| /* |
| * U-boot - start.S Startup file of u-boot for BF533/BF561 |
| * |
| * Copyright (c) 2005-2007 Analog Devices Inc. |
| * |
| * This file is based on head.S |
| * Copyright (c) 2003 Metrowerks/Motorola |
| * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, |
| * Kenneth Albanowski <kjahds@kjahds.com>, |
| * The Silver Hammer Group, Ltd. |
| * (c) 1995, Dionne & Associates |
| * (c) 1995, DKG Display Tech. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| /* |
| * Note: A change in this file subsequently requires a change in |
| * board/$(board_name)/config.mk for a valid u-boot.bin |
| */ |
| |
| #define ASSEMBLY |
| |
| #include <linux/config.h> |
| #include <config.h> |
| #include <asm/blackfin.h> |
| |
| #include <asm/mach-common/bits/core.h> |
| #include <asm/mach-common/bits/dma.h> |
| #include <asm/mach-common/bits/pll.h> |
| |
| .global _stext; |
| .global __bss_start; |
| .global start; |
| .global _start; |
| .global _rambase; |
| .global _ramstart; |
| .global _ramend; |
| .global edata; |
| .global _initialize; |
| .global _exit; |
| .global flashdataend; |
| .global init_sdram; |
| |
| .text |
| _start: |
| start: |
| _stext: |
| |
| R0 = 0x32; |
| SYSCFG = R0; |
| SSYNC; |
| |
| /* |
| * As per HW reference manual DAG registers, |
| * DATA and Address resgister shall be zero'd |
| * in initialization, after a reset state |
| */ |
| r1 = 0; /* Data registers zero'd */ |
| r2 = 0; |
| r3 = 0; |
| r4 = 0; |
| r5 = 0; |
| r6 = 0; |
| r7 = 0; |
| |
| p0 = 0; /* Address registers zero'd */ |
| p1 = 0; |
| p2 = 0; |
| p3 = 0; |
| p4 = 0; |
| p5 = 0; |
| |
| i0 = 0; /* DAG Registers zero'd */ |
| i1 = 0; |
| i2 = 0; |
| i3 = 0; |
| m0 = 0; |
| m1 = 0; |
| m3 = 0; |
| m3 = 0; |
| l0 = 0; |
| l1 = 0; |
| l2 = 0; |
| l3 = 0; |
| b0 = 0; |
| b1 = 0; |
| b2 = 0; |
| b3 = 0; |
| |
| /* |
| * Set loop counters to zero, to make sure that |
| * hw loops are disabled. |
| */ |
| r0 = 0; |
| lc0 = r0; |
| lc1 = r0; |
| |
| SSYNC; |
| |
| /* Check soft reset status */ |
| p0.h = SWRST >> 16; |
| p0.l = SWRST & 0xFFFF; |
| r0.l = w[p0]; |
| |
| cc = bittst(r0, 15); |
| if !cc jump no_soft_reset; |
| |
| /* Clear Soft reset */ |
| r0 = 0x0000; |
| w[p0] = r0; |
| ssync; |
| |
| no_soft_reset: |
| nop; |
| |
| /* Clear EVT registers */ |
| p0.h = (EVT0 >> 16); |
| p0.l = (EVT0 & 0xFFFF); |
| p0 += 8; |
| p1 = 14; |
| r1 = 0; |
| LSETUP(4,4) lc0 = p1; |
| [ p0 ++ ] = r1; |
| |
| p0.h = hi(SICA_IWR0); |
| p0.l = lo(SICA_IWR0); |
| r0.l = 0x1; |
| w[p0] = r0.l; |
| SSYNC; |
| |
| sp.l = (0xffb01000 & 0xFFFF); |
| sp.h = (0xffb01000 >> 16); |
| |
| /* |
| * Check if the code is in SDRAM |
| * If the code is in SDRAM, skip SDRAM initializaiton |
| */ |
| call get_pc; |
| r3.l = 0x0; |
| r3.h = 0x2000; |
| cc = r0 < r3 (iu); |
| if cc jump sdram_initialized; |
| call init_sdram; |
| /* relocate into to RAM */ |
| sdram_initialized: |
| call get_pc; |
| offset: |
| r2.l = offset; |
| r2.h = offset; |
| r3.l = start; |
| r3.h = start; |
| r1 = r2 - r3; |
| |
| r0 = r0 - r1; |
| p1 = r0; |
| |
| p2.l = (CFG_MONITOR_BASE & 0xffff); |
| p2.h = (CFG_MONITOR_BASE >> 16); |
| |
| p3 = 0x04; |
| p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); |
| p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); |
| loop1: |
