| #include <common.h> |
| #include <watchdog.h> |
| #ifdef CONFIG_ARCH_SUNXI |
| #include <asm/arch/usb_phy.h> |
| #endif |
| #include <asm/errno.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| |
| #include <usb.h> |
| #include "linux-compat.h" |
| #include "usb-compat.h" |
| #include "musb_core.h" |
| #include "musb_host.h" |
| #include "musb_gadget.h" |
| #include "musb_uboot.h" |
| |
| #ifdef CONFIG_USB_MUSB_HOST |
| struct int_queue { |
| struct usb_host_endpoint hep; |
| struct urb urb; |
| }; |
| |
| #ifndef CONFIG_DM_USB |
| struct musb_host_data musb_host; |
| #endif |
| |
| static void musb_host_complete_urb(struct urb *urb) |
| { |
| urb->dev->status &= ~USB_ST_NOT_PROC; |
| urb->dev->act_len = urb->actual_length; |
| } |
| |
| static void construct_urb(struct urb *urb, struct usb_host_endpoint *hep, |
| struct usb_device *dev, int endpoint_type, |
| unsigned long pipe, void *buffer, int len, |
| struct devrequest *setup, int interval) |
| { |
| int epnum = usb_pipeendpoint(pipe); |
| int is_in = usb_pipein(pipe); |
| |
| memset(urb, 0, sizeof(struct urb)); |
| memset(hep, 0, sizeof(struct usb_host_endpoint)); |
| INIT_LIST_HEAD(&hep->urb_list); |
| INIT_LIST_HEAD(&urb->urb_list); |
| urb->ep = hep; |
| urb->complete = musb_host_complete_urb; |
| urb->status = -EINPROGRESS; |
| urb->dev = dev; |
| urb->pipe = pipe; |
| urb->transfer_buffer = buffer; |
| urb->transfer_dma = (unsigned long)buffer; |
| urb->transfer_buffer_length = len; |
| urb->setup_packet = (unsigned char *)setup; |
| |
| urb->ep->desc.wMaxPacketSize = |
| __cpu_to_le16(is_in ? dev->epmaxpacketin[epnum] : |
| dev->epmaxpacketout[epnum]); |
| urb->ep->desc.bmAttributes = endpoint_type; |
| urb->ep->desc.bEndpointAddress = |
| (is_in ? USB_DIR_IN : USB_DIR_OUT) | epnum; |
| urb->ep->desc.bInterval = interval; |
| } |
| |
| static int submit_urb(struct usb_hcd *hcd, struct urb *urb) |
| { |
| struct musb *host = hcd->hcd_priv; |
| int ret; |
| unsigned long timeout; |
| |
| ret = musb_urb_enqueue(hcd, urb, 0); |
| if (ret < 0) { |
| printf("Failed to enqueue URB to controller\n"); |
| return ret; |
| } |
| |
| timeout = get_timer(0) + USB_TIMEOUT_MS(urb->pipe); |
| do { |
| if (ctrlc()) |
| return -EIO; |
| host->isr(0, host); |
| } while (urb->status == -EINPROGRESS && |
| get_timer(0) < timeout); |
| |
| if (urb->status == -EINPROGRESS) |
| musb_urb_dequeue(hcd, urb, -ETIME); |
| |
| return urb->status; |
| } |
| |
| static int _musb_submit_control_msg(struct musb_host_data *host, |
| struct usb_device *dev, unsigned long pipe, |
| void *buffer, int len, struct devrequest *setup) |
| { |
| construct_urb(&host->urb, &host->hep, dev, USB_ENDPOINT_XFER_CONTROL, |
| pipe, buffer, len, setup, 0); |
| |
| /* Fix speed for non hub-attached devices */ |
| if (!usb_dev_get_parent(dev)) |
| dev->speed = host->host_speed; |
| |
| return submit_urb(&host->hcd, &host->urb); |
| } |
| |
| static int _musb_submit_bulk_msg(struct musb_host_data *host, |
| struct usb_device *dev, unsigned long pipe, void *buffer, int len) |
| { |
| construct_urb(&host->urb, &host->hep, dev, USB_ENDPOINT_XFER_BULK, |
| pipe, buffer, len, NULL, 0); |
| return submit_urb(&host->hcd, &host->urb); |
| } |
| |
| static int _musb_submit_int_msg(struct musb_host_data *host, |
| struct usb_device *dev, unsigned long pipe, |
| void *buffer, int len, int interval) |
| { |
| construct_urb(&host->urb, &host->hep, dev, USB_ENDPOINT_XFER_INT, pipe, |
| buffer, len, NULL, interval); |
| return submit_urb(&host->hcd, &host->urb); |
| } |
| |
| static struct int_queue *_musb_create_int_queue(struct musb_host_data *host, |
| struct usb_device *dev, unsigned long pipe, int queuesize, |
| int elementsize, void *buffer, int interval) |
| { |
| struct int_queue *queue; |
| int ret, index = usb_pipein(pipe) * 16 + usb_pipeendpoint(pipe); |
| |
| if (queuesize != 1) { |
| printf("ERROR musb int-queues only support queuesize 1\n"); |
| return NULL; |
| } |
| |
| if (dev->int_pending & (1 << index)) { |
| printf("ERROR int-urb is already pending on pipe %lx\n", pipe); |
| return NULL; |
| } |
| |
| queue = malloc(sizeof(*queue)); |
| if (!queue) |
| return NULL; |
| |
| construct_urb(&queue->urb, &queue->hep, dev, USB_ENDPOINT_XFER_INT, |
| pipe, buffer, elementsize, NULL, interval); |
| |
| ret = musb_urb_enqueue(&host->hcd, &queue->urb, 0); |
| if (ret < 0) { |
| printf("Failed to enqueue URB to controller\n"); |
| free(queue); |
| return NULL; |
| } |
| |
| dev->int_pending |= 1 << index; |
| return queue; |
| } |
| |
| static int _musb_destroy_int_queue(struct musb_host_data *host, |
| struct usb_device *dev, struct int_queue *queue) |
| { |
| int index = usb_pipein(queue->urb.pipe) * 16 + |
| usb_pipeendpoint(queue->urb.pipe); |
| |
| if (queue->urb.status == -EINPROGRESS) |
| musb_urb_dequeue(&host->hcd, &queue->urb, -ETIME); |
| |
| dev->int_pending &= ~(1 << index); |
| free(queue); |
| return 0; |
| } |
| |
| static void *_musb_poll_int_queue(struct musb_host_data *host, |
| struct usb_device *dev, struct int_queue *queue) |
| { |
| if (queue->urb.status != -EINPROGRESS) |
| return NULL; /* URB has already completed in a prev. poll */ |
| |
| host->host->isr(0, host->host); |
| |
| if (queue->urb.status != -EINPROGRESS) |
| return queue->urb.transfer_buffer; /* Done */ |
| |
| return NULL; /* URB still pending */ |
| } |
| |
| static int _musb_reset_root_port(struct musb_host_data *host, |
| struct usb_device *dev) |
| { |
| void *mbase = host->host->mregs; |
| u8 power; |
| |
| power = musb_readb(mbase, MUSB_POWER); |
| power &= 0xf0; |
| musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power); |
| mdelay(50); |
| #ifdef CONFIG_ARCH_SUNXI |
| /* |
| * sunxi phy has a bug and it will wrongly detect high speed squelch |
| * when clearing reset on low-speed devices, temporary disable |
| * squelch detection to work around this. |
| */ |
| sunxi_usb_phy_enable_squelch_detect(0, 0); |
| #endif |
| power = musb_readb(mbase, MUSB_POWER); |
| musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power); |
| #ifdef CONFIG_ARCH_SUNXI |
| sunxi_usb_phy_enable_squelch_detect(0, 1); |
| #endif |
| host->host->isr(0, host->host); |
| host->host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ? |
| USB_SPEED_HIGH : |
| (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ? |
| USB_SPEED_FULL : USB_SPEED_LOW; |
| mdelay((host->host_speed == USB_SPEED_LOW) ? 200 : 50); |
| |
| return 0; |
| } |
| |
| int musb_lowlevel_init(struct musb_host_data *host) |
| { |
| void *mbase; |
| /* USB spec says it may take up to 1 second for a device to connect */ |
| unsigned long timeout = get_timer(0) + 1000; |
| int ret; |
| |
| if (!host->host) { |
| printf("MUSB host is not registered\n"); |
| return -ENODEV; |
| } |
| |
| ret = musb_start(host->host); |
| if (ret) |
| return ret; |
| |
| mbase = host->host->mregs; |
| do { |
| if (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_HM) |
| break; |
| } while (get_timer(0) < timeout); |
| if (get_timer(0) >= timeout) |
| return -ENODEV; |
| |
| _musb_reset_root_port(host, NULL); |
| host->host->is_active = 1; |
| host->hcd.hcd_priv = host->host; |
| |
| return 0; |
| } |
| |
| #ifndef CONFIG_DM_USB |
| int usb_lowlevel_stop(int index) |
| { |
| if (!musb_host.host) { |
| printf("MUSB host is not registered\n"); |
| return -ENODEV; |
| } |
| |
| musb_stop(musb_host.host); |
| return 0; |
| } |
| |
| int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, |
| void *buffer, int length) |
| { |
| return _musb_submit_bulk_msg(&musb_host, dev, pipe, buffer, length); |
| } |
| |
| int submit_control_msg(struct usb_device *dev, unsigned long pipe, |
| void *buffer, int length, struct devrequest *setup) |
| { |
| return _musb_submit_control_msg(&musb_host, dev, pipe, buffer, length, setup); |
| } |
| |
| int submit_int_msg(struct usb_device *dev, unsigned long pipe, |
| void *buffer, int length, int interval) |
| { |
| return _musb_submit_int_msg(&musb_host, dev, pipe, buffer, length, interval); |
| } |
| |
| struct int_queue *create_int_queue(struct usb_device *dev, |
| unsigned long pipe, int queuesize, int elementsize, |
| void *buffer, int interval) |
| { |
| return _musb_create_int_queue(&musb_host, dev, pipe, queuesize, elementsize, |
| buffer, interval); |
| } |
| |
| void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) |
| { |
| return _musb_poll_int_queue(&musb_host, dev, queue); |
| } |
| |
| int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) |
| { |
| return _musb_destroy_int_queue(&musb_host, dev, queue); |
| } |
| |
| int usb_reset_root_port(struct usb_device *dev) |
| { |
| return _musb_reset_root_port(&musb_host, dev); |
| } |
| |
| int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) |
| { |
| return musb_lowlevel_init(&musb_host); |
| } |
| #endif /* !CONFIG_DM_USB */ |
| |
| #ifdef CONFIG_DM_USB |
| static int musb_submit_control_msg(struct udevice *dev, struct usb_device *udev, |
| unsigned long pipe, void *buffer, int length, |
| struct devrequest *setup) |
| { |
| struct musb_host_data *host = dev_get_priv(dev); |
| return _musb_submit_control_msg(host, udev, pipe, buffer, length, setup); |
| } |
| |
| static int musb_submit_bulk_msg(struct udevice *dev, struct usb_device *udev, |
| unsigned long pipe, void *buffer, int length) |
| { |
| struct musb_host_data *host = dev_get_priv(dev); |
| return _musb_submit_bulk_msg(host, udev, pipe, buffer, length); |
| } |
| |
| static int musb_submit_int_msg(struct udevice *dev, struct usb_device *udev, |
| unsigned long pipe, void *buffer, int length, |
| int interval) |
| { |
| struct musb_host_data *host = dev_get_priv(dev); |
