| // SPDX-License-Identifier: GPL-2.0+ OR MIT |
| /* |
| * Copyright 2020 Toradex |
| */ |
| |
| /dts-v1/; |
| |
| #include "fsl-imx8qxp.dtsi" |
| #include "fsl-imx8qxp-apalis-u-boot.dtsi" |
| |
| / { |
| model = "Toradex Apalis iMX8X"; |
| compatible = "toradex,apalis-imx8x", "fsl,imx8qxp"; |
| |
| chosen { |
| bootargs = "console=ttyLP1,115200"; |
| stdout-path = &lpuart1; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_usb_otg1_vbus: regulator@0 { |
| compatible = "regulator-fixed"; |
| reg = <0>; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>, <&pinctrl_reset_moci>; |
| |
| apalis-imx8x { |
| /* Apalis UART1 */ |
| pinctrl_lpuart1: lpuart1grp { |
| fsl,pins = < |
| SC_P_UART1_RX_ADMA_UART1_RX 0x06000020 /* SODIMM 118 */ |
| SC_P_UART1_TX_ADMA_UART1_TX 0x06000020 /* SODIMM 112 */ |
| >; |
| }; |
| |
| /* On-module Gigabit Ethernet PHY Micrel KSZ9031 */ |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x14a0 |
| SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x14a0 |
| SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 |
| SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 |
| SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61 |
| SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x61 |
| SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61 |
| SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61 |
| SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x61 |
| SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x61 |
| SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x61 |
| SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61 |
| SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61 |
| SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61 |
| SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x61 |
| SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x61 |
| /* On-module ETH_RESET# */ |
| SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x06000020 |
| /* On-module ETH_INT# */ |
| SC_P_ADC_IN2_LSIO_GPIO1_IO12 0x21 |
| >; |
| }; |
| |
| /* Apalis BKL_ON */ |
| pinctrl_gpio_bkl_on: gpio-bkl-on { |
| fsl,pins = < |
| SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 286 */ |
| >; |
| }; |
| |
| pinctrl_hog0: hog0grp { |
| fsl,pins = < |
| SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 |
| >; |
| }; |
| |
| pinctrl_hog1: hog1grp { |
| fsl,pins = < |
| /* Apalis USBO1_EN */ |
| SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x41 /* SODIMM 274 */ |
| >; |
| }; |
| |
| /* Apalis RESET_MOCI# */ |
| pinctrl_reset_moci: gpioresetmocigrp { |
| fsl,pins = < |
| SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x21 |
| >; |
| }; |
| |
| /* On-module eMMC */ |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 |
| SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21 |
| SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 |
| SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 |
| SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 |
| SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 |
| SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 |
| SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 |
| SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 |
| SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 |
| SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 |
| SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1grp100mhz { |
| fsl,pins = < |
| SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 |
| SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21 |
| SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 |
| SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 |
| SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 |
| SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 |
| SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 |
| SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 |
| SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 |
| SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 |
| SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 |
| SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1grp200mhz { |
| fsl,pins = < |
| SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 |
| SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21 |
| SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 |
| SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 |
| SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 |
| SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 |
| SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 |
| SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 |
| SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 |
| SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 |
| SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 |
| SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 |
| >; |
| }; |
| |
| /* Apalis MMC1_CD# */ |
| pinctrl_usdhc2_gpio: mmc1gpiogrp { |
| fsl,pins = < |
| SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x06000021 /* SODIMM 164 */ |
| >; |
| }; |
| |
| pinctrl_usdhc2_gpio_sleep: usdhc1gpioslpgrp { |
| fsl,pins = < |
| SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x60 /* SODIMM 164 */ |
| >; |
| }; |
| |
| /* Apalis USBH_EN */ |
| pinctrl_usbh_en: usbhen { |
| fsl,pins = < |
| SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x40 /* SODIMM 84 */ |
| >; |
| }; |
| |
| /* Apalis MMC1 */ |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */ |
| SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */ |
| SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */ |
| SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */ |
| SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */ |
| SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */ |
| SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2grp100mhz { |
| fsl,pins = < |
| SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */ |
| SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */ |
| SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */ |
| SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */ |
| SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */ |
| SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */ |
| SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2grp200mhz { |
| fsl,pins = < |
| SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */ |
| SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */ |
| SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */ |
| SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */ |
| SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */ |
| SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */ |
| SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 |
| >; |
| }; |
| |
| pinctrl_usdhc2_sleep: usdhc2slpgrp { |
| fsl,pins = < |
| SC_P_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 154 */ |
| SC_P_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 150 */ |
| SC_P_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 160 */ |
| SC_P_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 162 */ |
| SC_P_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 144 */ |
| SC_P_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 146 */ |
| SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 |
| >; |
| }; |
| }; |
| }; |
| |
| /* Apalis Gigabit LAN */ |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| fsl,magic-packet; |
| phy-handle = <ðphy0>; |
| phy-mode = "rgmii-id"; |
| phy-reset-duration = <10>; |
| phy-reset-post-delay = <150>; |
| phy-reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@4 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <4>; |
| }; |
| }; |
| }; |
| |
| /* Apalis UART1 */ |
| &lpuart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpuart1>; |
| status = "okay"; |
| }; |
| |
| /* On-module eMMC */ |
| &usdhc1 { |
| bus-width = <8>; |
| non-removable; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| status = "okay"; |
| }; |
| |
| /* Apalis MMC1 */ |
| &usdhc2 { |
| bus-width = <4>; |
| cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; |
| disable-wp; |
| status = "okay"; |
| }; |