| /* |
| * Timing controller driver for Allwinner SoCs. |
| * |
| * (C) Copyright 2013-2014 Luc Verhaegen <libv@skynet.be> |
| * (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com> |
| * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| |
| #include <asm/arch/clock.h> |
| #include <asm/arch/lcdc.h> |
| #include <asm/io.h> |
| |
| static int lcdc_get_clk_delay(const struct display_timing *mode, int tcon) |
| { |
| int delay; |
| |
| delay = mode->vfront_porch.typ + mode->vsync_len.typ + |
| mode->vback_porch.typ; |
| if (mode->flags & DISPLAY_FLAGS_INTERLACED) |
| delay /= 2; |
| if (tcon == 1) |
| delay -= 2; |
| |
| return (delay > 30) ? 30 : delay; |
| } |
| |
| void lcdc_init(struct sunxi_lcdc_reg * const lcdc) |
| { |
| /* Init lcdc */ |
| writel(0, &lcdc->ctrl); /* Disable tcon */ |
| writel(0, &lcdc->int0); /* Disable all interrupts */ |
| |
| /* Disable tcon0 dot clock */ |
| clrbits_le32(&lcdc->tcon0_dclk, SUNXI_LCDC_TCON0_DCLK_ENABLE); |
| |
| /* Set all io lines to tristate */ |
| writel(0xffffffff, &lcdc->tcon0_io_tristate); |
| writel(0xffffffff, &lcdc->tcon1_io_tristate); |
| } |
| |
| void lcdc_enable(struct sunxi_lcdc_reg * const lcdc, int depth) |
| { |
| setbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE); |
| #ifdef CONFIG_VIDEO_LCD_IF_LVDS |
| setbits_le32(&lcdc->tcon0_lvds_intf, SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE); |
| setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0); |
| #ifdef CONFIG_SUNXI_GEN_SUN6I |
| udelay(2); /* delay at least 1200 ns */ |
| setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_EN_MB); |
| udelay(2); /* delay at least 1200 ns */ |
| setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_DRVC); |
| if (depth == 18) |
| setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_DRVD(0x7)); |
| else |
| setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_DRVD(0xf)); |
| #else |
| setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_UPDATE); |
| udelay(2); /* delay at least 1200 ns */ |
| setbits_le32(&lcdc->lvds_ana1, SUNXI_LCDC_LVDS_ANA1_INIT1); |
| udelay(1); /* delay at least 120 ns */ |
| setbits_le32(&lcdc->lvds_ana1, SUNXI_LCDC_LVDS_ANA1_INIT2); |
| setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_UPDATE); |
| #endif |
| #endif |
| } |
| |
| void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc, |
| const struct display_timing *mode, |
| int clk_div, bool for_ext_vga_dac, |
| int depth, int dclk_phase) |
| { |
| int bp, clk_delay, total, val; |
| |
| #ifndef CONFIG_SUNXI_DE2 |
| /* Use tcon0 */ |
| clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK, |
| SUNXI_LCDC_CTRL_IO_MAP_TCON0); |
| #endif |
| |
| clk_delay = lcdc_get_clk_delay(mode, 0); |
| writel(SUNXI_LCDC_TCON0_CTRL_ENABLE | |
| SUNXI_LCDC_TCON0_CTRL_CLK_DELAY(clk_delay), &lcdc->tcon0_ctrl); |
| |
| writel(SUNXI_LCDC_TCON0_DCLK_ENABLE | |
| SUNXI_LCDC_TCON0_DCLK_DIV(clk_div), &lcdc->tcon0_dclk); |
| |
| writel(SUNXI_LCDC_X(mode->hactive.typ) | |
| SUNXI_LCDC_Y(mode->vactive.typ), &lcdc->tcon0_timing_active); |
| |
| bp = mode->hsync_len.typ + mode->hback_porch.typ; |
| total = mode->hactive.typ + mode->hfront_porch.typ + bp; |
| writel(SUNXI_LCDC_TCON0_TIMING_H_TOTAL(total) | |
| SUNXI_LCDC_TCON0_TIMING_H_BP(bp), &lcdc->tcon0_timing_h); |
| |
| bp = mode->vsync_len.typ + mode->vback_porch.typ; |
| total = mode->vactive.typ + mode->vfront_porch.typ + bp; |
| writel(SUNXI_LCDC_TCON0_TIMING_V_TOTAL(total) | |
| SUNXI_LCDC_TCON0_TIMING_V_BP(bp), &lcdc->tcon0_timing_v); |
| |
