| /* |
| * Keystone2: DDR3 initialization |
| * |
| * (C) Copyright 2012-2014 |
| * Texas Instruments Incorporated, <www.ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/io.h> |
| #include <i2c.h> |
| |
| /************************* *****************************/ |
| static struct ddr3_phy_config ddr3phy_1600_64A = { |
| .pllcr = 0x0001C000ul, |
| .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), |
| .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), |
| .ptr0 = 0x42C21590ul, |
| .ptr1 = 0xD05612C0ul, |
| .ptr2 = 0, /* not set in gel */ |
| .ptr3 = 0x0D861A80ul, |
| .ptr4 = 0x0C827100ul, |
| .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), |
| .dcr_val = ((1 << 10) | (1 << 27)), |
| .dtpr0 = 0xA19DBB66ul, |
| .dtpr1 = 0x12868300ul, |
| .dtpr2 = 0x50035200ul, |
| .mr0 = 0x00001C70ul, |
| .mr1 = 0x00000006ul, |
| .mr2 = 0x00000018ul, |
| .dtcr = 0x730035C7ul, |
| .pgcr2 = 0x00F07A12ul, |
| .zq0cr1 = 0x0000005Dul, |
| .zq1cr1 = 0x0000005Bul, |
| .zq2cr1 = 0x0000005Bul, |
| .pir_v1 = 0x00000033ul, |
| .pir_v2 = 0x0000FF81ul, |
| }; |
| |
| static struct ddr3_emif_config ddr3_1600_64 = { |
| .sdcfg = 0x6200CE6aul, |
| .sdtim1 = 0x16709C55ul, |
| .sdtim2 = 0x00001D4Aul, |
| .sdtim3 = 0x435DFF54ul, |
| .sdtim4 = 0x553F0CFFul, |
| .zqcfg = 0xF0073200ul, |
| .sdrfc = 0x00001869ul, |
| }; |
| |
| static struct ddr3_phy_config ddr3phy_1600_32 = { |
| .pllcr = 0x0001C000ul, |
| .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), |
| .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), |
| .ptr0 = 0x42C21590ul, |
| .ptr1 = 0xD05612C0ul, |
| .ptr2 = 0, /* not set in gel */ |
| .ptr3 = 0x0D861A80ul, |
| .ptr4 = 0x0C827100ul, |
| .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), |
| .dcr_val = ((1 << 10) | (1 << 27)), |
| .dtpr0 = 0xA19DBB66ul, |
| .dtpr1 = 0x12868300ul, |
| .dtpr2 = 0x50035200ul, |
| .mr0 = 0x00001C70ul, |
| .mr1 = 0x00000006ul, |
| .mr2 = 0x00000018ul, |
| .dtcr = 0x730035C7ul, |
| .pgcr2 = 0x00F07A12ul, |
| .zq0cr1 = 0x0000005Dul, |
| .zq1cr1 = 0x0000005Bul, |
| .zq2cr1 = 0x0000005Bul, |
| .pir_v1 = 0x00000033ul, |
| .pir_v2 = 0x0000FF81ul, |
| }; |
| |
| static struct ddr3_emif_config ddr3_1600_32 = { |
| .sdcfg = 0x6200DE6aul, |
| .sdtim1 = 0x16709C55ul, |
| .sdtim2 = 0x00001D4Aul, |
| .sdtim3 = 0x435DFF54ul, |
| .sdtim4 = 0x553F0CFFul, |
| .zqcfg = 0x70073200ul, |
| .sdrfc = 0x00001869ul, |
| }; |
| |
| /************************* *****************************/ |
| static struct ddr3_phy_config ddr3phy_1333_64A = { |
| .pllcr = 0x0005C000ul, |
| .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), |
| .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), |
| .ptr0 = 0x42C21590ul, |
| .ptr1 = 0xD05612C0ul, |
| .ptr2 = 0, /* not set in gel */ |
| .ptr3 = 0x0B4515C2ul, |
| .ptr4 = 0x0A6E08B4ul, |
| .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | |
| NOSRA_MASK | UDIMM_MASK), |
| .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), |
| .dtpr0 = 0x8558AA55ul, |
| .dtpr1 = 0x12857280ul, |
| .dtpr2 = 0x5002C200ul, |
| .mr0 = 0x00001A60ul, |
| .mr1 = 0x00000006ul, |
| .mr2 = 0x00000010ul, |
| .dtcr = 0x710035C7ul, |
| .pgcr2 = 0x00F065B8ul, |
| .zq0cr1 = 0x0000005Dul, |
| .zq1cr1 = 0x0000005Bul, |
| .zq2cr1 = 0x0000005Bul, |
| .pir_v1 = 0x00000033ul, |
| .pir_v2 = 0x0000FF81ul, |
| }; |
| |
| static struct ddr3_emif_config ddr3_1333_64 = { |
| .sdcfg = 0x62008C62ul, |
| .sdtim1 = 0x125C8044ul, |
| .sdtim2 = 0x00001D29ul, |
| .sdtim3 = 0x32CDFF43ul, |
| .sdtim4 = 0x543F0ADFul, |
| .zqcfg = 0xF0073200ul, |
| .sdrfc = 0x00001457ul, |
| }; |
| |
| static struct ddr3_phy_config ddr3phy_1333_32 = { |
| .pllcr = 0x0005C000ul, |
| .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), |
| .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), |
| .ptr0 = 0x42C21590ul, |
| .ptr1 = 0xD05612C0ul, |
| .ptr2 = 0, /* not set in gel */ |
| .ptr3 = 0x0B4515C2ul, |
| .ptr4 = 0x0A6E08B4ul, |
| .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | |
| NOSRA_MASK | UDIMM_MASK), |
