| /* |
| * (C) Copyright 2017 Rockchip Electronics Co., Ltd |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/pinctrl/rockchip.h> |
| #include <dt-bindings/clock/rk3128-cru.h> |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "rockchip,rk3128"; |
| rockchip,sram = <&sram>; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| gpio0 = &gpio0; |
| gpio1 = &gpio1; |
| gpio2 = &gpio2; |
| gpio3 = &gpio3; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2c3 = &i2c3; |
| spi0 = &spi0; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| mmc0 = &emmc; |
| mmc1 = &sdmmc; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x60000000 0x40000000>; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "rockchip,rk3128-smp"; |
| |
| cpu0:cpu@0x000 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x000>; |
| operating-points = < |
| /* KHz uV */ |
| 816000 1000000 |
| >; |
| #cooling-cells = <2>; /* min followed by max */ |
| clock-latency = <40000>; |
| clocks = <&cru ARMCLK>; |
| }; |
| |
| cpu1:cpu@0x001 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x001>; |
| }; |
| |
| cpu2:cpu@0x002 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x002>; |
| }; |
| |
| cpu3:cpu@0x003 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x003>; |
| }; |
| }; |
| |
| cpu_axi_bus: cpu_axi_bus { |
| compatible = "rockchip,cpu_axi_bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| qos { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| crypto { |
| reg = <0x10128080 0x20>; |
| }; |
| |
| core { |
| reg = <0x1012a000 0x20>; |
| }; |
| |
| peri { |
| reg = <0x1012c000 0x20>; |
| }; |
| |
| gpu { |
| reg = <0x1012d000 0x20>; |
| }; |
| |
| vpu { |
| reg = <0x1012e000 0x20>; |
| }; |
| |
| rga { |
| reg = <0x1012f000 0x20>; |
| }; |
| ebc { |
| reg = <0x1012f080 0x20>; |
| }; |
| |
| iep { |
| reg = <0x1012f100 0x20>; |
| }; |
| |
| lcdc { |
| reg = <0x1012f180 0x20>; |
| rockchip,priority = <3 3>; |
| }; |
| |
| vip { |
| reg = <0x1012f200 0x20>; |
| rockchip,priority = <3 3>; |
| }; |
| }; |
| |
| msch { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| msch@10128000 { |
| reg = <0x10128000 0x20>; |
| rockchip,read-latency = <0x3f>; |
| }; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci"; |
| method = "smc"; |
| cpu_suspend = <0x84000001>; |
| cpu_off = <0x84000002>; |
| cpu_on = <0x84000003>; |
| migrate = <0x84000005>; |
| }; |
| |
| amba { |
| compatible = "arm,amba-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| pdma: pdma@20078000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x20078000 0x4000>; |
| arm,pl330-broken-no-flushp;//2 |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| clocks = <&cru ACLK_DMAC2>; |
| clock-names = "apb_pclk"; |
| }; |
| }; |
| |
| xin24m: xin24m { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "xin24m"; |
| #clock-cells = <0>; |
| }; |
| |
| xin12m: xin12m { |
| compatible = "fixed-clock"; |
| clocks = <&xin24m>; |
| clock-frequency = <12000000>; |
| clock-output-names = "xin12m"; |
| #clock-cells = <0>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| arm,cpu-registers-not-fw-configured; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| clock-frequency = <24000000>; |
| }; |
| |
| timer@20044000 { |
| compatible = "arm,armv7-timer"; |
| reg = <0x20044000 0xb8>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| rockchip,broadcast = <1>; |
| }; |
| |
| watchdog: wdt@2004c000 { |
| compatible = "rockchip,watch dog"; |
| reg = <0x2004c000 0x100>; |
| clock-names = "pclk_wdt"; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| rockchip,irq = <1>; |
| rockchip,timeout = <60>; |
| rockchip,atboot = <1>; |
| rockchip,debug = <0>; |
| }; |
| |
| reset: reset@20000110 { |
| compatible = "rockchip,reset"; |
| reg = <0x20000110 0x24>; |
| #reset-cells = <1>; |
| }; |
| |
| nandc: nandc@10500000 { |
| compatible = "rockchip,rk-nandc"; |
| reg = <0x10500000 0x4000>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&nandc_ale &nandc_cle &nandc_wrn &nandc_rdn &nandc_rdy &nandc_cs0 &nandc_data>; |
| nandc_id = <0>; |
| clocks = <&cru SCLK_NANDC>, |
