| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2022 Broadcom Ltd. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "brcm,bcm6813", "brcm,bcmbca"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| interrupt-parent = <&gic>; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| B53_0: cpu@0 { |
| compatible = "brcm,brahma-b53"; |
| device_type = "cpu"; |
| reg = <0x0 0x0>; |
| next-level-cache = <&L2_0>; |
| enable-method = "psci"; |
| }; |
| |
| B53_1: cpu@1 { |
| compatible = "brcm,brahma-b53"; |
| device_type = "cpu"; |
| reg = <0x0 0x1>; |
| next-level-cache = <&L2_0>; |
| enable-method = "psci"; |
| }; |
| |
| B53_2: cpu@2 { |
| compatible = "brcm,brahma-b53"; |
| device_type = "cpu"; |
| reg = <0x0 0x2>; |
| next-level-cache = <&L2_0>; |
| enable-method = "psci"; |
| }; |
| |
| B53_3: cpu@3 { |
| compatible = "brcm,brahma-b53"; |
| device_type = "cpu"; |
| reg = <0x0 0x3>; |
| next-level-cache = <&L2_0>; |
| enable-method = "psci"; |
| }; |
| |
| L2_0: l2-cache0 { |
| compatible = "cache"; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu: pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&B53_0>, <&B53_1>, |
| <&B53_2>, <&B53_3>; |
| }; |
| |
| clocks: clocks { |
| periph_clk: periph-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <200000000>; |
| }; |
| uart_clk: uart-clk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| clocks = <&periph_clk>; |
| clock-div = <4>; |
| clock-mult = <1>; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| axi@81000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x81000000 0x8000>; |
| |
| gic: interrupt-controller@1000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| reg = <0x1000 0x1000>, |
| <0x2000 0x2000>, |
| <0x4000 0x2000>, |
| <0x6000 0x2000>; |
| }; |
| }; |
| |
| bus@ff800000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0xff800000 0x800000>; |
| |
| uart0: serial@12000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x12000 0x1000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&uart_clk>, <&uart_clk>; |
| clock-names = "uartclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| }; |
| }; |