| #if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_VIDEO_DE2) |
| writel(SUNXI_LCDC_X(mode->hsync_len.typ) | |
| SUNXI_LCDC_Y(mode->vsync_len.typ), &lcdc->tcon0_timing_sync); |
| |
| writel(0, &lcdc->tcon0_hv_intf); |
| writel(0, &lcdc->tcon0_cpu_intf); |
| #endif |
| #ifdef CONFIG_VIDEO_LCD_IF_LVDS |
| val = (depth == 18) ? 1 : 0; |
| writel(SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(val) | |
| SUNXI_LCDC_TCON0_LVDS_CLK_SEL_TCON0, &lcdc->tcon0_lvds_intf); |
| #endif |
| |
| if (depth == 18 || depth == 16) { |
| writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[0]); |
| writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[1]); |
| writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[2]); |
| writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[3]); |
| writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[4]); |
| writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[5]); |
| writel(SUNXI_LCDC_TCON0_FRM_TAB0, &lcdc->tcon0_frm_table[0]); |
| writel(SUNXI_LCDC_TCON0_FRM_TAB1, &lcdc->tcon0_frm_table[1]); |
| writel(SUNXI_LCDC_TCON0_FRM_TAB2, &lcdc->tcon0_frm_table[2]); |
| writel(SUNXI_LCDC_TCON0_FRM_TAB3, &lcdc->tcon0_frm_table[3]); |
| writel(((depth == 18) ? |
| SUNXI_LCDC_TCON0_FRM_CTRL_RGB666 : |
| SUNXI_LCDC_TCON0_FRM_CTRL_RGB565), |
| &lcdc->tcon0_frm_ctrl); |
| } |
| |
| val = SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE(dclk_phase); |
| if (mode->flags & DISPLAY_FLAGS_HSYNC_LOW) |
| val |= SUNXI_LCDC_TCON_HSYNC_MASK; |
| if (mode->flags & DISPLAY_FLAGS_VSYNC_LOW) |
| val |= SUNXI_LCDC_TCON_VSYNC_MASK; |
| |
| #ifdef CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH |
| if (for_ext_vga_dac) |
| val = 0; |
| #endif |
| writel(val, &lcdc->tcon0_io_polarity); |
| |
| writel(0, &lcdc->tcon0_io_tristate); |
| } |
| |
| void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc, |
| const struct display_timing *mode, |
| bool ext_hvsync, bool is_composite) |
| { |
| int bp, clk_delay, total, val, yres; |
| |
| #ifndef CONFIG_SUNXI_DE2 |
| /* Use tcon1 */ |
| clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK, |
| SUNXI_LCDC_CTRL_IO_MAP_TCON1); |
| #endif |
| |
| clk_delay = lcdc_get_clk_delay(mode, 1); |
| writel(SUNXI_LCDC_TCON1_CTRL_ENABLE | |
| ((mode->flags & DISPLAY_FLAGS_INTERLACED) ? |
| SUNXI_LCDC_TCON1_CTRL_INTERLACE_ENABLE : 0) | |
| SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(clk_delay), &lcdc->tcon1_ctrl); |
| |
| yres = mode->vactive.typ; |
| if (mode->flags & DISPLAY_FLAGS_INTERLACED) |
| yres /= 2; |
| writel(SUNXI_LCDC_X(mode->hactive.typ) | SUNXI_LCDC_Y(yres), |
| &lcdc->tcon1_timing_source); |
| writel(SUNXI_LCDC_X(mode->hactive.typ) | SUNXI_LCDC_Y(yres), |
| &lcdc->tcon1_timing_scale); |
| writel(SUNXI_LCDC_X(mode->hactive.typ) | SUNXI_LCDC_Y(yres), |
| &lcdc->tcon1_timing_out); |
| |
| bp = mode->hsync_len.typ + mode->hback_porch.typ; |
| total = mode->hactive.typ + mode->hfront_porch.typ + bp; |
| writel(SUNXI_LCDC_TCON1_TIMING_H_TOTAL(total) | |
| SUNXI_LCDC_TCON1_TIMING_H_BP(bp), &lcdc->tcon1_timing_h); |
| |
| bp = mode->vsync_len.typ + mode->vback_porch.typ; |
| total = mode->vactive.typ + mode->vfront_porch.typ + bp; |
| if (!(mode->flags & DISPLAY_FLAGS_INTERLACED)) |
| total *= 2; |
| writel(SUNXI_LCDC_TCON1_TIMING_V_TOTAL(total) | |
| SUNXI_LCDC_TCON1_TIMING_V_BP(bp), &lcdc->tcon1_timing_v); |
| |
| writel(SUNXI_LCDC_X(mode->hsync_len.typ) | |
| SUNXI_LCDC_Y(mode->vsync_len.typ), &lcdc->tcon1_timing_sync); |
| |
| if (ext_hvsync) { |
| val = 0; |
| if (mode->flags & DISPLAY_FLAGS_HSYNC_HIGH) |
