blob: b77506df832f5359337badad30194bbe502dbc45 [file] [log] [blame]
/*
* boot-common.c
*
* Common bootmode functions for omap based boards
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ahci.h>
#include <spl.h>
#include <asm/omap_common.h>
#include <asm/arch/omap.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
#include <scsi.h>
#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
__weak u32 omap_sys_boot_device(void)
{
return BOOT_DEVICE_NONE;
}
void save_omap_boot_params(void)
{
u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
struct omap_boot_parameters *omap_boot_params;
int sys_boot_device = 0;
u32 boot_device;
u32 boot_mode;
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
omap_boot_params = (struct omap_boot_parameters *)boot_params;
boot_device = omap_boot_params->boot_device;
boot_mode = MMCSD_MODE_UNDEFINED;
/* Boot device */
#ifdef BOOT_DEVICE_NAND_I2C
/*
* Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
* Otherwise the SPL boot IF can't handle this device correctly.
* Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
* Draco leads to this boot-device passed to SPL from the BootROM.
*/
if (boot_device == BOOT_DEVICE_NAND_I2C)
boot_device = BOOT_DEVICE_NAND;
#endif
#ifdef BOOT_DEVICE_QSPI_4
/*
* We get different values for QSPI_1 and QSPI_4 being used, but
* don't actually care about this difference. Rather than
* mangle the later code, if we're coming in as QSPI_4 just
* change to the QSPI_1 value.
*/
if (boot_device == BOOT_DEVICE_QSPI_4)
boot_device = BOOT_DEVICE_SPI;
#endif
#ifdef CONFIG_TI816X
/*
* On PG2.0 and later TI816x the values we get when booting are not the
* same as on PG1.0, which is what the defines are based on. Update
* them as needed.
*/
if (get_cpu_rev() != 1) {
if (boot_device == 0x05) {
omap_boot_params->boot_device = BOOT_DEVICE_NAND;
boot_device = BOOT_DEVICE_NAND;
}
if (boot_device == 0x08) {
omap_boot_params->boot_device = BOOT_DEVICE_MMC1;
boot_device = BOOT_DEVICE_MMC1;
}
}
#endif
/*
* When booting from peripheral booting, the boot device is not usable
* as-is (unless there is support for it), so the boot device is instead
* figured out using the SYS_BOOT pins.
*/
switch (boot_device) {
#if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT)
case BOOT_DEVICE_UART:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT)
case BOOT_DEVICE_USB:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USBETH_SUPPORT)
case BOOT_DEVICE_USBETH:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH_SUPPORT)
case BOOT_DEVICE_CPGMAC:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT)
case BOOT_DEVICE_DFU:
sys_boot_device = 1;
break;
#endif
}
if (sys_boot_device) {
boot_device = omap_sys_boot_device();
/* MMC raw mode will fallback to FS mode. */
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END))
boot_mode = MMCSD_MODE_RAW;
}
gd->arch.omap_boot_device = boot_device;
/* Boot mode */
#ifdef CONFIG_OMAP34XX
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
switch (boot_device) {
case BOOT_DEVICE_MMC1:
boot_mode = MMCSD_MODE_FS;
break;
case BOOT_DEVICE_MMC2:
boot_mode = MMCSD_MODE_RAW;
break;
}
}
#else
/*
* If the boot device was dynamically changed and doesn't match what
* the bootrom initially booted, we cannot use the boot device
* descriptor to figure out the boot mode.
*/
if ((boot_device == omap_boot_params->boot_device) &&
(boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
boot_params = omap_boot_params->boot_device_descriptor;
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET));
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET));
if (boot_mode != MMCSD_MODE_FS &&
boot_mode != MMCSD_MODE_RAW)
#ifdef CONFIG_SUPPORT_EMMC_BOOT
boot_mode = MMCSD_MODE_EMMCBOOT;
#else
boot_mode = MMCSD_MODE_UNDEFINED;
#endif
}
#endif
gd->arch.omap_boot_mode = boot_mode;
#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \
!defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)
/* CH flags */
gd->arch.omap_ch_flags = omap_boot_params->ch_flags;
#endif
}
#ifdef CONFIG_SPL_BUILD
u32 spl_boot_device(void)
{
return gd->arch.omap_boot_device;
}
u32 spl_boot_mode(const u32 boot_device)
{
return gd->arch.omap_boot_mode;
}
void spl_board_init(void)
{
/*
* Save the boot parameters passed from romcode.
* We cannot delay the saving further than this,
* to prevent overwrites.
*/
save_omap_boot_params();
/* Prepare console output */
preloader_console_init();
#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
gpmc_init();
#endif
#ifdef CONFIG_SPL_I2C_SUPPORT
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
#endif
#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
arch_misc_init();
#endif
#if defined(CONFIG_HW_WATCHDOG)
hw_watchdog_init();
#endif
#ifdef CONFIG_AM33XX
am33xx_spl_board_init();
#endif
}
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_noargs_t)(u32 *);
image_entry_noargs_t image_entry =
(image_entry_noargs_t) spl_image->entry_point;
u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
debug("image entry point: 0x%lX\n", spl_image->entry_point);
/* Pass the saved boot_params from rom code */
image_entry((u32 *)boot_params);
}
#endif
#ifdef CONFIG_SCSI_AHCI_PLAT
void arch_preboot_os(void)
{
ahci_reset((void __iomem *)DWC_AHSATA_BASE);
}
#endif
#if defined(CONFIG_USB_FUNCTION_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE)
int fb_set_reboot_flag(void)
{
printf("Setting reboot to fastboot flag ...\n");
setenv("dofastboot", "1");
saveenv();
return 0;
}
#endif