ABSIZE_32BIT = 3, |
| }; |
| |
| enum STM32_QSPI_CCR_DMODE { |
| STM32_QSPI_CCR_DMODE_NONE = 0, |
| STM32_QSPI_CCR_DMODE_ONE_LINE = 1, |
| STM32_QSPI_CCR_DMODE_TWO_LINE = 2, |
| STM32_QSPI_CCR_DMODE_FOUR_LINE = 3, |
| }; |
| |
| enum STM32_QSPI_CCR_FMODE { |
| STM32_QSPI_CCR_IND_WRITE = 0, |
| STM32_QSPI_CCR_IND_READ = 1, |
| STM32_QSPI_CCR_AUTO_POLL = 2, |
| STM32_QSPI_CCR_MEM_MAP = 3, |
| }; |
| |
| /* default SCK frequency, unit: HZ */ |
| #define STM32_QSPI_DEFAULT_SCK_FREQ 108000000 |
| |
| struct stm32_qspi_platdata { |
| u32 base; |
| u32 memory_map; |
| u32 max_hz; |
| }; |
| |
| struct stm32_qspi_priv { |
| struct stm32_qspi_regs *regs; |
| u32 max_hz; |
| u32 mode; |
| |
| u32 command; |
| u32 address; |
| u32 dummycycles; |
| #define CMD_HAS_ADR BIT(24) |
| #define CMD_HAS_DUMMY BIT(25) |
| #define CMD_HAS_DATA BIT(26) |
| }; |
| |
| static void _stm32_qspi_disable(struct stm32_qspi_priv *priv) |
| { |
| clrbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN); |
| } |
| |
| static void _stm32_qspi_enable(struct stm32_qspi_priv *priv) |
| { |
| setbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN); |
| } |
| |
| static void _stm32_qspi_wait_for_not_busy(struct stm32_qspi_priv *priv) |
| { |
| while (readl(&priv->regs->sr) & STM32_QSPI_SR_BUSY) |
| ; |
| } |
| |
| static void _stm32_qspi_wait_for_complete(struct stm32_qspi_priv *priv) |
| { |
| while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_TCF)) |
| ; |
| } |
| |
| static void _stm32_qspi_wait_for_ftf(struct stm32_qspi_priv *priv) |
| { |
| while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_FTF)) |
| ; |
| } |
| |
| static void _stm32_qspi_set_flash_size(struct stm32_qspi_priv *priv, u32 size) |
| { |
| u32 fsize = fls(size) - 1; |
| clrsetbits_le32(&priv->regs->dcr, |
| STM32_QSPI_DCR_FSIZE_MASK << STM32_QSPI_DCR_FSIZE_SHIFT, |
| fsize << STM32_QSPI_DCR_FSIZE_SHIFT); |
| } |
| |
| static unsigned int _stm32_qspi_gen_ccr(struct stm32_qspi_priv *priv) |
| { |
| unsigned int ccr_reg = 0; |
| u8 imode, admode, dmode; |
| u32 mode = priv->mode; |
| u32 cmd = (priv->command & STM32_QSPI_CCR_INSTRUCTION_MASK); |
| |
| imode = STM32_QSPI_CCR_IMODE_ONE_LINE; |
| admode = STM32_QSPI_CCR_ADMODE_ONE_LINE; |
| |
| if (mode & SPI_RX_QUAD) { |
| dmode = STM32_QSPI_CCR_DMODE_FOUR_LINE; |
| if (mode & SPI_TX_QUAD) { |
| imode = STM32_QSPI_CCR_IMODE_FOUR_LINE; |
| admode = STM32_QSPI_CCR_ADMODE_FOUR_LINE; |
| } |
| } else if (mode & SPI_RX_DUAL) { |
| dmode = STM32_QSPI_CCR_DMODE_TWO_LINE; |
| if (mode & SPI_TX_DUAL) { |
| imode = STM32_QSPI_CCR_IMODE_TWO_LINE; |
| admode = STM32_QSPI_CCR_ADMODE_TWO_LINE; |
| } |
| } else { |
| dmode = STM32_QSPI_CCR_DMODE_ONE_LINE; |
| } |
| |
| if (priv->command & CMD_HAS_DATA) |
| ccr_reg |= (dmode << STM32_QSPI_CCR_DMODE_SHIFT); |
| |
| if (priv->command & CMD_HAS_DUMMY) |
| ccr_reg |= ((priv->dummycycles & STM32_QSPI_CCR_DCYC_MASK) |
| << STM32_QSPI_CCR_DCYC_SHIFT); |
| |
| if (priv->command & CMD_HAS_ADR) { |
| ccr_reg |= (STM32_QSPI_CCR_ADSIZE_24BIT |
| << STM32_QSPI_CCR_ADSIZE_SHIFT); |
| ccr_reg |= (admode << STM32_QSPI_CCR_ADMODE_SHIFT); |
| } |
| ccr_reg |= (imode << STM32_QSPI_CCR_IMODE_SHIFT); |
| ccr_reg |= cmd; |
