blob: 8787a872d85e4cbac05d6cebd811a5bea2faaddf [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020 Marvell International Ltd.
*
*/
/*
* Device Tree file for Marvell Armada AP806/AP807.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/dts-v1/;
/ {
compatible = "marvell,armada-ap806";
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
psci-area@4000000 {
reg = <0x0 0x4000000 0x0 0x200000>;
no-map;
};
};
AP_NAME {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
ranges;
config-space {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x0 0x0 0xf0000000 0x1000000>;
gic: interrupt-controller@210000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
reg = <0x210000 0x10000>,
<0x220000 0x20000>,
<0x240000 0x20000>,
<0x260000 0x20000>;
gic_v2m0: v2m@280000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x280000 0x1000>;
arm,msi-base-spi = <160>;
arm,msi-num-spis = <32>;
};
gic_v2m1: v2m@290000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x290000 0x1000>;
arm,msi-base-spi = <192>;
arm,msi-num-spis = <32>;
};
gic_v2m2: v2m@2a0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x2a0000 0x1000>;
arm,msi-base-spi = <224>;
arm,msi-num-spis = <32>;
};
gic_v2m3: v2m@2b0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x2b0000 0x1000>;
arm,msi-base-spi = <256>;
arm,msi-num-spis = <32>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
};
odmi: odmi@300000 {
compatible = "marvell,odmi-controller";
interrupt-controller;
msi-controller;
marvell,odmi-frames = <4>;
reg = <0x300000 0x4000>,
<0x304000 0x4000>,
<0x308000 0x4000>,
<0x30C000 0x4000>;
marvell,spi-base = <128>, <136>, <144>, <152>;
};
ap_pinctl: ap-pinctl@6F4000 {
compatible = "marvell,ap806-pinctrl";
bank-name ="apn-806";
reg = <0x6F4000 0x10>;
pin-count = <20>;
max-func = <3>;
ap_i2c0_pins: i2c-pins-0 {
marvell,pins = < 4 5 >;
marvell,function = <3>;
};
ap_emmc_pins: emmc-pins-0 {
marvell,pins = < 0 1 2 3 4 5 6 7
8 9 10 12 >;
marvell,function = <1>;
};
};
ap_gpio0: gpio@6F5040 {
compatible = "marvell,orion-gpio";
reg = <0x6F5040 0x40>;
ngpios = <20>;
gpio-controller;
#gpio-cells = <2>;
};
ap_spi0: spi@510600 {
compatible = "marvell,armada-380-spi";
reg = <0x510600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ap_syscon 3>;
status = "disabled";
};
ap_i2c0: i2c@511000 {
compatible = "marvell,mv78230-i2c";
reg = <0x511000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&ap_syscon 3>;
status = "disabled";
};
uart0: serial@512000 {
compatible = "snps,dw-apb-uart";
reg = <0x512000 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clocks = <&ap_syscon 3>;
status = "disabled";
clock-frequency = <200000000>;
};
uart1: serial@512100 {
compatible = "snps,dw-apb-uart";
reg = <0x512100 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clocks = <&ap_syscon 3>;
status = "disabled";
};
watchdog: watchdog@610000 {
compatible = "arm,sbsa-gwdt";
reg = <0x610000 0x1000>, <0x600000 0x1000>;
};
ap_sdhci0: sdhci@6e0000 {
compatible = "marvell,armada-8k-sdhci";
reg = <0x6e0000 0x300>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
status = "disabled";
};
ap_syscon: system-controller@6f4000 {
compatible = "marvell,ap806-system-controller",
"syscon";
#clock-cells = <1>;
clock-output-names = "ap-cpu-cluster-0",
"ap-cpu-cluster-1",
"ap-fixed", "ap-mss";
reg = <0x6f4000 0x1000>;
};
};
};
};