| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| // |
| // Copyright (C) 2020 PHYTEC Messtechnik GmbH |
| // Author: Jens Lang <J.Lang@phytec.de> |
| // Copyright (C) 2021 Fabio Estevam <festevam@denx.de> |
| |
| /dts-v1/; |
| #include <dt-bindings/gpio/gpio.h> |
| #include "imx7d.dtsi" |
| |
| / { |
| model = "Storopack SMEGW01 board"; |
| compatible = "storopack,imx7d-smegw01", "fsl,imx7d"; |
| |
| aliases { |
| mmc0 = &usdhc1; |
| mmc1 = &usdhc3; |
| mmc2 = &usdhc2; |
| rtc0 = &i2c_rtc; |
| rtc1 = &snvs_rtc; |
| }; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0x20000000>; |
| }; |
| |
| reg_lte_on: regulator-lte-on { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lte_on>; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "lte_on"; |
| gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| reg_lte_nreset: regulator-lte-nreset { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lte_nreset>; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "LTE_nReset"; |
| gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| reg_wifi: regulator-wifi { |
| compatible = "regulator-fixed"; |
| gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wifi>; |
| regulator-name = "wifi_reg"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_wlan_rfkill: regulator-wlan-rfkill { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-2 = <&pinctrl_rfkill>; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "wlan_rfkill"; |
| gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| reg_usbotg_vbus: regulator-usbotg-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| sram@0 { |
| compatible = "microchip,48l640"; |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| spi-max-frequency = <16000000>; |
| }; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, |
| <&clks IMX7D_ENET1_TIME_ROOT_CLK>; |
| assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| assigned-clock-rates = <0>, <100000000>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio: mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@1 { |
| compatible = "ethernet-phy-id0022.1622", |
| "ethernet-phy-ieee802.3-c22"; |
| reg = <1>; |
| reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; |
| }; |
| |
| ethphy1: ethernet-phy@2 { |
| compatible = "ethernet-phy-id0022.1622", |
| "ethernet-phy-ieee802.3-c22"; |
| reg = <2>; |
| }; |
| }; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, |
| <&clks IMX7D_ENET2_TIME_ROOT_CLK>; |
| assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| assigned-clock-rates = <0>, <100000000>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy1>; |
| fsl,magic-packet; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 =<&pinctrl_i2c2>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| i2c_rtc: rtc@52 { |
| compatible = "microcrystal,rv3028"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rtc_int>; |
| reg = <0x52>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <15 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| &flexcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| status = "okay"; |
| }; |
| |
| &flexcan2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1_lpsr>; |
| dr_mode = "otg"; |
| vbus-supply = <®_usbotg_vbus>; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg2>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; |
| no-1-8-v; |
| wakeup-source; |
| keep-power-in-suspend; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| bus-width = <4>; |
| no-1-8-v; |
| non-removable; |
| vmmc-supply = <®_wifi>; |
| wakeup-source; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; |
| assigned-clock-rates = <400000000>; |
| max-frequency = <200000000>; |
| bus-width = <8>; |
| fsl,tuning-step = <1>; |
| non-removable; |
| cap-mmc-highspeed; |
| cap-mmc-hw-reset; |
| mmc-hs200-1_8v; |
| mmc-ddr-1_8v; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x04 |
| MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x04 |
| MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x04 |
| MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x04 |
| >; |
| }; |
| |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5 |
| MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x5 |
| MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x5 |
| MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5 |
| MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5 |
| MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5 |
| MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5 |
| MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5 |
| MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5 |
| MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5 |
| MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x5 |
| MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x5 |
| MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x7 |
| MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x7 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5 |
| MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x5 |
| MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x5 |
| MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x5 |
| MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x5 |
| MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x5 |
| MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x5 |
| MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x5 |
| MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x5 |
| MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x5 |
| MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5 |
| MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x5 |
| MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x08 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000004 |
| MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000004 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0b0b0 |
| MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x0b0b0 |
| MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_lte_on: lteongrp { |
| fsl,pins = < |
| MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x17059 |
| >; |
| }; |
| |
| pinctrl_lte_nreset: ltenresetgrp { |
| fsl,pins = < |
| MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x17059 |
| >; |
| }; |
| |
| pinctrl_rfkill: rfkillrp { |
| fsl,pins = < |
| MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x17059 |
| >; |
| }; |
| |
| pinctrl_rtc_int: rtcintgrp { |
| fsl,pins = < |
| MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x17059 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74 |
| MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x7c |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x7c |
| MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x74 |
| >; |
| }; |
| |
| pinctrl_usbotg1_lpsr: usbotg1 { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x04 |
| >; |
| }; |
| |
| pinctrl_usbotg1_pwr: usbotg1-pwr { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x04 |
| >; |
| }; |
| |
| pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04 |
| >; |
| }; |
| |
| pinctrl_usbotg2: usbotg2grp { |
| fsl,pins = < |
| MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 |
| MX7D_PAD_SD1_CMD__SD1_CMD 0x59 |
| MX7D_PAD_SD1_CLK__SD1_CLK 0x19 |
| MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 |
| MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 |
| MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 |
| MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX7D_PAD_SD2_CLK__SD2_CLK 0x19 |
| MX7D_PAD_SD2_CMD__SD2_CMD 0x59 |
| MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 |
| MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 |
| MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 |
| MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 |
| MX7D_PAD_SD2_CD_B__SD2_CD_B 0x08 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x5d |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x1d |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5d |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5d |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5d |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5d |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5d |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5d |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5d |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5d |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1d |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x5e |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x1e |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5e |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5e |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5e |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5e |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5e |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5e |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5e |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5e |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1e |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x5f |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x0f |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5f |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5f |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5f |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5f |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5f |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5f |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5f |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5f |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f |
| >; |
| }; |
| |
| pinctrl_wifi: wifigrp { |
| fsl,pins = < |
| MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x04 |
| MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x04 |
| >; |
| }; |
| }; |
| |
| &iomuxc_lpsr { |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 |
| >; |
| }; |
| }; |