| /** |
| * @file IxEthDBDBNPEAdaptor.c |
| * |
| * @brief Routines that read and write learning/search trees in NPE-specific format |
| * |
| * @par |
| * IXP400 SW Release version 2.0 |
| * |
| * -- Copyright Notice -- |
| * |
| * @par |
| * Copyright 2001-2005, Intel Corporation. |
| * All rights reserved. |
| * |
| * @par |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the Intel Corporation nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * @par |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * @par |
| * -- End of Copyright Notice -- |
| */ |
| |
| #include "IxEthDB_p.h" |
| #include "IxEthDBLog_p.h" |
| |
| /* forward prototype declarations */ |
| IX_ETH_DB_PUBLIC void ixEthDBELTShow(IxEthDBPortId portID); |
| IX_ETH_DB_PUBLIC void ixEthDBShowNpeMsgHistory(void); |
| |
| /* data */ |
| UINT8* ixEthDBNPEUpdateArea[IX_ETH_DB_NUMBER_OF_PORTS]; |
| UINT32 dumpEltSize; |
| |
| /* private data */ |
| IX_ETH_DB_PRIVATE IxEthDBNoteWriteFn ixEthDBNPENodeWrite[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; |
| |
| #define IX_ETH_DB_MAX_DELTA_ZONES (6) /* at most 6 EP Delta zones, according to NPE FS */ |
| IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDeltaOffset[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES]; |
| IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDelta[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES]; |
| |
| /** |
| * @brief allocates non-cached or contiguous NPE tree update areas for all the ports |
| * |
| * This function is called only once at initialization time from |
| * @ref ixEthDBInit(). |
| * |
| * @warning do not call manually |
| * |
| * @see ixEthDBInit() |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBNPEUpdateAreasInit(void) |
| { |
| UINT32 portIndex; |
| PortUpdateMethod *update; |
| |
| for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) |
| { |
| update = &ixEthDBPortInfo[portIndex].updateMethod; |
| |
| if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) |
| { |
| update->npeUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_ELT_BYTE_SIZE); |
| update->npeGwUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_GW_BYTE_SIZE); |
| update->vlanUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_VLAN_BYTE_SIZE); |
| |
| if (update->npeUpdateZone == NULL |
| || update->npeGwUpdateZone == NULL |
| || update->vlanUpdateZone == NULL) |
| { |
| ERROR_LOG("Fatal error: IX_ACC_DRV_DMA_MALLOC() returned NULL, no NPE update zones available\n"); |
| } |
| else |
| { |
| memset(update->npeUpdateZone, 0, FULL_ELT_BYTE_SIZE); |
| memset(update->npeGwUpdateZone, 0, FULL_GW_BYTE_SIZE); |
| memset(update->vlanUpdateZone, 0, FULL_VLAN_BYTE_SIZE); |
| } |
| } |
| else |
| { |
| /* unused */ |
| update->npeUpdateZone = NULL; |
| update->npeGwUpdateZone = NULL; |
| update->vlanUpdateZone = NULL; |
| } |
| } |
| } |
| |
| /** |
| * @brief deallocates the NPE update areas for all the ports |
| * |
| * This function is called at component de-initialization time |
| * by @ref ixEthDBUnload(). |
| * |
| * @warning do not call manually |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBNPEUpdateAreasUnload(void) |
| { |
| UINT32 portIndex; |
| |
| for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) |
| { |
| if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) |
| { |
| IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone); |
| IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeGwUpdateZone); |
| IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.vlanUpdateZone); |
| } |
| } |
| } |
| |
| /** |
| * @brief general-purpose NPE callback function |
| * |
| * @param npeID NPE ID |
| * @param msg NPE message |
| * |
| * This function will unblock the caller by unlocking |
| * the npeAckLock mutex defined for each NPE port |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBNpeMsgAck(IxNpeMhNpeId npeID, IxNpeMhMessage msg) |
| { |
| IxEthDBPortId portID = IX_ETH_DB_NPE_TO_PORT_ID(npeID); |
| PortInfo *portInfo; |
| |
| if (portID >= IX_ETH_DB_NUMBER_OF_PORTS) |
| { |
| /* invalid port */ |
| return; |
| } |
| |
| if (ixEthDBPortDefinitions[portID].type != IX_ETH_NPE) |
| { |
| /* not an NPE */ |
| return; |
| } |
| |
| portInfo = &ixEthDBPortInfo[portID]; |
| |
| ixOsalMutexUnlock(&portInfo->npeAckLock); |
| } |
| |
| /** |
| * @brief synchronizes the database with tree |
| * |
| * @param portID port ID of the NPE whose tree is to be scanned |
| * @param eltBaseAddress memory base address of the NPE serialized tree |
| * @param eltSize size in bytes of the NPE serialized tree |
| * |
| * Scans the NPE learning tree and resets the age of active database records. |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSize) |
| { |
| UINT32 eltEntryOffset; |
| UINT32 entryPortID; |
| |
| /* invalidate cache */ |
| IX_OSAL_CACHE_INVALIDATE(eltBaseAddress, eltSize); |
| |
| for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE) |
| { |
| /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node |
