| /dts-v1/; |
| |
| /* |
| * (Bogus) example FIT image description file demonstrating the usage |
| * of multiple images loaded by the SPL. |
| * Several binaries will be loaded at their respective load addresses. |
| * Finally the one image specifying an entry point will be entered by the SPL. |
| */ |
| |
| / { |
| description = "multiple firmware blobs and U-Boot, loaded by SPL"; |
| #address-cells = <0x1>; |
| |
| images { |
| |
| uboot { |
| description = "U-Boot (64-bit)"; |
| type = "standalone"; |
| arch = "arm64"; |
| compression = "none"; |
| load = <0x4a000000>; |
| }; |
| |
| atf { |
| description = "ARM Trusted Firmware"; |
| type = "firmware"; |
| arch = "arm64"; |
| compression = "none"; |
| load = <0x18000>; |
| entry = <0x18000>; |
| }; |
| |
| mgmt-firmware { |
| description = "arisc management processor firmware"; |
| type = "firmware"; |
| arch = "or1k"; |
| compression = "none"; |
| load = <0x40000>; |
| }; |
| |
| fdt@1 { |
| description = "Pine64+ DT"; |
| type = "flat_dt"; |
| compression = "none"; |
| load = <0x4fa00000>; |
| arch = "arm64"; |
| }; |
| |
| fdt@2 { |
| description = "Pine64 DT"; |
| type = "flat_dt"; |
| compression = "none"; |
| load = <0x4fa00000>; |
| arch = "arm64"; |
| }; |
| |
| kernel { |
| description = "4.7-rc5 kernel"; |
| type = "kernel"; |
| compression = "none"; |
| load = <0x40080000>; |
| arch = "arm64"; |
| }; |
| |
| initrd { |
| description = "Debian installer initrd"; |
| type = "ramdisk"; |
| compression = "none"; |
| load = <0x4fe00000>; |
| arch = "arm64"; |
| }; |
| }; |
| |
| configurations { |
| default = "config@1"; |
| |
| config@1 { |
| description = "sun50i-a64-pine64-plus"; |
| loadables = "uboot", "atf", "kernel", "initrd"; |
| fdt = "fdt@1"; |
| }; |
| |
| config@2 { |
| description = "sun50i-a64-pine64"; |
| loadables = "uboot", "atf", "mgmt-firmware"; |
| fdt = "fdt@2"; |
| }; |
| }; |
| }; |