| <&cru HCLK_NANDC>, |
| <&cru SRST_NANDC>; |
| clock-names = "clk_nandc", "g_clk_nandc", "hclk_nandc"; |
| }; |
| |
| dmc: dmc@20004000 { |
| u-boot,dm-pre-reloc; |
| compatible = "rockchip,rk3128-dmc", "syscon"; |
| reg = <0x0 0x20004000 0x0 0x1000>; |
| }; |
| |
| cru: clock-controller@20000000 { |
| u-boot,dm-pre-reloc; |
| compatible = "rockchip,rk3128-cru"; |
| reg = <0x20000000 0x1000>; |
| rockchip,grf = <&grf>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| assigned-clocks = <&cru PLL_GPLL>; |
| assigned-clock-rates = <594000000>; |
| }; |
| |
| uart0: serial0@20060000 { |
| compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; |
| reg = <0x20060000 0x100>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; |
| clock-names = "baudclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| dmas = <&pdma 2>, <&pdma 3>; |
| #dma-cells = <2>; |
| }; |
| |
| uart1: serial1@20064000 { |
| compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; |
| reg = <0x20064000 0x100>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; |
| clock-names = "baudclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_xfer>; |
| dmas = <&pdma 4>, <&pdma 5>; |
| #dma-cells = <2>; |
| }; |
| |
| uart2: serial2@20068000 { |
| compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; |
| reg = <0x20068000 0x100>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; |
| clock-names = "baudclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_xfer>; |
| dmas = <&pdma 6>, <&pdma 7>; |
| #dma-cells = <2>; |
| }; |
| |
| saradc: saradc@2006c000 { |
| compatible = "rockchip,saradc"; |
| reg = <0x2006c000 0x100>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| #io-channel-cells = <1>; |
| clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; |
| clock-names = "saradc", "apb_pclk"; |
| resets = <&cru SRST_SARADC>; |
| reset-names = "saradc-apb"; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm0@20050000 { |
| compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x20050000 0x10>; |
| #pwm-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm0_pin>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| }; |
| |
| pwm1: pwm1@20050010 { |
| compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x20050010 0x10>; |
| #pwm-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm1_pin>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| }; |
| |
| pwm2: pwm2@20050020 { |
| compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x20050020 0x10>; |
| #pwm-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm2_pin>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| }; |
| |
| pwm3: pwm3@20050030 { |
| compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x20050030 0x10>; |
| #pwm-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm3_pin>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| }; |
| |
| sram: sram@10080400 { |
| compatible = "rockchip,rk3128-smp-sram", "mmio-sram"; |
| reg = <0x10080400 0x1C00>; |
| map-exec; |
| map-cacheable; |
| }; |
| |
| pmu: syscon@100a0000 { |
| compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd"; |
| reg = <0x100a0000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| gic: interrupt-controller@10139000 { |
| compatible = "arm,gic-400"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| reg = <0x10139000 0x1000>, |
| <0x1013a000 0x1000>, |
| <0x1013c000 0x2000>, |
| <0x1013e000 0x2000>; |
| interrupts = <GIC_PPI 9 0xf04>; |
| }; |
| |
| u2phy: usb2-phy { |
| compatible = "rockchip,rk3128-usb2phy"; |
| reg = <0x017c 0x0c>; |
| rockchip,grf = <&grf>; |
| clocks = <&cru SCLK_OTGPHY0>; |
| clock-names = "phyclk"; |
| #clock-cells = <0>; |
| clock-output-names = "usb480m_phy"; |
| #phy-cells = <1>; |
| status = "disabled"; |
| |
| u2phy_otg: otg-port { |
| #phy-cells = <0>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "otg-bvalid", "otg-id", |
| "linestate"; |
| status = "disabled"; |
| }; |
| |
| u2phy_host: host-port { |
| #phy-cells = <0>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "linestate"; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb_otg: usb@10180000 { |
