| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * UTMI clock support for AT91 architectures. |
| * |
| * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries |
| * |
| * Author: Claudiu Beznea <claudiu.beznea@microchip.com> |
| * |
| * Based on drivers/clk/at91/clk-utmi.c from Linux. |
| */ |
| #include <asm/processor.h> |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <linux/clk-provider.h> |
| #include <linux/clk/at91_pmc.h> |
| #include <mach/at91_sfr.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| |
| #include "pmc.h" |
| |
| #define UBOOT_DM_CLK_AT91_UTMI "at91-utmi-clk" |
| #define UBOOT_DM_CLK_AT91_SAMA7G5_UTMI "at91-sama7g5-utmi-clk" |
| |
| /* |
| * The purpose of this clock is to generate a 480 MHz signal. A different |
| * rate can't be configured. |
| */ |
| #define UTMI_RATE 480000000 |
| |
| struct clk_utmi { |
| void __iomem *base; |
| struct regmap *regmap_sfr; |
| struct clk clk; |
| }; |
| |
| #define to_clk_utmi(_clk) container_of(_clk, struct clk_utmi, clk) |
| |
| static inline bool clk_utmi_ready(struct regmap *regmap) |
| { |
| unsigned int status; |
| |
| pmc_read(regmap, AT91_PMC_SR, &status); |
| |
| return !!(status & AT91_PMC_LOCKU); |
| } |
| |
| static int clk_utmi_enable(struct clk *clk) |
| { |
| struct clk_utmi *utmi = to_clk_utmi(clk); |
| unsigned int uckr = AT91_PMC_UPLLEN | AT91_PMC_UPLLCOUNT | |
| AT91_PMC_BIASEN; |
| unsigned int utmi_ref_clk_freq; |
| ulong parent_rate = clk_get_parent_rate(clk); |
| |
| /* |
| * If mainck rate is different from 12 MHz, we have to configure the |
| * FREQ field of the SFR_UTMICKTRIM register to generate properly |
| * the utmi clock. |
| */ |
| switch (parent_rate) { |
| case 12000000: |
| utmi_ref_clk_freq = 0; |
| break; |
| case 16000000: |
| utmi_ref_clk_freq = 1; |
| break; |
| case 24000000: |
| utmi_ref_clk_freq = 2; |
| break; |
| /* |
| * Not supported on SAMA5D2 but it's not an issue since MAINCK |
| * maximum value is 24 MHz. |
| */ |
| case 48000000: |
| utmi_ref_clk_freq = 3; |
| break; |
| default: |
| debug("UTMICK: unsupported mainck rate\n"); |
| return -EINVAL; |
| } |
| |
| if (utmi->regmap_sfr) { |
| regmap_update_bits(utmi->regmap_sfr, AT91_SFR_UTMICKTRIM, |
| AT91_UTMICKTRIM_FREQ, utmi_ref_clk_freq); |
| } else if (utmi_ref_clk_freq) { |
| debug("UTMICK: sfr node required\n"); |
| return -EINVAL; |
| } |
| |
| pmc_update_bits(utmi->base, AT91_CKGR_UCKR, uckr, uckr); |
| |
| while (!clk_utmi_ready(utmi->base)) { |
| debug("waiting for utmi...\n"); |
| cpu_relax(); |
| } |
| |
| return 0; |
| } |
| |
| static int clk_utmi_disable(struct clk *clk) |
| { |
| struct clk_utmi *utmi = to_clk_utmi(clk); |
| |
| pmc_update_bits(utmi->base, AT91_CKGR_UCKR, AT91_PMC_UPLLEN, 0); |
| |
| return 0; |
| } |
| |
| static ulong clk_utmi_get_rate(struct clk *clk) |
| { |
| /* UTMI clk rate is fixed. */ |
| return UTMI_RATE; |
| } |
| |
| static const struct clk_ops utmi_ops = { |
| .enable = clk_utmi_enable, |
| .disable = clk_utmi_disable, |
| .get_rate = clk_utmi_get_rate, |
| }; |
| |
| struct clk *at91_clk_register_utmi(void __iomem *base, struct udevice *dev, |
| const char *name, const char *parent_name) |
| { |
| struct udevice *syscon; |
| struct clk_utmi *utmi; |
| struct clk *clk; |
| int ret; |
| |
| if (!base || !dev || !name || !parent_name) |
| return ERR_PTR(-EINVAL); |
| |
| ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, |
| "regmap-sfr", &syscon); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| utmi = kzalloc(sizeof(*utmi), GFP_KERNEL); |
| if (!utmi) |
| return ERR_PTR(-ENOMEM); |
| |
| utmi->base = base; |
| utmi->regmap_sfr = syscon_get_regmap(syscon); |
| if (!utmi->regmap_sfr) { |
| kfree(utmi); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| clk = &utmi->clk; |
| clk->flags = CLK_GET_RATE_NOCACHE; |
| ret = clk_register(clk, UBOOT_DM_CLK_AT91_UTMI, name, parent_name); |
| if (ret) { |
| kfree(utmi); |
| clk = ERR_PTR(ret); |
| } |
| |
| return clk; |
| } |
| |
| U_BOOT_DRIVER(at91_utmi_clk) = { |
| .name = UBOOT_DM_CLK_AT91_UTMI, |
| .id = UCLASS_CLK, |
| .ops = &utmi_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |
| |
| static int clk_utmi_sama7g5_enable(struct clk *clk) |
| { |
| struct clk_utmi *utmi = to_clk_utmi(clk); |
| ulong parent_rate = clk_get_parent_rate(clk); |
| unsigned int val; |
| |
| switch (parent_rate) { |
| case 16000000: |
| val = 0; |
| break; |
| case 20000000: |
| val = 2; |
| break; |
| case 24000000: |
| val = 3; |
| break; |
| case 32000000: |
| val = 5; |
| break; |
| default: |
| debug("UTMICK: unsupported main_xtal rate\n"); |
| return -EINVAL; |
| } |
| |
| pmc_write(utmi->base, AT91_PMC_XTALF, val); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops sama7g5_utmi_ops = { |
| .enable = clk_utmi_sama7g5_enable, |
| .get_rate = clk_utmi_get_rate, |
| }; |
| |
| struct clk *at91_clk_sama7g5_register_utmi(void __iomem *base, |
| const char *name, const char *parent_name) |
| { |
| struct clk_utmi *utmi; |
| struct clk *clk; |
| int ret; |
| |
| if (!base || !name || !parent_name) |
| return ERR_PTR(-EINVAL); |
| |
| utmi = kzalloc(sizeof(*utmi), GFP_KERNEL); |
| if (!utmi) |
| return ERR_PTR(-ENOMEM); |
| |
| utmi->base = base; |
| |
| clk = &utmi->clk; |
| ret = clk_register(clk, UBOOT_DM_CLK_AT91_SAMA7G5_UTMI, name, |
| parent_name); |
| if (ret) { |
| kfree(utmi); |
| clk = ERR_PTR(ret); |
| } |
| |
| return clk; |
| } |
| |
| U_BOOT_DRIVER(at91_sama7g5_utmi_clk) = { |
| .name = UBOOT_DM_CLK_AT91_SAMA7G5_UTMI, |
| .id = UCLASS_CLK, |
| .ops = &sama7g5_utmi_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |