| /* |
| * (C) Copyright 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * This file contains the configuration parameters for qemu-mips64 target. |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define CONFIG_QEMU_MIPS |
| |
| #define CONFIG_MISC_INIT_R |
| |
| #define CONFIG_TIMESTAMP /* Print image info with timestamp */ |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "addmisc=setenv bootargs ${bootargs} " \ |
| "console=ttyS0,${baudrate} " \ |
| "panic=1\0" \ |
| "bootfile=/tftpboot/vmlinux\0" \ |
| "load=tftp ffffffff80500000 ${u-boot}\0" \ |
| "" |
| |
| #define CONFIG_BOOTCOMMAND "bootp;bootelf" |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| /* |
| * Command line configuration. |
| */ |
| |
| #define CONFIG_DRIVER_NE2000 |
| #define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 |
| |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| #define CONFIG_SYS_NS16550_CLK 115200 |
| #define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8 |
| #define CONFIG_CONS_INDEX 1 |
| |
| #ifdef CONFIG_SYS_BIG_ENDIAN |
| #define CONFIG_IDE_SWAP_IO |
| #endif |
| |
| #define CONFIG_SYS_IDE_MAXBUS 2 |
| #define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 |
| #define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 |
| #define CONFIG_SYS_ATA_DATA_OFFSET 0 |
| #define CONFIG_SYS_ATA_REG_OFFSET 0 |
| #define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000 |
| |
| #define CONFIG_SYS_IDE_MAXDEVICE 4 |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| |
| #define CONFIG_AUTO_COMPLETE |
| #define CONFIG_CMDLINE_EDITING |
| |
| #define CONFIG_SYS_MALLOC_LEN (256 << 10) |
| |
| #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 |
| |
| #define CONFIG_SYS_MHZ 132 |
| |
| #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) |
| |
| /* Cached addr */ |
| #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 |
| |
| /* default load address */ |
| #define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000 |
| |
| #define CONFIG_SYS_MEMTEST_START 0xffffffff80100000 |
| #define CONFIG_SYS_MEMTEST_END 0xffffffff80800000 |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| /* The following #defines are needed to get flash environment right */ |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| |
| #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 |
| |
| /* We boot from this flash, selected with dip switch */ |
| #define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000 |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| |
| /* Address and size of Primary Environment Sector */ |
| #define CONFIG_ENV_SIZE 0x8000 |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE) |
| |
| #define CONFIG_ENV_OVERWRITE 1 |
| |
| #define MEM_SIZE 128 |
| |
| #endif /* __CONFIG_H */ |