blob: 1999c87a336059aa6033d860c5d10420a8a4ea7d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Common clock driver for Actions Semi SoCs.
*
* Copyright (C) 2015 Actions Semi Co., Ltd.
* Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/
#include <common.h>
#include <dm.h>
#include "clk_owl.h"
#include <asm/io.h>
#if defined(CONFIG_MACH_S900)
#include <asm/arch-owl/regs_s900.h>
#include <dt-bindings/clock/actions,s900-cmu.h>
#elif defined(CONFIG_MACH_S700)
#include <asm/arch-owl/regs_s700.h>
#include <dt-bindings/clock/actions,s700-cmu.h>
#endif
#include <linux/bitops.h>
#include <linux/delay.h>
void owl_clk_init(struct owl_clk_priv *priv)
{
u32 bus_clk = 0, core_pll, dev_pll;
#if defined(CONFIG_MACH_S900)
/* Enable ASSIST_PLL */
setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
udelay(PLL_STABILITY_WAIT_US);
#endif
/* Source HOSC to DEV_CLK */
clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
/* Configure BUS_CLK */
bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
writel(bus_clk, priv->base + CMU_BUSCLK);
udelay(PLL_STABILITY_WAIT_US);
/* Configure CORE_PLL */
core_pll = readl(priv->base + CMU_COREPLL);
core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
writel(core_pll, priv->base + CMU_COREPLL);
udelay(PLL_STABILITY_WAIT_US);
/* Configure DEV_PLL */
dev_pll = readl(priv->base + CMU_DEVPLL);
dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
writel(dev_pll, priv->base + CMU_DEVPLL);
udelay(PLL_STABILITY_WAIT_US);
/* Source CORE_PLL for CORE_CLK */
clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
CMU_CORECLK_CPLL);
/* Source DEV_PLL for DEV_CLK */
setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
udelay(PLL_STABILITY_WAIT_US);
}
int owl_clk_enable(struct clk *clk)
{
struct owl_clk_priv *priv = dev_get_priv(clk->dev);
enum owl_soc model = dev_get_driver_data(clk->dev);
switch (clk->id) {
case CLK_UART5:
if (model != S900)
return -EINVAL;
/* Source HOSC for UART5 interface */
clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
/* Enable UART5 interface clock */
setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
break;
case CLK_UART3:
if (model != S700)
return -EINVAL;
/* Source HOSC for UART3 interface */
clrbits_le32(priv->base + CMU_UART3CLK, CMU_UARTCLK_SRC_DEVPLL);
/* Enable UART3 interface clock */
setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
break;
case CLK_RMII_REF:
case CLK_ETHERNET:
setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH);
setbits_le32(priv->base + CMU_ETHERNETPLL, 5);
break;
default:
return -EINVAL;
}
return 0;
}
int owl_clk_disable(struct clk *clk)
{
struct owl_clk_priv *priv = dev_get_priv(clk->dev);
enum owl_soc model = dev_get_driver_data(clk->dev);
switch (clk->id) {
case CLK_UART5:
if (model != S900)
return -EINVAL;
/* Disable UART5 interface clock */
clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
break;
case CLK_UART3:
if (model != S700)
return -EINVAL;
/* Disable UART3 interface clock */
clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
break;
case CLK_RMII_REF:
case CLK_ETHERNET:
clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH);
break;
default:
return -EINVAL;
}
return 0;
}
static int owl_clk_probe(struct udevice *dev)
{
struct owl_clk_priv *priv = dev_get_priv(dev);
priv->base = dev_read_addr(dev);
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
/* setup necessary clocks */
owl_clk_init(priv);
return 0;
}
static const struct clk_ops owl_clk_ops = {
.enable = owl_clk_enable,
.disable = owl_clk_disable,
};
static const struct udevice_id owl_clk_ids[] = {
#if defined(CONFIG_MACH_S900)
{ .compatible = "actions,s900-cmu", .data = S900 },
#elif defined(CONFIG_MACH_S700)
{ .compatible = "actions,s700-cmu", .data = S700 },
#endif
{ }
};
U_BOOT_DRIVER(clk_owl) = {
.name = "clk_owl",
.id = UCLASS_CLK,
.of_match = owl_clk_ids,
.ops = &owl_clk_ops,
.priv_auto_alloc_size = sizeof(struct owl_clk_priv),
.probe = owl_clk_probe,
};