| return _musb_submit_int_msg(host, udev, pipe, buffer, length, interval); |
| } |
| |
| static struct int_queue *musb_create_int_queue(struct udevice *dev, |
| struct usb_device *udev, unsigned long pipe, int queuesize, |
| int elementsize, void *buffer, int interval) |
| { |
| struct musb_host_data *host = dev_get_priv(dev); |
| return _musb_create_int_queue(host, udev, pipe, queuesize, elementsize, |
| buffer, interval); |
| } |
| |
| static void *musb_poll_int_queue(struct udevice *dev, struct usb_device *udev, |
| struct int_queue *queue) |
| { |
| struct musb_host_data *host = dev_get_priv(dev); |
| return _musb_poll_int_queue(host, udev, queue); |
| } |
| |
| static int musb_destroy_int_queue(struct udevice *dev, struct usb_device *udev, |
| struct int_queue *queue) |
| { |
| struct musb_host_data *host = dev_get_priv(dev); |
| return _musb_destroy_int_queue(host, udev, queue); |
| } |
| |
| static int musb_reset_root_port(struct udevice *dev, struct usb_device *udev) |
| { |
| struct musb_host_data *host = dev_get_priv(dev); |
| return _musb_reset_root_port(host, udev); |
| } |
| |
| struct dm_usb_ops musb_usb_ops = { |
| .control = musb_submit_control_msg, |
| .bulk = musb_submit_bulk_msg, |
| .interrupt = musb_submit_int_msg, |
| .create_int_queue = musb_create_int_queue, |
| .poll_int_queue = musb_poll_int_queue, |
| .destroy_int_queue = musb_destroy_int_queue, |
| .reset_root_port = musb_reset_root_port, |
| }; |
| #endif /* CONFIG_DM_USB */ |
| #endif /* CONFIG_USB_MUSB_HOST */ |
| |
| #ifdef CONFIG_USB_MUSB_GADGET |
| static struct musb *gadget; |
| |
| int usb_gadget_handle_interrupts(int index) |
| { |
| WATCHDOG_RESET(); |
| if (!gadget || !gadget->isr) |
| return -EINVAL; |
| |
| return gadget->isr(0, gadget); |
| } |
| |
| int usb_gadget_register_driver(struct usb_gadget_driver *driver) |
| { |
| int ret; |
| |
| if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind || |
| !driver->setup) { |
| printf("bad parameter.\n"); |
| return -EINVAL; |
| } |
| |
| if (!gadget) { |
| printf("Controller uninitialized\n"); |
| return -ENXIO; |
| } |
| |
| ret = musb_gadget_start(&gadget->g, driver); |
| if (ret < 0) { |
| printf("gadget_start failed with %d\n", ret); |
| return ret; |
| } |
| |
| ret = driver->bind(&gadget->g); |
| if (ret < 0) { |
| printf("bind failed with %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) |
| { |
| if (driver->disconnect) |
| driver->disconnect(&gadget->g); |
| if (driver->unbind) |
| driver->unbind(&gadget->g); |
| return 0; |
| } |
| #endif /* CONFIG_USB_MUSB_GADGET */ |
| |
| int musb_register(struct musb_hdrc_platform_data *plat, void *bdata, |
| void *ctl_regs) |
| { |
| struct musb **musbp; |
| |
| switch (plat->mode) { |
| #if defined(CONFIG_USB_MUSB_HOST) && !defined(CONFIG_DM_USB) |
| case MUSB_HOST: |
| musbp = &musb_host.host; |
| break; |
| #endif |
| #ifdef CONFIG_USB_MUSB_GADGET |
| case MUSB_PERIPHERAL: |
| musbp = &gadget; |
| break; |
| #endif |
| default: |
| return -EINVAL; |
| } |
| |
| *musbp = musb_init_controller(plat, (struct device *)bdata, ctl_regs); |
| if (!musbp) { |
| printf("Failed to init the controller\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |