| // SPDX-License-Identifier: (GPL-2.0) |
| /* |
| * support for the imx6 based aristainetos2c board |
| * |
| * Copyright (C) 2019 Heiko Schocher <hs@denx.de> |
| * Copyright (C) 2015 Heiko Schocher <hs@denx.de> |
| * |
| */ |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/clock/imx6qdl-clock.h> |
| |
| #include "imx6qdl-aristainetos2-common.dtsi" |
| |
| / { |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio>; |
| |
| LED_blue { |
| label = "led_blue"; |
| gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| LED_green { |
| label = "led_green"; |
| gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| LED_red { |
| label = "led_red"; |
| gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| LED_yellow { |
| label = "led_yellow"; |
| gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| LED_ena { |
| label = "led_ena"; |
| gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| }; |
| |
| &ecspi1 { |
| fsl,spi-num-chipselects = <3>; |
| cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH |
| &gpio4 10 GPIO_ACTIVE_HIGH |
| &gpio4 11 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| status = "okay"; |
| pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; |
| pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; |
| |
| flash: m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,n25q128a11", "jedec,spi-nor"; |
| spi-max-frequency = <20000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &ecspi4 { |
| fsl,spi-num-chipselects = <2>; |
| cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi4>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| tpm@20 { |
| compatible = "infineon,slb9645tt"; |
| reg = <0x20>; |
| }; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| status = "okay"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; |
| no-1-8-v; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| bus-width = <8>; |
| no-1-8-v; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 |
| /* SS0# */ |
| MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 |
| /* SS1# */ |
| MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 |
| /* SS2# */ |
| MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 |
| /* WP pin NOR Flash */ |
| MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 |
| /* Flash nReset */ |
| MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0 |
| >; |
| }; |
| |
| pinctrl_ecspi4: ecspi4grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 |
| MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ |
| MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ |
| >; |
| }; |
| |
| pinctrl_gpio: gpiogrp { |
| fsl,pins = < |
| /* led enable */ |
| MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 |
| /* LCD power enable */ |
| MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0 |
| /* led yellow */ |
| MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0 |
| /* led red */ |
| MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0 |
| /* led green */ |
| MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0 |
| /* led blue */ |
| MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0 |
| /* Profibus IRQ */ |
| MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 |
| /* FPGA IRQ currently unused*/ |
| MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 |
| /* Display reset because of clock failure */ |
| MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0 |
| /* spi bus #2 SS driver enable */ |
| MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 |
| /* RST_LOC# PHY reset input (has pull-down!)*/ |
| MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0 |
| /* Touchscreen IRQ */ |
| MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 |
| /* PCIe reset */ |
| MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0 |
| /* make sure pin is GPIO and not ENET_REF_CLK */ |
| MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0 |
| /* TPM PP */ |
| MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x4001b0b0 |
| /* TPM Reset */ |
| MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 |
| MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 |
| MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 |
| MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 |
| MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 |
| MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 |
| MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 |
| MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 |
| /* SD1 card detect input */ |
| MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 |
| /* SD1 write protect input */ |
| MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 |
| MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 |
| MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 |
| MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 |
| >; |
| }; |
| }; |