blob: dd5eacef52a8701761a14cbd42cc38c82fac696a [file] [log] [blame]
if TARGET_MICROBLAZE_GENERIC
config SYS_BOARD
default "microblaze-generic"
config SYS_VENDOR
default "xilinx"
config SYS_CONFIG_NAME
string "Board configuration name"
default "microblaze-generic"
help
This option contains information about board configuration name.
Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
will be used for board configuration.
config XILINX_MICROBLAZE0_USE_MSR_INSTR
int "USE_MSR_INSTR range (0:1)"
default 0
config XILINX_MICROBLAZE0_USE_PCMP_INSTR
int "USE_PCMP_INSTR range (0:1)"
default 0
config XILINX_MICROBLAZE0_USE_BARREL
int "USE_BARREL range (0:1)"
default 0
config XILINX_MICROBLAZE0_USE_DIV
int "USE_DIV range (0:1)"
default 0
config XILINX_MICROBLAZE0_USE_HW_MUL
int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
default 0
config XILINX_MICROBLAZE0_HW_VER
string "Core version number"
default "7.10.d"
config XILINX_MICROBLAZE0_FPGA_FAMILY
string "Targeted FPGA family"
default "virtex5"
help
This option contains info about the target FPGA architecture
(Zynq-7000, UltraScale+ Kintex, etc) that the MicroBlaze soft core is
implemented on. It corresponds to the C_FAMILY hdl parameter.
config XILINX_MICROBLAZE0_USR_EXCEP
bool "MicroBlaze user exception support"
default y
help
Enable this option in order to install the user exception handler
(_exception_handler routine from arch/microblaze/cpu/exception.c) in
the exception vector table. The user exception vector is located at
C_BASE_VECTORS + 0x8 address.
config XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP
bool "MicroBlaze delay slot exception support"
default y
help
Enable this option if the MicroBlaze processor supports exceptions
caused by delay slot instructions (processor version >= v5.00). When
enabled, the hw exception handler will print a message indicating
whether the exception was triggered by a delay slot instruction.
config XILINX_MICROBLAZE0_VECTOR_BASE_ADDR
hex "Location of MicroBlaze vectors"
default 0x0
help
Memory address location of the exception vector table. It is
configurable via the C_BASE_VECTORS hdl parameter.
config XILINX_MICROBLAZE0_USE_WDC
bool "MicroBlaze wdc instruction support"
default y
help
Enable this option if the MicroBlaze processor is configured with
support for the "wdc" (Write to Data Cache) instruction.
config SPL_XILINX_MICROBLAZE0_USE_WDC
bool
default XILINX_MICROBLAZE0_USE_WDC
config XILINX_MICROBLAZE0_USE_WIC
bool "MicroBlaze wic instruction support"
default y
help
Enable this option if the MicroBlaze processor is configured with
support for the "wic" (Write to Instruction Cache) instruction.
config SPL_XILINX_MICROBLAZE0_USE_WIC
bool
default XILINX_MICROBLAZE0_USE_WIC
config XILINX_MICROBLAZE0_DCACHE_SIZE
int "Default data cache size"
default 32768
help
This fallback size will be used when no dcache info can be found in
the device tree, or when the data cache is flushed very early in the
boot process, before device tree is available.
config XILINX_MICROBLAZE0_ICACHE_SIZE
int "Default instruction cache size"
default 32768
help
This fallback size will be used when no icache info can be found in
the device tree, or when the instruction cache is flushed very early
in the boot process, before device tree is available.
config XILINX_MICROBLAZE0_PVR
bool "MicroBlaze PVR support"
help
Enables helper functions and macros needed to manipulate PVR
(Processor Version Register) data. Currently, only the microblaze
UCLASS_CPU driver makes use of this feature to retrieve CPU info at
runtime.
endif