| compatible = "rockchip,rk3128-usb", "rockchip,rk3288-usb", |
| "snps,dwc2"; |
| reg = <0x10180000 0x40000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "otg"; |
| g-use-dma; |
| hnp-srp-disable; |
| phys = <&u2phy 0>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| usb_host_ehci: usb@101c0000 { |
| compatible = "generic-ehci"; |
| reg = <0x101c0000 0x20000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&u2phy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| usb_host_ohci: usb@101e0000 { |
| compatible = "generic-ohci"; |
| reg = <0x101e0000 0x20000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&u2phy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| sdmmc: dwmmc@10214000 { |
| compatible = "rockchip,rk312x-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x10214000 0x4000>; |
| max-frequency = <150000000>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, |
| <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; |
| fifo-depth = <0x100>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| emmc: dwmmc@1021c000 { |
| u-boot,dm-pre-reloc; |
| compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x1021c000 0x4000>; |
| max-frequency = <150000000>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, |
| <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; |
| bus-width = <8>; |
| default-sample-phase = <158>; |
| num-slots = <1>; |
| fifo-depth = <0x100>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| resets = <&cru SRST_EMMC>; |
| reset-names = "reset"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c0@20072000 { |
| compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; |
| reg = <20072000 0x1000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_xfer>; |
| }; |
| |
| i2c1: i2c1@20056000 { |
| compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x20056000 0x1000>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_xfer>; |
| }; |
| |
| i2c2: i2c2@2005a000 { |
| compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x2005a000 0x1000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_xfer>; |
| }; |
| |
| i2c3: i2c3@2005e000 { |
| compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x2005e000 0x1000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_xfer>; |
| }; |
| |
| spi0: spi@20074000 { |
| compatible = "rockchip,rk3128-spi", "rockchip,rk3288-spi"; |
| reg = <0x20074000 0x1000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_txd_mux0 &spi0_rxd_mux0 &spi0_clk_mux0 &spi0_cs0_mux0 &spi0_cs1_mux0>; |
| rockchip,spi-src-clk = <0>; |
| num-cs = <2>; |
| clocks =<&cru SCLK_SPI>, <&cru PCLK_SPI>; |
| clock-names = "spi","pclk_spi0"; |
| dmas = <&pdma 8>, <&pdma 9>; |
| #dma-cells = <2>; |
| dma-names = "tx", "rx"; |
| }; |
| |
| grf: syscon@20008000 { |
| u-boot,dm-pre-reloc; |
| compatible = "rockchip,rk3128-grf", "syscon"; |
| reg = <0x20008000 0x1000>; |
| }; |
| |
| pinctrl: pinctrl@20008000 { |
| compatible = "rockchip,rk3128-pinctrl"; |
| reg = <0x20008000 0xA8>, |
| <0x200080A8 0x4C>, |
| <0x20008118 0x20>, |
| <0x20008100 0x04>; |
| reg-names = "base", "mux", "pull", "drv"; |
| rockchip,grf = <&grf>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| gpio0: gpio0@2007c000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x2007c000 0x100>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO0>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio1@20080000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20080000 0x100>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio2@20084000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20084000 0x100>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio2@20088000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20088000 0x100>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pcfg_pull_up: pcfg-pull-up { |
| bias-pull-up; |
| }; |
| |
| pcfg_pull_down: pcfg-pull-down { |
| bias-pull-down; |
| }; |
| |
| pcfg_pull_none: pcfg-pull-none { |
| bias-disable; |
| }; |
| |
| emmc { |
| /* |
