blob: a9362436000cd1e90c12f6c27e7bce2ea88027e1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Special driver to handle of-platdata
*
* Copyright 2019 Google LLC
*
* Some code from coreboot lpss.c
*/
#include <common.h>
#include <dm.h>
#include <dt-structs.h>
#include <malloc.h>
#include <ns16550.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/lpss.h>
#include <dm/device-internal.h>
#include <asm/arch/uart.h>
/* Low-power Subsystem (LPSS) clock register */
enum {
LPSS_CLOCK_CTL_REG = 0x200,
LPSS_CNT_CLOCK_EN = 1,
LPSS_CNT_CLK_UPDATE = 1U << 31,
LPSS_CLOCK_DIV_N_SHIFT = 16,
LPSS_CLOCK_DIV_N_MASK = 0x7fff << LPSS_CLOCK_DIV_N_SHIFT,
LPSS_CLOCK_DIV_M_SHIFT = 1,
LPSS_CLOCK_DIV_M_MASK = 0x7fff << LPSS_CLOCK_DIV_M_SHIFT,
/* These set the UART input clock speed */
LPSS_UART_CLK_M_VAL = 0x25a,
LPSS_UART_CLK_N_VAL = 0x7fff,
};
static void lpss_clk_update(void *regs, u32 clk_m_val, u32 clk_n_val)
{
u32 clk_sel;
clk_sel = clk_n_val << LPSS_CLOCK_DIV_N_SHIFT |
clk_m_val << LPSS_CLOCK_DIV_M_SHIFT;
clk_sel |= LPSS_CNT_CLK_UPDATE | LPSS_CNT_CLOCK_EN;
writel(clk_sel, regs + LPSS_CLOCK_CTL_REG);
}
static void uart_lpss_init(void *regs)
{
/* Take UART out of reset */
lpss_reset_release(regs);
/* Set M and N divisor inputs and enable clock */
lpss_clk_update(regs, LPSS_UART_CLK_M_VAL, LPSS_UART_CLK_N_VAL);
}
void apl_uart_init(pci_dev_t bdf, ulong base)
{
/* Set UART base address */
pci_x86_write_config(bdf, PCI_BASE_ADDRESS_0, base, PCI_SIZE_32);
/* Enable memory access and bus master */
pci_x86_write_config(bdf, PCI_COMMAND, PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER, PCI_SIZE_32);
uart_lpss_init((void *)base);
}
/*
* This driver uses its own compatible string but almost everything else from
* the standard ns16550 driver. This allows us to provide an of-platdata
* implementation, since the platdata produced by of-platdata does not match
* struct apl_ns16550_plat.
*
* When running with of-platdata (generally TPL), the platdata is converted to
* something that ns16550 expects. When running withoutof-platdata (SPL, U-Boot
* proper), we use ns16550's of_to_plat routine.
*/
static int apl_ns16550_probe(struct udevice *dev)
{
struct apl_ns16550_plat *plat = dev_get_plat(dev);
if (!CONFIG_IS_ENABLED(PCI))
apl_uart_init(plat->ns16550.bdf, plat->ns16550.base);
return ns16550_serial_probe(dev);
}
static int apl_ns16550_of_to_plat(struct udevice *dev)
{
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct dtd_intel_apl_ns16550 *dtplat;
struct apl_ns16550_plat *plat = dev_get_plat(dev);
struct ns16550_plat ns;
/*
* The device's plat uses struct apl_ns16550_plat which starts with the
* dtd struct, but the ns16550 driver expects it to be struct ns16550.
* Set up what that driver expects. Note that this means that the values
* cannot be read in this driver when using of-platdata.
*
* TODO(sjg@chromium.org): Consider having a separate plat pointer for
* of-platdata so that it is not necessary to overwrite this.
*/
dtplat = &plat->dtplat;
ns.base = dtplat->early_regs[0];
ns.reg_width = 1;
ns.reg_shift = dtplat->reg_shift;
ns.reg_offset = 0;
ns.clock = dtplat->clock_frequency;
ns.fcr = UART_FCR_DEFVAL;
ns.bdf = pci_ofplat_get_devfn(dtplat->reg[0]);
memcpy(plat, &ns, sizeof(ns));
#else
int ret;
ret = ns16550_serial_of_to_plat(dev);
if (ret)
return ret;
#endif /* OF_PLATDATA */
return 0;
}
#if CONFIG_IS_ENABLED(OF_REAL)
static const struct udevice_id apl_ns16550_serial_ids[] = {
{ .compatible = "intel,apl-ns16550" },
{ },
};
#endif
U_BOOT_DRIVER(intel_apl_ns16550) = {
.name = "intel_apl_ns16550",
.id = UCLASS_SERIAL,
.of_match = of_match_ptr(apl_ns16550_serial_ids),
.plat_auto = sizeof(struct apl_ns16550_plat),
.priv_auto = sizeof(struct ns16550),
.ops = &ns16550_serial_ops,
.of_to_plat = apl_ns16550_of_to_plat,
.probe = apl_ns16550_probe,
};