| * |
| * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit] |
| * therefore we can just use the pointer for database searches as only the first 6 bytes are checked |
| */ |
| void *eltNodeAddress = (void *) ((UINT32) eltBaseAddress + eltEntryOffset); |
| |
| /* debug */ |
| IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) checking node at offset %d...\n", eltEntryOffset / ELT_ENTRY_SIZE); |
| |
| if (IX_EDB_NPE_NODE_VALID(eltNodeAddress) != TRUE) |
| { |
| IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is empty\n"); |
| } |
| else if (eltEntryOffset == ELT_ROOT_OFFSET) |
| { |
| IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is root\n"); |
| } |
| |
| if (IX_EDB_NPE_NODE_VALID(eltNodeAddress)) |
| { |
| entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress)); |
| |
| /* check only active entries belonging to this port */ |
| if (ixEthDBPortInfo[portID].agingEnabled && IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) && (portID == entryPortID) |
| && ((ixEthDBPortDefinitions[portID].capabilities & IX_ETH_ENTRY_AGING) == 0)) |
| { |
| /* search record */ |
| HashNode *node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_FILTERING_RECORDS); |
| |
| /* safety check, maybe user deleted record right before sync? */ |
| if (node != NULL) |
| { |
| /* found record */ |
| MacDescriptor *descriptor = (MacDescriptor *) node->data; |
| |
| IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) synced entry [%s] already in the database, updating fields\n", mac2string(eltNodeAddress)); |
| |
| /* reset age - set to -1 so that maintenance will restore it to 0 (or more) when incrementing */ |
| if (!descriptor->recordData.filteringData.staticEntry) |
| { |
| if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) |
| { |
| descriptor->recordData.filteringData.age = AGE_RESET; |
| } |
| else if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) |
| { |
| descriptor->recordData.filteringVlanData.age = AGE_RESET; |
| } |
| } |
| |
| /* end transaction */ |
| ixEthDBReleaseHashNode(node); |
| } |
| } |
| else |
| { |
| IX_ETH_DB_NPE_VERBOSE_TRACE("\t... found portID %d, we check only port %d\n", entryPortID, portID); |
| } |
| } |
| } |
| } |
| |
| /** |
| * @brief writes a search tree in NPE format |
| * |
| * @param type type of records to be written into the NPE update zone |
| * @param totalSize maximum size of the linearized tree |
| * @param baseAddress memory base address where to write the NPE tree into |
| * @param tree search tree to write in NPE format |
| * @param blocks number of written 64-byte blocks |
| * @param startIndex optimal binary search start index |
| * |
| * Serializes the given tree in NPE linear format |
| * |
| * @return none |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBNPETreeWrite(IxEthDBRecordType type, UINT32 totalSize, void *baseAddress, MacTreeNode *tree, UINT32 *epDelta, UINT32 *blocks) |
| { |
| MacTreeNodeStack *stack; |
| UINT32 maxOffset = 0; |
| UINT32 emptyOffset; |
| |
| stack = ixOsalCacheDmaMalloc(sizeof (MacTreeNodeStack)); |
| |
| if (stack == NULL) |
| { |
| ERROR_LOG("DB: (NPEAdaptor) failed to allocate the node stack for learning tree linearization, out of memory?\n"); |
| return; |
| } |
| |
| /* zero out empty root */ |
| memset(baseAddress, 0, ELT_ENTRY_SIZE); |
| |
| NODE_STACK_INIT(stack); |
| |
| if (tree != NULL) |
| { |
| /* push tree root at offset 1 */ |
| NODE_STACK_PUSH(stack, tree, 1); |
| |
| maxOffset = 1; |
| } |
| |
| while (NODE_STACK_NONEMPTY(stack)) |
| { |
| MacTreeNode *node; |
| UINT32 offset; |
| |
| NODE_STACK_POP(stack, node, offset); |
| |
| /* update maximum offset */ |
| if (offset > maxOffset) |
| { |
| maxOffset = offset; |
| } |
| |
| IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing MAC [%s] at offset %d\n", mac2string(node->descriptor->macAddress), offset); |
| |
| /* add node to NPE ELT at position indicated by offset */ |
| if (offset < MAX_ELT_SIZE) |
| { |
| ixEthDBNPENodeWrite[type]((void *) (((UINT32) baseAddress) + offset * ELT_ENTRY_SIZE), node); |
| } |
| |
| if (node->left != NULL) |
| { |
| NODE_STACK_PUSH(stack, node->left, LEFT_CHILD_OFFSET(offset)); |
| } |
| else |
| { |
| /* ensure this entry is zeroed */ |
| memset((void *) ((UINT32) baseAddress + LEFT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE); |
| } |
| |
| if (node->right != NULL) |
| { |
| NODE_STACK_PUSH(stack, node->right, RIGHT_CHILD_OFFSET(offset)); |
| } |
| else |
| { |
| /* ensure this entry is zeroed */ |
| memset((void *) ((UINT32) baseAddress + RIGHT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE); |
| } |
| } |
| |
| emptyOffset = maxOffset + 1; |
| |
| /* zero out rest of the tree */ |
| IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Emptying tree from offset %d, address 0x%08X, %d bytes\n", |
| emptyOffset, ((UINT32) baseAddress) + emptyOffset * ELT_ENTRY_SIZE, totalSize - (emptyOffset * ELT_ENTRY_SIZE)); |
| |
