| /* |
| * (C) Copyright 2010,2011 |
| * NVIDIA Corporation <www.nvidia.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <asm/sizes.h> |
| #include "tegra2-common.h" |
| |
| /* High-level configuration options */ |
| #define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M mem=512M@512M" |
| #define V_PROMPT "Tegra2 (SeaBoard) # " |
| #define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Seaboard" |
| |
| /* Board-specific serial config */ |
| #define CONFIG_SERIAL_MULTI |
| #define CONFIG_TEGRA2_ENABLE_UARTD |
| #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE |
| |
| /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ |
| #define CONFIG_UART_DISABLE_GPIO GPIO_PI3 |
| |
| #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD |
| #define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */ |
| |
| #define CONFIG_BOARD_EARLY_INIT_F |
| |
| /* SPI */ |
| #define CONFIG_TEGRA2_SPI |
| #define CONFIG_SPI_FLASH |
| #define CONFIG_SPI_FLASH_WINBOND |
| #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 |
| #define CONFIG_CMD_SPI |
| #define CONFIG_CMD_SF |
| #define CONFIG_SPI_FLASH_SIZE (4 << 20) |
| |
| /* SD/MMC */ |
| #define CONFIG_MMC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_TEGRA2_MMC |
| #define CONFIG_CMD_MMC |
| |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_EFI_PARTITION |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_FAT |
| |
| /* Environment in SPI */ |
| #define CONFIG_ENV_IS_IN_SPI_FLASH |
| #define CONFIG_ENV_SPI_MAX_HZ 48000000 |
| #define CONFIG_ENV_SPI_MODE SPI_MODE_0 |
| |
| #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE |
| #define CONFIG_ENV_OFFSET (CONFIG_SPI_FLASH_SIZE - CONFIG_ENV_SECT_SIZE) |
| |
| /* USB Host support */ |
| #define CONFIG_USB_EHCI |
| #define CONFIG_USB_EHCI_TEGRA |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_CMD_USB |
| |
| #endif /* __CONFIG_H */ |