| return ccr_reg; |
| } |
| |
| static void _stm32_qspi_enable_mmap(struct stm32_qspi_priv *priv, |
| struct spi_flash *flash) |
| { |
| priv->command = flash->read_cmd | CMD_HAS_ADR | CMD_HAS_DATA |
| | CMD_HAS_DUMMY; |
| priv->dummycycles = flash->dummy_byte * 8; |
| |
| unsigned int ccr_reg = _stm32_qspi_gen_ccr(priv); |
| ccr_reg |= (STM32_QSPI_CCR_MEM_MAP << STM32_QSPI_CCR_FMODE_SHIFT); |
| |
| _stm32_qspi_wait_for_not_busy(priv); |
| |
| writel(ccr_reg, &priv->regs->ccr); |
| |
| priv->dummycycles = 0; |
| } |
| |
| static void _stm32_qspi_disable_mmap(struct stm32_qspi_priv *priv) |
| { |
| setbits_le32(&priv->regs->cr, STM32_QSPI_CR_ABORT); |
| } |
| |
| static void _stm32_qspi_set_xfer_length(struct stm32_qspi_priv *priv, |
| u32 length) |
| { |
| writel(length - 1, &priv->regs->dlr); |
| } |
| |
| static void _stm32_qspi_start_xfer(struct stm32_qspi_priv *priv, u32 cr_reg) |
| { |
| writel(cr_reg, &priv->regs->ccr); |
| |
| if (priv->command & CMD_HAS_ADR) |
| writel(priv->address, &priv->regs->ar); |
| } |
| |
| static int _stm32_qspi_xfer(struct stm32_qspi_priv *priv, |
| struct spi_flash *flash, unsigned int bitlen, |
| const u8 *dout, u8 *din, unsigned long flags) |
| { |
| unsigned int words = bitlen / 8; |
| |
| if (flags & SPI_XFER_MMAP) { |
| _stm32_qspi_enable_mmap(priv, flash); |
| return 0; |
| } else if (flags & SPI_XFER_MMAP_END) { |
| _stm32_qspi_disable_mmap(priv); |
| return 0; |
| } |
| |
| if (bitlen == 0) |
| return -1; |
| |
| if (bitlen % 8) { |
| debug("spi_xfer: Non byte aligned SPI transfer\n"); |
| return -1; |
| } |
| |
| if (dout && din) { |
| debug("spi_xfer: QSPI cannot have data in and data out set\n"); |
| return -1; |
| } |
| |
| if (!dout && (flags & SPI_XFER_BEGIN)) { |
| debug("spi_xfer: QSPI transfer must begin with command\n"); |
| return -1; |
| } |
| |
| if (dout) { |
| if (flags & SPI_XFER_BEGIN) { |
| /* data is command */ |
| priv->command = dout[0] | CMD_HAS_DATA; |
| if (words >= 4) { |
| /* address is here too */ |
| priv->address = (dout[1] << 16) | |
| (dout[2] << 8) | dout[3]; |
| priv->command |= CMD_HAS_ADR; |
| } |
| |
| if (words > 4) { |
| /* rest is dummy bytes */ |
| priv->dummycycles = (words - 4) * 8; |
| priv->command |= CMD_HAS_DUMMY; |
| } |
| |
| if (flags & SPI_XFER_END) { |
| /* command without data */ |
| priv->command &= ~(CMD_HAS_DATA); |
| } |
| } |
| |
| if (flags & SPI_XFER_END) { |
| u32 ccr_reg = _stm32_qspi_gen_ccr(priv); |
| ccr_reg |= STM32_QSPI_CCR_IND_WRITE |
| << STM32_QSPI_CCR_FMODE_SHIFT; |
| |
| _stm32_qspi_wait_for_not_busy(priv); |
| |
| if (priv->command & CMD_HAS_DATA) |
| _stm32_qspi_set_xfer_length(priv, words); |
| |
| _stm32_qspi_start_xfer(priv, ccr_reg); |
| |
| debug("%s: write: ccr:0x%08x adr:0x%08x\n", |
| __func__, priv->regs->ccr, priv->regs->ar); |
| |
| if (priv->command & CMD_HAS_DATA) { |
| _stm32_qspi_wait_for_ftf(priv); |
| |
| debug("%s: words:%d data:", __func__, words); |
| |
| int i = 0; |
| while (words > i) { |
| writeb(dout[i], &priv->regs->dr); |
| debug("%02x ", dout[i]); |
| i++; |
| } |
| debug("\n"); |
| |
| _stm32_qspi_wait_for_complete(priv); |
| } else { |
| _stm32_qspi_wait_for_not_busy(priv); |
| } |
| } |
