| if TEGRA |
| |
| config TEGRA_COMMON |
| bool "Tegra common options" |
| select DM |
| select DM_ETH |
| select DM_GPIO |
| select DM_I2C |
| select DM_KEYBOARD |
| select DM_PCI |
| select DM_PCI_COMPAT |
| select DM_PWM |
| select DM_SERIAL |
| select DM_SPI |
| select DM_SPI_FLASH |
| select OF_CONTROL |
| select VIDCONSOLE_AS_LCD if DM_VIDEO |
| |
| config TEGRA_ARMV7_COMMON |
| bool "Tegra 32-bit common options" |
| select CPU_V7 |
| select SPL |
| select SUPPORT_SPL |
| select TEGRA_COMMON |
| |
| config TEGRA_ARMV8_COMMON |
| bool "Tegra 64-bit common options" |
| select ARM64 |
| select TEGRA_COMMON |
| |
| choice |
| prompt "Tegra SoC select" |
| optional |
| |
| config TEGRA20 |
| bool "Tegra20 family" |
| select TEGRA_ARMV7_COMMON |
| |
| config TEGRA30 |
| bool "Tegra30 family" |
| select TEGRA_ARMV7_COMMON |
| |
| config TEGRA114 |
| bool "Tegra114 family" |
| select TEGRA_ARMV7_COMMON |
| |
| config TEGRA124 |
| bool "Tegra124 family" |
| select TEGRA_ARMV7_COMMON |
| |
| config TEGRA210 |
| bool "Tegra210 family" |
| select TEGRA_ARMV8_COMMON |
| |
| endchoice |
| |
| config TEGRA_DISCONNECT_UDC_ON_BOOT |
| bool "Disconnect USB device mode controller on boot" |
| default y |
| help |
| When loading U-Boot into RAM over USB protocols using tools such as |
| tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device |
| mode controller is initialized and enumerated by the host PC running |
| the tool. Unfortunately, these tools do not shut down the USB |
| controller before executing the downloaded code, and so the host PC |
| does not "de-enumerate" the USB device. This option shuts down the |
| USB controller when U-Boot boots to avoid leaving a stale USB device |
| present. |
| |
| config SYS_MALLOC_F_LEN |
| default 0x1800 |
| |
| source "arch/arm/mach-tegra/tegra20/Kconfig" |
| source "arch/arm/mach-tegra/tegra30/Kconfig" |
| source "arch/arm/mach-tegra/tegra114/Kconfig" |
| source "arch/arm/mach-tegra/tegra124/Kconfig" |
| source "arch/arm/mach-tegra/tegra210/Kconfig" |
| |
| endif |