| /* |
| * (C) Copyright 2017 Rockchip Electronics Co., Ltd. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <ram.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/periph.h> |
| #include <asm/arch/grf_rk322x.h> |
| #include <asm/arch/boot_mode.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| __weak int rk_board_late_init(void) |
| { |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| setup_boot_mode(); |
| |
| return rk_board_late_init(); |
| } |
| |
| int board_init(void) |
| { |
| #include <asm/arch/grf_rk322x.h> |
| /* Enable early UART2 channel 1 on the RK322x */ |
| #define GRF_BASE 0x11000000 |
| struct rk322x_grf * const grf = (void *)GRF_BASE; |
| |
| rk_clrsetreg(&grf->gpio1b_iomux, |
| GPIO1B1_MASK | GPIO1B2_MASK, |
| GPIO1B2_UART21_SIN << GPIO1B2_SHIFT | |
| GPIO1B1_UART21_SOUT << GPIO1B1_SHIFT); |
| /* Set channel C as UART2 input */ |
| rk_clrsetreg(&grf->con_iomux, |
| CON_IOMUX_UART2SEL_MASK, |
| CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT); |
| |
| /* |
| * The integrated macphy is enabled by default, disable it |
| * for saving power consuming. |
| */ |
| rk_clrsetreg(&grf->macphy_con[0], |
| MACPHY_CFG_ENABLE_MASK, |
| 0 << MACPHY_CFG_ENABLE_SHIFT); |
| |
| return 0; |
| } |
| |
| int dram_init_banksize(void) |
| { |
| gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; |
| gd->bd->bi_dram[0].size = 0x8400000; |
| /* Reserve 0x200000 for OPTEE */ |
| gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE |
| + gd->bd->bi_dram[0].size + 0x200000; |
| gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start |
| + gd->ram_size - gd->bd->bi_dram[1].start; |
| |
| return 0; |
| } |
| |
| #ifndef CONFIG_SYS_DCACHE_OFF |
| void enable_caches(void) |
| { |
| /* Enable D-cache. I-cache is already enabled in start.S */ |
| dcache_enable(); |
| } |
| #endif |
| |
| #if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) |
| #include <usb.h> |
| #include <usb/dwc2_udc.h> |
| |
| static struct dwc2_plat_otg_data rk322x_otg_data = { |
| .rx_fifo_sz = 512, |
| .np_tx_fifo_sz = 16, |
| .tx_fifo_sz = 128, |
| }; |
| |
| int board_usb_init(int index, enum usb_init_type init) |
| { |
| int node; |
| const char *mode; |
| bool matched = false; |
| const void *blob = gd->fdt_blob; |
| |
| /* find the usb_otg node */ |
| node = fdt_node_offset_by_compatible(blob, -1, |
| "rockchip,rk3288-usb"); |
| |
| while (node > 0) { |
| mode = fdt_getprop(blob, node, "dr_mode", NULL); |
| if (mode && strcmp(mode, "otg") == 0) { |
| matched = true; |
| break; |
| } |
| |
| node = fdt_node_offset_by_compatible(blob, node, |
| "rockchip,rk3288-usb"); |
| } |
| if (!matched) { |
| debug("Not found usb_otg device\n"); |
| return -ENODEV; |
| } |
| rk322x_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); |
| |
| return dwc2_udc_probe(&rk322x_otg_data); |
| } |
| |
| int board_usb_cleanup(int index, enum usb_init_type init) |
| { |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_USB_FUNCTION_FASTBOOT) |
| int fb_set_reboot_flag(void) |
| { |
| struct rk322x_grf *grf; |
| |
| printf("Setting reboot to fastboot flag ...\n"); |
| grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| /* Set boot mode to fastboot */ |
| writel(BOOT_FASTBOOT, &grf->os_reg[0]); |
| |
| return 0; |
| } |
| #endif |