| r1 = [p1 ++ p3]; |
| [p2 ++ p3] = r1; |
| cc=p2==p4; |
| if !cc jump loop1; |
| /* |
| * configure STACK |
| */ |
| r0.h = (CONFIG_STACKBASE >> 16); |
| r0.l = (CONFIG_STACKBASE & 0xFFFF); |
| sp = r0; |
| fp = sp; |
| |
| /* |
| * This next section keeps the processor in supervisor mode |
| * during kernel boot. Switches to user mode at end of boot. |
| * See page 3-9 of Hardware Reference manual for documentation. |
| */ |
| |
| /* To keep ourselves in the supervisor mode */ |
| p0.l = (EVT15 & 0xFFFF); |
| p0.h = (EVT15 >> 16); |
| |
| p1.l = _real_start; |
| p1.h = _real_start; |
| [p0] = p1; |
| |
| p0.l = (IMASK & 0xFFFF); |
| p0.h = (IMASK >> 16); |
| r0.l = LO(EVT_IVG15); |
| r0.h = HI(EVT_IVG15); |
| [p0] = r0; |
| raise 15; |
| p0.l = WAIT_HERE; |
| p0.h = WAIT_HERE; |
| reti = p0; |
| rti; |
| |
| WAIT_HERE: |
| jump WAIT_HERE; |
| |
| .global _real_start; |
| _real_start: |
| [ -- sp ] = reti; |
| |
| /* DMA reset code to Hi of L1 SRAM */ |
| copy: |
| P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ |
| P1.L = lo(SYSMMR_BASE); |
| |
| R0.H = reset_start; /* Source Address (high) */ |
| R0.L = reset_start; /* Source Address (low) */ |
| R1.H = reset_end; |
| R1.L = reset_end; |
| R2 = R1 - R0; /* Count */ |
| R1.H = hi(L1_INST_SRAM); /* Destination Address (high) */ |
| R1.L = lo(L1_INST_SRAM); /* Destination Address (low) */ |
| R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ |
| R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ |
| |
| DMA: |
| R6 = 0x1 (Z); |
| W[P1+OFFSET_(IMDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ |
| W[P1+OFFSET_(IMDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ |
| |
| [P1+OFFSET_(IMDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ |
| W[P1+OFFSET_(IMDMA_S0_X_COUNT)] = R2; /* Set Source Count */ |
| /* Set Source DMAConfig = DMA Enable, |
| Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ |
| W[P1+OFFSET_(IMDMA_S0_CONFIG)] = R3; |
| |
| [P1+OFFSET_(IMDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ |
| W[P1+OFFSET_(IMDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ |
| /* Set Destination DMAConfig = DMA Enable, |
| Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ |
| W[P1+OFFSET_(IMDMA_D0_CONFIG)] = R4; |
| |
| WAIT_DMA_DONE: |
| p0.h = hi(IMDMA_D0_IRQ_STATUS); |
| p0.l = lo(IMDMA_D0_IRQ_STATUS); |
| R0 = W[P0](Z); |
| CC = BITTST(R0, 0); |
| if ! CC jump WAIT_DMA_DONE |
| |
| R0 = 0x1; |
| W[P1+OFFSET_(IMDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ |
| |
| /* Initialize BSS Section with 0 s */ |
| p1.l = __bss_start; |
| p1.h = __bss_start; |
| p2.l = _end; |
| p2.h = _end; |
| r1 = p1; |
| r2 = p2; |
| r3 = r2 - r1; |
| r3 = r3 >> 2; |
| p3 = r3; |
| lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; |
| CC = p2<=p1; |
| if CC jump _clear_bss_skip; |
| r0 = 0; |
| _clear_bss: |
| _clear_bss_end: |
| [p1++] = r0; |
| _clear_bss_skip: |
| |
| p0.l = _start1; |
| p0.h = _start1; |
| jump (p0); |
| |
| reset_start: |
| p0.h = WDOG_CNT >> 16; |
| p0.l = WDOG_CNT & 0xffff; |
| r0 = 0x0010; |
| w[p0] = r0; |
| p0.h = WDOG_CTL >> 16; |
| p0.l = WDOG_CTL & 0xffff; |
| r0 = 0x0000; |
| w[p0] = r0; |
| reset_wait: |
| jump reset_wait; |
| |
| reset_end: nop; |
| |
| _exit: |
| jump.s _exit; |
| get_pc: |
| r0 = rets; |
| rts; |