| } else if (din) { |
| u32 ccr_reg = _stm32_qspi_gen_ccr(priv); |
| ccr_reg |= STM32_QSPI_CCR_IND_READ |
| << STM32_QSPI_CCR_FMODE_SHIFT; |
| |
| _stm32_qspi_wait_for_not_busy(priv); |
| |
| _stm32_qspi_set_xfer_length(priv, words); |
| |
| _stm32_qspi_start_xfer(priv, ccr_reg); |
| |
| debug("%s: read: ccr:0x%08x adr:0x%08x len:%d\n", __func__, |
| priv->regs->ccr, priv->regs->ar, priv->regs->dlr); |
| |
| debug("%s: data:", __func__); |
| |
| int i = 0; |
| while (words > i) { |
| din[i] = readb(&priv->regs->dr); |
| debug("%02x ", din[i]); |
| i++; |
| } |
| debug("\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int stm32_qspi_ofdata_to_platdata(struct udevice *bus) |
| { |
| struct fdt_resource res_regs, res_mem; |
| struct stm32_qspi_platdata *plat = bus->platdata; |
| const void *blob = gd->fdt_blob; |
| int node = bus->of_offset; |
| int ret; |
| |
| ret = fdt_get_named_resource(blob, node, "reg", "reg-names", |
| "QuadSPI", &res_regs); |
| if (ret) { |
| debug("Error: can't get regs base addresses(ret = %d)!\n", ret); |
| return -ENOMEM; |
| } |
| ret = fdt_get_named_resource(blob, node, "reg", "reg-names", |
| "QuadSPI-memory", &res_mem); |
| if (ret) { |
| debug("Error: can't get mmap base address(ret = %d)!\n", ret); |
| return -ENOMEM; |
| } |
| |
| plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", |
| STM32_QSPI_DEFAULT_SCK_FREQ); |
| |
| plat->base = res_regs.start; |
| plat->memory_map = res_mem.start; |
| |
| debug("%s: regs=<0x%x> mapped=<0x%x>, max-frequency=%d\n", |
| __func__, |
| plat->base, |
| plat->memory_map, |
| plat->max_hz |
| ); |
| |
| return 0; |
| } |
| |
| static int stm32_qspi_probe(struct udevice *bus) |
| { |
| struct stm32_qspi_platdata *plat = dev_get_platdata(bus); |
| struct stm32_qspi_priv *priv = dev_get_priv(bus); |
| struct dm_spi_bus *dm_spi_bus; |
| |
| dm_spi_bus = bus->uclass_priv; |
| |
| dm_spi_bus->max_hz = plat->max_hz; |
| |
| priv->regs = (struct stm32_qspi_regs *)(uintptr_t)plat->base; |
| |
| priv->max_hz = plat->max_hz; |
| |
| clock_setup(QSPI_CLOCK_CFG); |
| |
| setbits_le32(&priv->regs->cr, STM32_QSPI_CR_SSHIFT); |
| |
| return 0; |
| } |
| |
| static int stm32_qspi_remove(struct udevice *bus) |
| { |
| return 0; |
| } |
| |
| static int stm32_qspi_claim_bus(struct udevice *dev) |
| { |
| struct stm32_qspi_priv *priv; |
| struct udevice *bus; |
| struct spi_flash *flash; |
| |
| bus = dev->parent; |
| priv = dev_get_priv(bus); |
| flash = dev_get_uclass_priv(dev); |
| |
| _stm32_qspi_set_flash_size(priv, flash->size); |
| |
| _stm32_qspi_enable(priv); |
| |
| return 0; |
| } |
| |
| static int stm32_qspi_release_bus(struct udevice *dev) |
| { |
| struct stm32_qspi_priv *priv; |
| struct udevice *bus; |
| |
| bus = dev->parent; |
| priv = dev_get_priv(bus); |
| |
| _stm32_qspi_disable(priv); |
| |
| return 0; |
| } |
| |
| static int stm32_qspi_xfer(struct udevice *dev, unsigned int bitlen, |
| const void *dout, void *din, unsigned long flags) |
| { |
| struct stm32_qspi_priv *priv; |
| struct udevice *bus; |
| struct spi_flash *flash; |
| |
| bus = dev->parent; |
| priv = dev_get_priv(bus); |
| flash = dev_get_uclass_priv(dev); |
| |
