blob: f2b356eb447bca4ad4fee2f7c9232fe467e7202c [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Special driver to handle of-platdata
*
* Copyright 2019 Google LLC
*
* Some code from coreboot lpss.c
*/
#include <common.h>
#include <dm.h>
#include <dt-structs.h>
#include <ns16550.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/lpss.h>
/* Low-power Subsystem (LPSS) clock register */
enum {
LPSS_CLOCK_CTL_REG = 0x200,
LPSS_CNT_CLOCK_EN = 1,
LPSS_CNT_CLK_UPDATE = 1U << 31,
LPSS_CLOCK_DIV_N_SHIFT = 16,
LPSS_CLOCK_DIV_N_MASK = 0x7fff << LPSS_CLOCK_DIV_N_SHIFT,
LPSS_CLOCK_DIV_M_SHIFT = 1,
LPSS_CLOCK_DIV_M_MASK = 0x7fff << LPSS_CLOCK_DIV_M_SHIFT,
/* These set the UART input clock speed */
LPSS_UART_CLK_M_VAL = 0x25a,
LPSS_UART_CLK_N_VAL = 0x7fff,
};
static void lpss_clk_update(void *regs, u32 clk_m_val, u32 clk_n_val)
{
u32 clk_sel;
clk_sel = clk_n_val << LPSS_CLOCK_DIV_N_SHIFT |
clk_m_val << LPSS_CLOCK_DIV_M_SHIFT;
clk_sel |= LPSS_CNT_CLK_UPDATE | LPSS_CNT_CLOCK_EN;
writel(clk_sel, regs + LPSS_CLOCK_CTL_REG);
}
static void uart_lpss_init(void *regs)
{
/* Take UART out of reset */
lpss_reset_release(regs);
/* Set M and N divisor inputs and enable clock */
lpss_clk_update(regs, LPSS_UART_CLK_M_VAL, LPSS_UART_CLK_N_VAL);
}
void apl_uart_init(pci_dev_t bdf, ulong base)
{
/* Set UART base address */
pci_x86_write_config(bdf, PCI_BASE_ADDRESS_0, base, PCI_SIZE_32);
/* Enable memory access and bus master */
pci_x86_write_config(bdf, PCI_COMMAND, PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER, PCI_SIZE_32);
uart_lpss_init((void *)base);
}
/*
* This driver uses its own compatible string but almost everything else from
* the standard ns16550 driver. This allows us to provide an of-platdata
* implementation, since the platdata produced by of-platdata does not match
* struct ns16550_platdata.
*
* When running with of-platdata (generally TPL), the platdata is converted to
* something that ns16550 expects. When running withoutof-platdata (SPL, U-Boot
* proper), we use ns16550's ofdata_to_platdata routine.
*/
static int apl_ns16550_probe(struct udevice *dev)
{
struct ns16550_platdata *plat = dev_get_platdata(dev);
if (!CONFIG_IS_ENABLED(PCI))
apl_uart_init(plat->bdf, plat->base);
return ns16550_serial_probe(dev);
}
static int apl_ns16550_ofdata_to_platdata(struct udevice *dev)
{
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct dtd_intel_apl_ns16550 *dtplat = dev_get_platdata(dev);
struct ns16550_platdata *plat;
/*
* Convert our platdata to the ns16550's platdata, so we can just use
* that driver
*/
plat = malloc(sizeof(*plat));
if (!plat)
return -ENOMEM;
plat->base = dtplat->early_regs[0];
plat->reg_width = 1;
plat->reg_shift = dtplat->reg_shift;
plat->reg_offset = 0;
plat->clock = dtplat->clock_frequency;
plat->fcr = UART_FCR_DEFVAL;
plat->bdf = pci_ofplat_get_devfn(dtplat->reg[0]);
dev->platdata = plat;
#else
int ret;
ret = ns16550_serial_ofdata_to_platdata(dev);
if (ret)
return ret;
#endif /* OF_PLATDATA */
return 0;
}
static const struct udevice_id apl_ns16550_serial_ids[] = {
{ .compatible = "intel,apl-ns16550" },
{ },
};
U_BOOT_DRIVER(apl_ns16550) = {
.name = "intel_apl_ns16550",
.id = UCLASS_SERIAL,
.of_match = apl_ns16550_serial_ids,
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
.priv_auto_alloc_size = sizeof(struct NS16550),
.ops = &ns16550_serial_ops,
.ofdata_to_platdata = apl_ns16550_ofdata_to_platdata,
.probe = apl_ns16550_probe,
};