| .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), |
| .dtpr0 = 0x8558AA55ul, |
| .dtpr1 = 0x12857280ul, |
| .dtpr2 = 0x5002C200ul, |
| .mr0 = 0x00001A60ul, |
| .mr1 = 0x00000006ul, |
| .mr2 = 0x00000010ul, |
| .dtcr = 0x710035C7ul, |
| .pgcr2 = 0x00F065B8ul, |
| .zq0cr1 = 0x0000005Dul, |
| .zq1cr1 = 0x0000005Bul, |
| .zq2cr1 = 0x0000005Bul, |
| .pir_v1 = 0x00000033ul, |
| .pir_v2 = 0x0000FF81ul, |
| }; |
| |
| static struct ddr3_emif_config ddr3_1333_32 = { |
| .sdcfg = 0x62009C62ul, |
| .sdtim1 = 0x125C8044ul, |
| .sdtim2 = 0x00001D29ul, |
| .sdtim3 = 0x32CDFF43ul, |
| .sdtim4 = 0x543F0ADFul, |
| .zqcfg = 0xf0073200ul, |
| .sdrfc = 0x00001457ul, |
| }; |
| |
| /************************* *****************************/ |
| static struct ddr3_phy_config ddr3phy_1333_64 = { |
| .pllcr = 0x0005C000ul, |
| .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), |
| .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), |
| .ptr0 = 0x42C21590ul, |
| .ptr1 = 0xD05612C0ul, |
| .ptr2 = 0, /* not set in gel */ |
| .ptr3 = 0x0B4515C2ul, |
| .ptr4 = 0x0A6E08B4ul, |
| .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), |
| .dcr_val = ((1 << 10) | (1 << 27)), |
| .dtpr0 = 0x8558AA55ul, |
| .dtpr1 = 0x12857280ul, |
| .dtpr2 = 0x5002C200ul, |
| .mr0 = 0x00001A60ul, |
| .mr1 = 0x00000006ul, |
| .mr2 = 0x00000010ul, |
| .dtcr = 0x710035C7ul, |
| .pgcr2 = 0x00F065B8ul, |
| .zq0cr1 = 0x0000005Dul, |
| .zq1cr1 = 0x0000005Bul, |
| .zq2cr1 = 0x0000005Bul, |
| .pir_v1 = 0x00000033ul, |
| .pir_v2 = 0x0000FF81ul, |
| }; |
| /******************************************************/ |
| int get_dimm_params(char *dimm_name) |
| { |
| u8 spd_params[256]; |
| int ret; |
| int old_bus; |
| |
| i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); |
| |
| old_bus = i2c_get_bus_num(); |
| i2c_set_bus_num(1); |
| |
| ret = i2c_read(0x53, 0, 1, spd_params, 256); |
| |
| i2c_set_bus_num(old_bus); |
| |
| dimm_name[0] = '\0'; |
| |
| if (ret) { |
| puts("Cannot read DIMM params\n"); |
| return 1; |
| } |
| |
| /* |
| * We need to convert spd data to dimm parameters |
| * and to DDR3 EMIF and PHY regirsters values. |
| * For now we just return DIMM type string value. |
| * Caller may use this value to choose appropriate |
| * a pre-set DDR3 configuration |
| */ |
| |
| strncpy(dimm_name, (char *)&spd_params[0x80], 18); |
| dimm_name[18] = '\0'; |
| |
| return 0; |
| } |
| |
| struct pll_init_data ddr3a_333 = DDR3_PLL_333(A); |
| struct pll_init_data ddr3b_333 = DDR3_PLL_333(B); |
| struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); |
| struct pll_init_data ddr3b_400 = DDR3_PLL_400(B); |
| |
| void init_ddr3(void) |
| { |
| char dimm_name[32]; |
| |
| get_dimm_params(dimm_name); |
| |
| printf("Detected SO-DIMM [%s]\n", dimm_name); |
| |
| if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { |
| init_pll(&ddr3a_400); |
| if (cpu_revision() > 0) { |
| init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_64A); |
| init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_64); |
| printf("DRAM: Capacity 8 GiB (includes reported below)\n"); |
| } else { |
| init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_32); |
| init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_32); |
| printf("DRAM: Capacity 4 GiB (includes reported below)\n"); |
| } |
| } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { |
| init_pll(&ddr3a_333); |
| if (cpu_revision() > 0) { |
| init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_64A); |
| init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_64); |
| } else { |
| init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_32); |
| init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_32); |
| } |
| } else { |
| printf("Unknown SO-DIMM. Cannot configure DDR3\n"); |
| while (1) |
| ; |
| } |
| |
| init_pll(&ddr3b_333); |
| init_ddrphy(K2HK_DDR3B_DDRPHYC, &ddr3phy_1333_64); |
| init_ddremif(K2HK_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); |
| } |