| .. SPDX-License-Identifier: GPL-2.0+ |
| .. Copyright 2023, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> |
| |
| bdinfo command |
| ============== |
| |
| Synopsis |
| -------- |
| |
| :: |
| |
| bdinfo |
| |
| Description |
| ----------- |
| |
| The *bdinfo* command prints information about the board. |
| |
| Example |
| ------- |
| |
| :: |
| |
| => bdinfo |
| boot_params = 0x0000000000000000 |
| DRAM bank = 0x0000000000000000 |
| -> start = 0x0000000040000000 |
| -> size = 0x0000000100000000 |
| flashstart = 0x0000000000000000 |
| flashsize = 0x0000000004000000 |
| flashoffset = 0x00000000000e87f8 |
| baudrate = 115200 bps |
| relocaddr = 0x000000013fefb000 |
| reloc off = 0x000000013fefb000 |
| Build = 64-bit |
| current eth = virtio-net#32 |
| ethaddr = 52:52:52:52:52:52 |
| IP addr = 10.0.2.15 |
| fdt_blob = 0x000000013edbadb0 |
| new_fdt = 0x000000013edbadb0 |
| fdt_size = 0x0000000000100000 |
| lmb_dump_all: |
| memory.cnt = 0x1 |
| memory[0] [0x40000000-0x13fffffff], 0x100000000 bytes flags: 0 |
| reserved.cnt = 0x2 |
| reserved[0] [0x13ddb3000-0x13fffffff], 0x0224d000 bytes flags: 0 |
| reserved[1] [0x13edb6930-0x13fffffff], 0x012496d0 bytes flags: 0 |
| devicetree = board |
| arch_number = 0x0000000000000000 |
| TLB addr = 0x000000013fff0000 |
| irq_sp = 0x000000013edbada0 |
| sp start = 0x000000013edbada0 |
| Early malloc usage: 3a8 / 2000 |
| => |
| |
| boot_params |
| address of the memory area for boot parameters |
| |
| DRAM bank |
| index, start address and end address of a memory bank |
| |
| baudrate |
| baud rate of the serial console |
| |
| relocaddr |
| address to which U-Boot has relocated itself |
| |
| reloc off |
| relocation offset, difference between *relocaddr* and the text base |
| |
| Build |
| bitness of the system |
| |
| current eth |
| name of the active network device |
| |
| IP addr |
| network address, value of the environment variable *ipaddr* |
| |
| fdt_blob |
| address of U-Boot's own device tree, NULL if none |
| |
| new_fdt |
| location of the relocated device tree |
| |
| fdt_size |
| space reserved for relocated device space |
| |
| lmb_dump_all |
| available memory and memory reservations |
| |
| devicetree |
| source of the device-tree |
| |
| arch_number |
| unique id for the board |
| |
| TLB addr |
| address of the translation lookaside buffer |
| |
| irq_sp |
| address of the IRQ stack pointer |
| |
| sp start |
| initial stack pointer address |
| |
| Early malloc usage |
| amount of memory used in the early malloc memory and its maximum size |
| as defined by CONFIGSYS_MALLOC_F_LEN |
| |
| Configuration |
| ------------- |
| |
| The bdinfo command is available if CONFIG_CMD_BDI=y. |
| |
| Return code |
| ----------- |
| |
| The return code $? is 0 (true). |