| return _stm32_qspi_xfer(priv, flash, bitlen, (const u8 *)dout, |
| (u8 *)din, flags); |
| } |
| |
| static int stm32_qspi_set_speed(struct udevice *bus, uint speed) |
| { |
| struct stm32_qspi_platdata *plat = bus->platdata; |
| struct stm32_qspi_priv *priv = dev_get_priv(bus); |
| |
| if (speed > plat->max_hz) |
| speed = plat->max_hz; |
| |
| u32 qspi_clk = clock_get(CLOCK_AHB); |
| u32 prescaler = 255; |
| if (speed > 0) { |
| prescaler = DIV_ROUND_UP(qspi_clk, speed) - 1; |
| if (prescaler > 255) |
| prescaler = 255; |
| else if (prescaler < 0) |
| prescaler = 0; |
| } |
| |
| u32 csht = DIV_ROUND_UP((5 * qspi_clk) / (prescaler + 1), 100000000); |
| csht = (csht - 1) & STM32_QSPI_DCR_CSHT_MASK; |
| |
| _stm32_qspi_wait_for_not_busy(priv); |
| |
| clrsetbits_le32(&priv->regs->cr, |
| STM32_QSPI_CR_PRESCALER_MASK << |
| STM32_QSPI_CR_PRESCALER_SHIFT, |
| prescaler << STM32_QSPI_CR_PRESCALER_SHIFT); |
| |
| |
| clrsetbits_le32(&priv->regs->dcr, |
| STM32_QSPI_DCR_CSHT_MASK << STM32_QSPI_DCR_CSHT_SHIFT, |
| csht << STM32_QSPI_DCR_CSHT_SHIFT); |
| |
| debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, |
| (qspi_clk / (prescaler + 1))); |
| |
| return 0; |
| } |
| |
| static int stm32_qspi_set_mode(struct udevice *bus, uint mode) |
| { |
| struct stm32_qspi_priv *priv = dev_get_priv(bus); |
| |
| _stm32_qspi_wait_for_not_busy(priv); |
| |
| if ((mode & SPI_CPHA) && (mode & SPI_CPOL)) |
| setbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE); |
| else if (!(mode & SPI_CPHA) && !(mode & SPI_CPOL)) |
| clrbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE); |
| else |
| return -ENODEV; |
| |
| if (mode & SPI_CS_HIGH) |
| return -ENODEV; |
| |
| if (mode & SPI_RX_QUAD) |
| priv->mode |= SPI_RX_QUAD; |
| else if (mode & SPI_RX_DUAL) |
| priv->mode |= SPI_RX_DUAL; |
| else |
| priv->mode &= ~(SPI_RX_QUAD | SPI_RX_DUAL); |
| |
| if (mode & SPI_TX_QUAD) |
| priv->mode |= SPI_TX_QUAD; |
| else if (mode & SPI_TX_DUAL) |
| priv->mode |= SPI_TX_DUAL; |
| else |
| priv->mode &= ~(SPI_TX_QUAD | SPI_TX_DUAL); |
| |
| debug("%s: regs=%p, mode=%d rx: ", __func__, priv->regs, mode); |
| |
| if (mode & SPI_RX_QUAD) |
| debug("quad, tx: "); |
| else if (mode & SPI_RX_DUAL) |
| debug("dual, tx: "); |
| else |
| debug("single, tx: "); |
| |
| if (mode & SPI_TX_QUAD) |
| debug("quad\n"); |
| else if (mode & SPI_TX_DUAL) |
| debug("dual\n"); |
| else |
| debug("single\n"); |
| |
| return 0; |
| } |
| |
| static const struct dm_spi_ops stm32_qspi_ops = { |
| .claim_bus = stm32_qspi_claim_bus, |
| .release_bus = stm32_qspi_release_bus, |
| .xfer = stm32_qspi_xfer, |
| .set_speed = stm32_qspi_set_speed, |
| .set_mode = stm32_qspi_set_mode, |
| }; |
| |
| static const struct udevice_id stm32_qspi_ids[] = { |
| { .compatible = "st,stm32-qspi" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(stm32_qspi) = { |
| .name = "stm32_qspi", |
| .id = UCLASS_SPI, |
| .of_match = stm32_qspi_ids, |
| .ops = &stm32_qspi_ops, |
| .ofdata_to_platdata = stm32_qspi_ofdata_to_platdata, |
| .platdata_auto_alloc_size = sizeof(struct stm32_qspi_platdata), |
| .priv_auto_alloc_size = sizeof(struct stm32_qspi_priv), |
| .probe = stm32_qspi_probe, |
| .remove = stm32_qspi_remove, |
| }; |