| /* |
| * (C) Copyright 2010 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Aneesh V <aneesh@ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <spl.h> |
| #include <asm/u-boot.h> |
| #include <mmc.h> |
| #include <version.h> |
| #include <image.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector) |
| { |
| unsigned long err; |
| u32 image_size_sectors; |
| struct image_header *header; |
| |
| header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - |
| sizeof(struct image_header)); |
| |
| /* read image header to find the image size & load address */ |
| err = mmc->block_dev.block_read(0, sector, 1, header); |
| if (err == 0) |
| goto end; |
| |
| if (image_get_magic(header) != IH_MAGIC) |
| return -1; |
| |
| spl_parse_image_header(header); |
| |
| /* convert size to sectors - round up */ |
| image_size_sectors = (spl_image.size + mmc->read_bl_len - 1) / |
| mmc->read_bl_len; |
| |
| /* Read the header too to avoid extra memcpy */ |
| err = mmc->block_dev.block_read(0, sector, image_size_sectors, |
| (void *)spl_image.load_addr); |
| |
| end: |
| #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT |
| if (err == 0) |
| printf("spl: mmc blk read err - %lu\n", err); |
| #endif |
| |
| return (err == 0); |
| } |
| |
| #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION |
| static int mmc_load_image_raw_partition(struct mmc *mmc, int partition) |
| { |
| disk_partition_t info; |
| |
| if (get_partition_info(&mmc->block_dev, partition, &info)) { |
| #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT |
| printf("spl: partition error\n"); |
| #endif |
| return -1; |
| } |
| |
| return mmc_load_image_raw_sector(mmc, info.start); |
| } |
| #endif |
| |
| #ifdef CONFIG_SPL_OS_BOOT |
| static int mmc_load_image_raw_os(struct mmc *mmc) |
| { |
| if (!mmc->block_dev.block_read(0, |
| CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, |
| CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS, |
| (void *)CONFIG_SYS_SPL_ARGS_ADDR)) { |
| #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT |
| printf("mmc args blk read error\n"); |
| #endif |
| return -1; |
| } |
| |
| return mmc_load_image_raw_sector(mmc, |
| CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR); |
| } |
| #endif |
| |
| void spl_mmc_load_image(void) |
| { |
| struct mmc *mmc; |
| int err; |
| u32 boot_mode; |
| |
| mmc_initialize(gd->bd); |
| /* We register only one device. So, the dev id is always 0 */ |
| mmc = find_mmc_device(0); |
| if (!mmc) { |
| #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT |
| puts("spl: mmc device not found!!\n"); |
| #endif |
| hang(); |
| } |
| |
| err = mmc_init(mmc); |
| if (err) { |
| #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT |
| printf("spl: mmc init failed: err - %d\n", err); |
| #endif |
| hang(); |
| } |
| |
| boot_mode = spl_boot_mode(); |
| if (boot_mode == MMCSD_MODE_RAW) { |
| debug("boot mode - RAW\n"); |
| #ifdef CONFIG_SPL_OS_BOOT |
| if (spl_start_uboot() || mmc_load_image_raw_os(mmc)) |
| #endif |
| #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION |
| err = mmc_load_image_raw_partition(mmc, |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION); |
| #else |
| err = mmc_load_image_raw_sector(mmc, |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); |
| #endif |
| #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) |
| } |
| if (err || boot_mode == MMCSD_MODE_FS) { |
| debug("boot mode - FS\n"); |
| #ifdef CONFIG_SPL_FAT_SUPPORT |
| #ifdef CONFIG_SPL_OS_BOOT |
| if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev, |
| CONFIG_SYS_MMCSD_FS_BOOT_PARTITION)) |
| #endif |
| err = spl_load_image_fat(&mmc->block_dev, |
| CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, |
| CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); |
| if(err) |
| #endif /* CONFIG_SPL_FAT_SUPPORT */ |
| { |
| #ifdef CONFIG_SPL_EXT_SUPPORT |
| #ifdef CONFIG_SPL_OS_BOOT |
| if (spl_start_uboot() || spl_load_image_ext_os(&mmc->block_dev, |
| CONFIG_SYS_MMCSD_FS_BOOT_PARTITION)) |
| #endif |
| err = spl_load_image_ext(&mmc->block_dev, |
| CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, |
| CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); |
| #endif /* CONFIG_SPL_EXT_SUPPORT */ |
| } |
| #endif /* defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) */ |
| #ifdef CONFIG_SUPPORT_EMMC_BOOT |
| } else if (boot_mode == MMCSD_MODE_EMMCBOOT) { |
| /* |
| * We need to check what the partition is configured to. |
| * 1 and 2 match up to boot0 / boot1 and 7 is user data |
| * which is the first physical partition (0). |
| */ |
| int part = (mmc->part_config >> 3) & PART_ACCESS_MASK; |
| |
| if (part == 7) |
| part = 0; |
| |
| if (mmc_switch_part(0, part)) { |
| #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT |
| puts("MMC partition switch failed\n"); |
| #endif |
| hang(); |
| } |
| #ifdef CONFIG_SPL_OS_BOOT |
| if (spl_start_uboot() || mmc_load_image_raw_os(mmc)) |
| #endif |
| err = mmc_load_image_raw_sector(mmc, |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); |
| #endif |
| } |
| |
| switch(boot_mode){ |
| case MMCSD_MODE_RAW: |
| #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) |
| case MMCSD_MODE_FS: |
| #endif |
| #ifdef CONFIG_SUPPORT_EMMC_BOOT |
| case MMCSD_MODE_EMMCBOOT: |
| #endif |
| /* Boot mode is ok. Nothing to do. */ |
| break; |
| case MMCSD_MODE_UNDEFINED: |
| default: |
| #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT |
| puts("spl: wrong MMC boot mode\n"); |
| #endif |
| hang(); |
| } |
| |
| if (err) |
| hang(); |
| } |