| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * USB armory MkI board configuration settings |
| * http://inversepath.com/usbarmory |
| * |
| * Copyright (C) 2015, Inverse Path |
| * Andrej Rosano <andrej@inversepath.com> |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define CONFIG_SYS_FSL_CLK |
| |
| #include <asm/arch/imx-regs.h> |
| |
| /* U-Boot environment */ |
| #define CONFIG_SYS_MMC_ENV_DEV 0 |
| |
| /* U-Boot general configurations */ |
| #define CONFIG_SYS_CBSIZE 512 |
| |
| /* UART */ |
| #define CONFIG_MXC_UART_BASE UART1_BASE |
| |
| /* SD/MMC */ |
| #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
| #define CONFIG_SYS_FSL_ESDHC_NUM 1 |
| |
| /* USB */ |
| #define CONFIG_MXC_USB_PORT 1 |
| #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| #define CONFIG_MXC_USB_FLAGS 0 |
| |
| /* I2C */ |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_MXC |
| #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ |
| #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ |
| |
| /* Fuse */ |
| #define CONFIG_FSL_IIM |
| |
| /* U-Boot memory offsets */ |
| #define CONFIG_LOADADDR 0x72000000 |
| #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| |
| /* Linux boot */ |
| #define CONFIG_HOSTNAME "usbarmory" |
| #define CONFIG_BOOTCOMMAND \ |
| "run distro_bootcmd; " \ |
| "setenv bootargs console=${console} ${bootargs_default}; " \ |
| "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \ |
| "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \ |
| "bootz ${kernel_addr_r} - ${fdt_addr_r}" |
| |
| #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0) |
| |
| #include <config_distro_bootcmd.h> |
| |
| #define MEM_LAYOUT_ENV_SETTINGS \ |
| "kernel_addr_r=0x70800000\0" \ |
| "fdt_addr_r=0x71000000\0" \ |
| "scriptaddr=0x70800000\0" \ |
| "pxefile_addr_r=0x70800000\0" \ |
| "ramdisk_addr_r=0x73000000\0" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| MEM_LAYOUT_ENV_SETTINGS \ |
| "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \ |
| "fdtfile=imx53-usbarmory.dtb\0" \ |
| "console=ttymxc0,115200\0" \ |
| BOOTENV |
| |
| #ifndef CONFIG_CMDLINE |
| #define USBARMORY_FIT_PATH "/boot/usbarmory.itb" |
| #define USBARMORY_FIT_ADDR "0x70800000" |
| #endif |
| |
| /* Physical Memory Map */ |
| #define PHYS_SDRAM CSD0_BASE_ADDR |
| #define PHYS_SDRAM_SIZE (gd->ram_size) |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
| #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| |
| #define CONFIG_SYS_INIT_SP_OFFSET \ |
| (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_ADDR \ |
| (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| |
| #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) |
| |
| #endif /* __CONFIG_H */ |