| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2020 Sartura Ltd. |
| * |
| * Author: Robert Marko <robert.marko@sartura.hr> |
| * |
| * Based on Linux driver |
| */ |
| |
| #include <asm/io.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <dt-bindings/reset/qcom,ipq4019-reset.h> |
| #include <reset-uclass.h> |
| #include <linux/bitops.h> |
| #include <malloc.h> |
| |
| struct ipq4019_reset_priv { |
| phys_addr_t base; |
| }; |
| |
| struct qcom_reset_map { |
| unsigned int reg; |
| u8 bit; |
| }; |
| |
| static const struct qcom_reset_map gcc_ipq4019_resets[] = { |
| [WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 }, |
| [WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 }, |
| [WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 }, |
| [WIFI0_RADIO_COLD_RESET] = { 0x1f008, 2 }, |
| [WIFI0_CORE_WARM_RESET] = { 0x1f008, 1 }, |
| [WIFI0_CORE_COLD_RESET] = { 0x1f008, 0 }, |
| [WIFI1_CPU_INIT_RESET] = { 0x20008, 5 }, |
| [WIFI1_RADIO_SRIF_RESET] = { 0x20008, 4 }, |
| [WIFI1_RADIO_WARM_RESET] = { 0x20008, 3 }, |
| [WIFI1_RADIO_COLD_RESET] = { 0x20008, 2 }, |
| [WIFI1_CORE_WARM_RESET] = { 0x20008, 1 }, |
| [WIFI1_CORE_COLD_RESET] = { 0x20008, 0 }, |
| [USB3_UNIPHY_PHY_ARES] = { 0x1e038, 5 }, |
| [USB3_HSPHY_POR_ARES] = { 0x1e038, 4 }, |
| [USB3_HSPHY_S_ARES] = { 0x1e038, 2 }, |
| [USB2_HSPHY_POR_ARES] = { 0x1e01c, 4 }, |
| [USB2_HSPHY_S_ARES] = { 0x1e01c, 2 }, |
| [PCIE_PHY_AHB_ARES] = { 0x1d010, 11 }, |
| [PCIE_AHB_ARES] = { 0x1d010, 10 }, |
| [PCIE_PWR_ARES] = { 0x1d010, 9 }, |
| [PCIE_PIPE_STICKY_ARES] = { 0x1d010, 8 }, |
| [PCIE_AXI_M_STICKY_ARES] = { 0x1d010, 7 }, |
| [PCIE_PHY_ARES] = { 0x1d010, 6 }, |
| [PCIE_PARF_XPU_ARES] = { 0x1d010, 5 }, |
| [PCIE_AXI_S_XPU_ARES] = { 0x1d010, 4 }, |
| [PCIE_AXI_M_VMIDMT_ARES] = { 0x1d010, 3 }, |
| [PCIE_PIPE_ARES] = { 0x1d010, 2 }, |
| [PCIE_AXI_S_ARES] = { 0x1d010, 1 }, |
| [PCIE_AXI_M_ARES] = { 0x1d010, 0 }, |
| [ESS_RESET] = { 0x12008, 0}, |
| [GCC_BLSP1_BCR] = {0x01000, 0}, |
| [GCC_BLSP1_QUP1_BCR] = {0x02000, 0}, |
| [GCC_BLSP1_UART1_BCR] = {0x02038, 0}, |
| [GCC_BLSP1_QUP2_BCR] = {0x03008, 0}, |
| [GCC_BLSP1_UART2_BCR] = {0x03028, 0}, |
| [GCC_BIMC_BCR] = {0x04000, 0}, |
| [GCC_TLMM_BCR] = {0x05000, 0}, |
| [GCC_IMEM_BCR] = {0x0E000, 0}, |
| [GCC_ESS_BCR] = {0x12008, 0}, |
| [GCC_PRNG_BCR] = {0x13000, 0}, |
| [GCC_BOOT_ROM_BCR] = {0x13008, 0}, |
| [GCC_CRYPTO_BCR] = {0x16000, 0}, |
| [GCC_SDCC1_BCR] = {0x18000, 0}, |
| [GCC_SEC_CTRL_BCR] = {0x1A000, 0}, |
| [GCC_AUDIO_BCR] = {0x1B008, 0}, |
| [GCC_QPIC_BCR] = {0x1C000, 0}, |
| [GCC_PCIE_BCR] = {0x1D000, 0}, |
| [GCC_USB2_BCR] = {0x1E008, 0}, |
| [GCC_USB2_PHY_BCR] = {0x1E018, 0}, |
| [GCC_USB3_BCR] = {0x1E024, 0}, |
| [GCC_USB3_PHY_BCR] = {0x1E034, 0}, |
| [GCC_SYSTEM_NOC_BCR] = {0x21000, 0}, |
| [GCC_PCNOC_BCR] = {0x2102C, 0}, |
| [GCC_DCD_BCR] = {0x21038, 0}, |