| * We run eMMC at max speed; bump up drive strength. |
| * We also have external pulls, so disable the internal ones. |
| */ |
| |
| emmc_clk: emmc-clk { |
| rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| emmc_cmd: emmc-cmd { |
| rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| emmc_pwren: emmc-pwren { |
| rockchip,pins = <2 5 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| emmc_bus8: emmc-bus8 { |
| rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>, |
| <1 25 RK_FUNC_2 &pcfg_pull_none>, |
| <1 26 RK_FUNC_2 &pcfg_pull_none>, |
| <1 27 RK_FUNC_2 &pcfg_pull_none>, |
| <1 28 RK_FUNC_2 &pcfg_pull_none>, |
| <1 29 RK_FUNC_2 &pcfg_pull_none>, |
| <1 30 RK_FUNC_2 &pcfg_pull_none>, |
| <1 31 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| nandc{ |
| nandc_ale:nandc-ale { |
| rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| nandc_cle:nandc-cle { |
| rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| nandc_wrn:nandc-wrn { |
| rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| nandc_rdn:nandc-rdn { |
| rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| nandc_rdy:nandc-rdy { |
| rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| nandc_cs0:nandc-cs0 { |
| rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| nandc_data: nandc-data { |
| rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart0 { |
| uart0_xfer: uart0-xfer { |
| rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>, |
| <0 17 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart0_cts: uart0-cts { |
| rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart0_rts: uart0-rts { |
| rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart1 { |
| uart1_xfer: uart1-xfer { |
| rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>, |
| <2 23 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart2 { |
| uart2_xfer: uart2-xfer { |
| rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>, |
| <1 19 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| sdmmc { |
| sdmmc_clk: sdmmc-clk { |
| rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>; |
| }; |
| |
| sdmmc_cmd: sdmmc-cmd { |
| rockchip,pins = <1 RK_PC1 1 &pcfg_pull_up>; |
| }; |
| |
| sdmmc_wp: sdmmc-wp { |
| rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up>; |
| }; |
| |
| sdmmc_pwren: sdmmc-pwren { |
| rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up>; |
| }; |
| |
| sdmmc_bus4: sdmmc-bus4 { |
| rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up>, |
| <1 RK_PC3 1 &pcfg_pull_up>, |
| <1 RK_PC4 1 &pcfg_pull_up>, |
| <1 RK_PC5 1 &pcfg_pull_up>; |
| }; |
| }; |
| |
| pwm0 { |
| pwm0_pin: pwm0-pin { |
| rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm1 { |
| pwm1_pin: pwm1-pin { |
| rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm2 { |
| pwm2_pin: pwm2-pin { |
| rockchip,pins = <0 1 2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm3 { |
| pwm3_pin: pwm3-pin { |
| rockchip,pins = <0 27 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c0 { |
| i2c0_xfer: i2c0-xfer { |
| rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, |
| <0 1 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c1 { |
| i2c1_xfer: i2c1-xfer { |
| rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, |
| <0 3 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c2 { |
| i2c2_xfer: i2c2-xfer { |
| rockchip,pins = <2 20 3 &pcfg_pull_none>, |
| <2 21 3 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c3 { |
| i2c3_xfer: i2c3-xfer { |
| rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, |
| <0 7 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| spi0 { |
| spi0_txd_mux0:spi0-txd-mux0 { |
| rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| spi0_rxd_mux0:spi0-rxd-mux0 { |
| rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| spi0_clk_mux0:spi0-clk-mux0 { |
| rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| spi0_cs0_mux0:spi0-cs0-mux0 { |
| rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| spi0_cs1_mux0:spi0-cs1-mux0 { |
| rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| }; |
| }; |