| /* |
| * (C) Copyright 2011 |
| * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com |
| * |
| * (C) Copyright 2015 |
| * Kamil Lulko, <rev13@wp.pl> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/errno.h> |
| #include <asm/arch/stm32.h> |
| #include <asm/arch/gpio.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define STM32_GPIOA_BASE (STM32_AHB1PERIPH_BASE + 0x0000) |
| #define STM32_GPIOB_BASE (STM32_AHB1PERIPH_BASE + 0x0400) |
| #define STM32_GPIOC_BASE (STM32_AHB1PERIPH_BASE + 0x0800) |
| #define STM32_GPIOD_BASE (STM32_AHB1PERIPH_BASE + 0x0C00) |
| #define STM32_GPIOE_BASE (STM32_AHB1PERIPH_BASE + 0x1000) |
| #define STM32_GPIOF_BASE (STM32_AHB1PERIPH_BASE + 0x1400) |
| #define STM32_GPIOG_BASE (STM32_AHB1PERIPH_BASE + 0x1800) |
| #define STM32_GPIOH_BASE (STM32_AHB1PERIPH_BASE + 0x1C00) |
| #define STM32_GPIOI_BASE (STM32_AHB1PERIPH_BASE + 0x2000) |
| |
| static const unsigned long io_base[] = { |
| STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE, |
| STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE, |
| STM32_GPIOG_BASE, STM32_GPIOH_BASE, STM32_GPIOI_BASE |
| }; |
| |
| struct stm32_gpio_regs { |
| u32 moder; /* GPIO port mode */ |
| u32 otyper; /* GPIO port output type */ |
| u32 ospeedr; /* GPIO port output speed */ |
| u32 pupdr; /* GPIO port pull-up/pull-down */ |
| u32 idr; /* GPIO port input data */ |
| u32 odr; /* GPIO port output data */ |
| u32 bsrr; /* GPIO port bit set/reset */ |
| u32 lckr; /* GPIO port configuration lock */ |
| u32 afr[2]; /* GPIO alternate function */ |
| }; |
| |
| #define CHECK_DSC(x) (!x || x->port > 8 || x->pin > 15) |
| #define CHECK_CTL(x) (!x || x->af > 15 || x->mode > 3 || x->otype > 1 || \ |
| x->pupd > 2 || x->speed > 3) |
| |
| int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, |
| const struct stm32_gpio_ctl *ctl) |
| { |
| struct stm32_gpio_regs *gpio_regs; |
| u32 i; |
| int rv; |
| |
| if (CHECK_DSC(dsc)) { |
| rv = -EINVAL; |
| goto out; |
| } |
| if (CHECK_CTL(ctl)) { |
| rv = -EINVAL; |
| goto out; |
| } |
| |
| gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| |
| setbits_le32(&STM32_RCC->ahb1enr, 1 << dsc->port); |
| |
| i = (dsc->pin & 0x07) * 4; |
| clrbits_le32(&gpio_regs->afr[dsc->pin >> 3], (0xF << i)); |
| setbits_le32(&gpio_regs->afr[dsc->pin >> 3], ctl->af << i); |
| |
| i = dsc->pin * 2; |
| |
| clrbits_le32(&gpio_regs->moder, (0x3 << i)); |
| setbits_le32(&gpio_regs->moder, ctl->mode << i); |
| |
| clrbits_le32(&gpio_regs->otyper, (0x3 << i)); |
| setbits_le32(&gpio_regs->otyper, ctl->otype << i); |
| |
| clrbits_le32(&gpio_regs->ospeedr, (0x3 << i)); |
| setbits_le32(&gpio_regs->ospeedr, ctl->speed << i); |
| |
| clrbits_le32(&gpio_regs->pupdr, (0x3 << i)); |
| setbits_le32(&gpio_regs->pupdr, ctl->pupd << i); |
| |
| rv = 0; |
| out: |
| return rv; |
| } |
| |
| int stm32_gpout_set(const struct stm32_gpio_dsc *dsc, int state) |
| { |
| struct stm32_gpio_regs *gpio_regs; |
| int rv; |
| |
| if (CHECK_DSC(dsc)) { |
| rv = -EINVAL; |
| goto out; |
| } |
| |
| gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| |
| if (state) |
| writel(1 << dsc->pin, &gpio_regs->bsrr); |
| else |
| writel(1 << (dsc->pin + 16), &gpio_regs->bsrr); |
| |
| rv = 0; |
| out: |
| return rv; |
| } |
| |
| int stm32_gpin_get(const struct stm32_gpio_dsc *dsc) |
| { |
| struct stm32_gpio_regs *gpio_regs; |
| int rv; |
| |
| if (CHECK_DSC(dsc)) { |
| rv = -EINVAL; |
| goto out; |
| } |
| |
| gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; |
| rv = readl(&gpio_regs->idr) & (1 << dsc->pin); |
| out: |
| return rv; |
| } |
| |
| /* Common GPIO API */ |
| |
| int gpio_request(unsigned gpio, const char *label) |
| { |
| return 0; |
| } |
| |
| int gpio_free(unsigned gpio) |
| { |
| return 0; |
| } |
| |
| int gpio_direction_input(unsigned gpio) |
| { |
| struct stm32_gpio_dsc dsc; |
| struct stm32_gpio_ctl ctl; |
| |
| dsc.port = stm32_gpio_to_port(gpio); |
| dsc.pin = stm32_gpio_to_pin(gpio); |
| ctl.af = STM32_GPIO_AF0; |
| ctl.mode = STM32_GPIO_MODE_IN; |
| ctl.pupd = STM32_GPIO_PUPD_NO; |
| ctl.speed = STM32_GPIO_SPEED_50M; |
| |
| return stm32_gpio_config(&dsc, &ctl); |
| } |
| |
| int gpio_direction_output(unsigned gpio, int value) |
| { |
| struct stm32_gpio_dsc dsc; |
| struct stm32_gpio_ctl ctl; |
| int res; |
| |
| dsc.port = stm32_gpio_to_port(gpio); |
| dsc.pin = stm32_gpio_to_pin(gpio); |
| ctl.af = STM32_GPIO_AF0; |
| ctl.mode = STM32_GPIO_MODE_OUT; |
| ctl.otype = STM32_GPIO_OTYPE_PP; |
| ctl.pupd = STM32_GPIO_PUPD_NO; |
| ctl.speed = STM32_GPIO_SPEED_50M; |
| |
| res = stm32_gpio_config(&dsc, &ctl); |
| if (res < 0) |
| goto out; |
| res = stm32_gpout_set(&dsc, value); |
| out: |
| return res; |
| } |
| |
| int gpio_get_value(unsigned gpio) |
| { |
| struct stm32_gpio_dsc dsc; |
| |
| dsc.port = stm32_gpio_to_port(gpio); |
| dsc.pin = stm32_gpio_to_pin(gpio); |
| |
| return stm32_gpin_get(&dsc); |
| } |
| |
| int gpio_set_value(unsigned gpio, int value) |
| { |
| struct stm32_gpio_dsc dsc; |
| |
| dsc.port = stm32_gpio_to_port(gpio); |
| dsc.pin = stm32_gpio_to_pin(gpio); |
| |
| return stm32_gpout_set(&dsc, value); |
| } |