blob: f97ad3fc740142807ea56a56a5a132deeabcbbb1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2004 Texas Instruments.
* Copyright (C) 2009 David Brownell
*/
#include <common.h>
#include <netdev.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
/* offsets from PLL controller base */
#define PLLC_PLLCTL 0x100
#define PLLC_PLLM 0x110
#define PLLC_PREDIV 0x114
#define PLLC_PLLDIV1 0x118
#define PLLC_PLLDIV2 0x11c
#define PLLC_PLLDIV3 0x120
#define PLLC_POSTDIV 0x128
#define PLLC_BPDIV 0x12c
#define PLLC_PLLDIV4 0x160
#define PLLC_PLLDIV5 0x164
#define PLLC_PLLDIV6 0x168
#define PLLC_PLLDIV7 0x16c
#define PLLC_PLLDIV8 0x170
#define PLLC_PLLDIV9 0x174
unsigned int sysdiv[9] = {
PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5,
PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9
};
int clk_get(enum davinci_clk_ids id)
{
int pre_div;
int pllm;
int post_div;
int pll_out;
unsigned int pll_base;
pll_out = CONFIG_SYS_OSCIN_FREQ;
if (id == DAVINCI_AUXCLK_CLKID)
goto out;
if ((id >> 16) == 1)
pll_base = (unsigned int)davinci_pllc1_regs;
else
pll_base = (unsigned int)davinci_pllc0_regs;
id &= 0xFFFF;
/*
* Lets keep this simple. Combining operations can result in
* unexpected approximations
*/
pre_div = (readl(pll_base + PLLC_PREDIV) &
DAVINCI_PLLC_DIV_MASK) + 1;
pllm = readl(pll_base + PLLC_PLLM) + 1;
pll_out /= pre_div;
pll_out *= pllm;
if (id == DAVINCI_PLLM_CLKID)
goto out;
post_div = (readl(pll_base + PLLC_POSTDIV) &
DAVINCI_PLLC_DIV_MASK) + 1;
pll_out /= post_div;
if (id == DAVINCI_PLLC_CLKID)
goto out;
pll_out /= (readl(pll_base + sysdiv[id - 1]) &
DAVINCI_PLLC_DIV_MASK) + 1;
out:
return pll_out;
}
int set_cpu_clk_info(void)
{
gd->bd->bi_arm_freq = clk_get(DAVINCI_ARM_CLKID) / 1000000;
/* DDR PHY uses an x2 input clock */
gd->bd->bi_ddr_freq = cpu_is_da830() ? 0 :
(clk_get(DAVINCI_DDR_CLKID) / 1000000);
gd->bd->bi_dsp_freq = 0;
return 0;
}
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
int cpu_eth_init(bd_t *bis)
{
#if defined(CONFIG_DRIVER_TI_EMAC)
davinci_emac_initialize();
#endif
return 0;
}