| val |= SUNXI_LCDC_TCON_HSYNC_MASK; |
| if (mode->flags & DISPLAY_FLAGS_VSYNC_HIGH) |
| val |= SUNXI_LCDC_TCON_VSYNC_MASK; |
| writel(val, &lcdc->tcon1_io_polarity); |
| |
| clrbits_le32(&lcdc->tcon1_io_tristate, |
| SUNXI_LCDC_TCON_VSYNC_MASK | |
| SUNXI_LCDC_TCON_HSYNC_MASK); |
| } |
| |
| #ifdef CONFIG_MACH_SUN5I |
| if (is_composite) |
| clrsetbits_le32(&lcdc->mux_ctrl, SUNXI_LCDC_MUX_CTRL_SRC0_MASK, |
| SUNXI_LCDC_MUX_CTRL_SRC0(1)); |
| #endif |
| } |
| |
| void lcdc_pll_set(struct sunxi_ccm_reg *ccm, int tcon, int dotclock, |
| int *clk_div, int *clk_double, bool is_composite) |
| { |
| int value, n, m, min_m, max_m, diff; |
| int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF; |
| int best_double = 0; |
| bool use_mipi_pll = false; |
| |
| if (tcon == 0) { |
| #if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_SUNXI_DE2) |
| min_m = 6; |
| max_m = 127; |
| #endif |
| #ifdef CONFIG_VIDEO_LCD_IF_LVDS |
| min_m = 7; |
| max_m = 7; |
| #endif |
| } else { |
| min_m = 1; |
| max_m = 15; |
| } |
| |
| /* |
| * Find the lowest divider resulting in a matching clock, if there |
| * is no match, pick the closest lower clock, as monitors tend to |
| * not sync to higher frequencies. |
| */ |
| for (m = min_m; m <= max_m; m++) { |
| #ifndef CONFIG_SUNXI_DE2 |
| n = (m * dotclock) / 3000; |
| |
| if ((n >= 9) && (n <= 127)) { |
| value = (3000 * n) / m; |
| diff = dotclock - value; |
| if (diff < best_diff) { |
| best_diff = diff; |
| best_m = m; |
| best_n = n; |
| best_double = 0; |
| } |
| } |
| |
| /* These are just duplicates */ |
| if (!(m & 1)) |
| continue; |
| #endif |
| |
| /* No double clock on DE2 */ |
| n = (m * dotclock) / 6000; |
| if ((n >= 9) && (n <= 127)) { |
| value = (6000 * n) / m; |
| diff = dotclock - value; |
| if (diff < best_diff) { |
| best_diff = diff; |
| best_m = m; |
| best_n = n; |
| best_double = 1; |
| } |
| } |
| } |
| |
| #ifdef CONFIG_MACH_SUN6I |
| /* |
| * Use the MIPI pll if we've been unable to find any matching setting |
| * for PLL3, this happens with high dotclocks because of min_m = 6. |
| */ |
| if (tcon == 0 && best_n == 0) { |
| use_mipi_pll = true; |
| best_m = 6; /* Minimum m for tcon0 */ |
| } |
| |
| if (use_mipi_pll) { |
| clock_set_pll3(297000000); /* Fix the video pll at 297 MHz */ |
| clock_set_mipi_pll(best_m * dotclock * 1000); |
| debug("dotclock: %dkHz = %dkHz via mipi pll\n", |
| dotclock, clock_get_mipi_pll() / best_m / 1000); |
| } else |
| #endif |
| { |
| clock_set_pll3(best_n * 3000000); |
| debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n", |
| dotclock, |
| (best_double + 1) * clock_get_pll3() / best_m / 1000, |
| best_double + 1, best_n, best_m); |
| } |
| |
| if (tcon == 0) { |
| u32 pll; |
| |
| if (use_mipi_pll) |
| pll = CCM_LCD_CH0_CTRL_MIPI_PLL; |
| else if (best_double) |
| pll = CCM_LCD_CH0_CTRL_PLL3_2X; |
| else |
| pll = CCM_LCD_CH0_CTRL_PLL3; |
| #ifndef CONFIG_SUNXI_DE2 |
| writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll, |
| &ccm->lcd0_ch0_clk_cfg); |
| #else |
| writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll, |
| &ccm->lcd0_clk_cfg); |
| #endif |
| } |
| #ifndef CONFIG_SUNXI_DE2 |
| else { |
| writel(CCM_LCD_CH1_CTRL_GATE | |
| (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X : |
| CCM_LCD_CH1_CTRL_PLL3) | |
| CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg); |
| if (is_composite) |
| setbits_le32(&ccm->lcd0_ch1_clk_cfg, |
| CCM_LCD_CH1_CTRL_HALF_SCLK1); |
| } |
| #endif |
| |
| *clk_div = best_m; |
| *clk_double = best_double; |
| } |