| [GCC_SNOC_BUS_TIMEOUT0_BCR] = {0x21064, 0}, |
| [GCC_SNOC_BUS_TIMEOUT1_BCR] = {0x2106C, 0}, |
| [GCC_SNOC_BUS_TIMEOUT2_BCR] = {0x21074, 0}, |
| [GCC_SNOC_BUS_TIMEOUT3_BCR] = {0x2107C, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT0_BCR] = {0x21084, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT1_BCR] = {0x2108C, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT2_BCR] = {0x21094, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT3_BCR] = {0x2109C, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT4_BCR] = {0x210A4, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT5_BCR] = {0x210AC, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT6_BCR] = {0x210B4, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT7_BCR] = {0x210BC, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT8_BCR] = {0x210C4, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT9_BCR] = {0x210CC, 0}, |
| [GCC_TCSR_BCR] = {0x22000, 0}, |
| [GCC_MPM_BCR] = {0x24000, 0}, |
| [GCC_SPDM_BCR] = {0x25000, 0}, |
| }; |
| |
| static int ipq4019_reset_assert(struct reset_ctl *rst) |
| { |
| struct ipq4019_reset_priv *priv = dev_get_priv(rst->dev); |
| const struct qcom_reset_map *reset_map = gcc_ipq4019_resets; |
| const struct qcom_reset_map *map; |
| u32 value; |
| |
| map = &reset_map[rst->id]; |
| |
| value = readl(priv->base + map->reg); |
| value |= BIT(map->bit); |
| writel(value, priv->base + map->reg); |
| |
| return 0; |
| } |
| |
| static int ipq4019_reset_deassert(struct reset_ctl *rst) |
| { |
| struct ipq4019_reset_priv *priv = dev_get_priv(rst->dev); |
| const struct qcom_reset_map *reset_map = gcc_ipq4019_resets; |
| const struct qcom_reset_map *map; |
| u32 value; |
| |
| map = &reset_map[rst->id]; |
| |
| value = readl(priv->base + map->reg); |
| value &= ~BIT(map->bit); |
| writel(value, priv->base + map->reg); |
| |
| return 0; |
| } |
| |
| static int ipq4019_reset_free(struct reset_ctl *rst) |
| { |
| return 0; |
| } |
| |
| static int ipq4019_reset_request(struct reset_ctl *rst) |
| { |
| return 0; |
| } |
| |
| static const struct reset_ops ipq4019_reset_ops = { |
| .request = ipq4019_reset_request, |
| .rfree = ipq4019_reset_free, |
| .rst_assert = ipq4019_reset_assert, |
| .rst_deassert = ipq4019_reset_deassert, |
| }; |
| |
| static const struct udevice_id ipq4019_reset_ids[] = { |
| { .compatible = "qcom,gcc-reset-ipq4019" }, |
| { } |
| }; |
| |
| static int ipq4019_reset_probe(struct udevice *dev) |
| { |
| struct ipq4019_reset_priv *priv = dev_get_priv(dev); |
| |
| priv->base = dev_read_addr(dev); |
| if (priv->base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(ipq4019_reset) = { |
| .name = "ipq4019_reset", |
| .id = UCLASS_RESET, |
| .of_match = ipq4019_reset_ids, |
| .ops = &ipq4019_reset_ops, |
| .probe = ipq4019_reset_probe, |
| .priv_auto_alloc_size = sizeof(struct ipq4019_reset_priv), |
| }; |