| if (emptyOffset < MAX_ELT_SIZE - 1) |
| { |
| memset((void *) (((UINT32) baseAddress) + (emptyOffset * ELT_ENTRY_SIZE)), 0, totalSize - (emptyOffset * ELT_ENTRY_SIZE)); |
| } |
| |
| /* flush cache */ |
| IX_OSAL_CACHE_FLUSH(baseAddress, totalSize); |
| |
| /* debug */ |
| IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Ethernet learning/filtering tree XScale wrote at address 0x%08X (max %d bytes):\n\n", |
| (UINT32) baseAddress, FULL_ELT_BYTE_SIZE); |
| |
| IX_ETH_DB_NPE_DUMP_ELT(baseAddress, FULL_ELT_BYTE_SIZE); |
| |
| /* compute number of 64-byte blocks */ |
| if (blocks != NULL) |
| { |
| *blocks = maxOffset != 0 ? 1 + maxOffset / 8 : 0; |
| |
| IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Wrote %d 64-byte blocks\n", *blocks); |
| } |
| |
| /* compute epDelta - start index for binary search */ |
| if (epDelta != NULL) |
| { |
| UINT32 deltaIndex = 0; |
| |
| *epDelta = 0; |
| |
| for (; deltaIndex < IX_ETH_DB_MAX_DELTA_ZONES ; deltaIndex ++) |
| { |
| if (ixEthDBEPDeltaOffset[type][deltaIndex] >= maxOffset) |
| { |
| *epDelta = ixEthDBEPDelta[type][deltaIndex]; |
| break; |
| } |
| } |
| |
| IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Computed epDelta %d (based on maxOffset %d)\n", *epDelta, maxOffset); |
| } |
| |
| ixOsalCacheDmaFree(stack); |
| } |
| |
| /** |
| * @brief implements a dummy node serialization function |
| * |
| * @param address address of where the node is to be serialized (unused) |
| * @param node tree node to be serialized (unused) |
| * |
| * This function is registered for safety reasons and should |
| * never be called. It will display an error message if this |
| * function is called. |
| * |
| * @return none |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PRIVATE |
| void ixEthDBNullSerialize(void *address, MacTreeNode *node) |
| { |
| IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Warning, the NullSerialize function was called, wrong record type?\n"); |
| } |
| |
| /** |
| * @brief writes a filtering entry in NPE linear format |
| * |
| * @param address memory address to write node to |
| * @param node node to be written |
| * |
| * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree |
| * in NPE-readable format. |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PRIVATE |
| void ixEthDBNPELearningNodeWrite(void *address, MacTreeNode *node) |
| { |
| /* copy mac address */ |
| memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); |
| |
| /* copy port ID */ |
| NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET) = IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(node->descriptor->portID); |
| |
| /* copy flags (valid and not active, as the NPE sets it to active) and clear reserved section (bits 2-7) */ |
| NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) = (UINT8) IX_EDB_FLAGS_INACTIVE_VALID; |
| |
| IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing ELT node 0x%08x:0x%08x\n", * (UINT32 *) address, * (((UINT32 *) (address)) + 1)); |
| } |
| |
| /** |
| * @brief writes a WiFi header conversion record in |
| * NPE linear format |
| * |
| * @param address memory address to write node to |
| * @param node node to be written |
| * |
| * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree |
| * in NPE-readable format. |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PRIVATE |
| void ixEthDBNPEWiFiNodeWrite(void *address, MacTreeNode *node) |
| { |
| /* copy mac address */ |
| memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); |
| |
| /* copy index */ |
| NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_INDEX_OFFSET) = node->descriptor->recordData.wifiData.gwAddressIndex; |
| |
| /* copy flags (type and valid) */ |
| NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_FLAGS_OFFSET) = node->descriptor->recordData.wifiData.type << 1 | IX_EDB_FLAGS_VALID; |
| } |
| |
| /** |
| * @brief writes a WiFi gateway header conversion record in |
| * NPE linear format |
| * |
| * @param address memory address to write node to |
| * @param node node to be written |
| * |
| * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree |
| * in NPE-readable format. |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBNPEGatewayNodeWrite(void *address, MacTreeNode *node) |
| { |
| /* copy mac address */ |
| memcpy(address, node->descriptor->recordData.wifiData.gwMacAddress, IX_IEEE803_MAC_ADDRESS_SIZE); |
| |
| /* set reserved field, two bytes */ |
| NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET) = 0; |
| NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET + 1) = 0; |
| } |
| |
| /** |
| * @brief writes a firewall record in |
| * NPE linear format |
| * |
| * @param address memory address to write node to |
| * @param node node to be written |
| * |
| * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree |
| * in NPE-readable format. |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PRIVATE |
| void ixEthDBNPEFirewallNodeWrite(void *address, MacTreeNode *node) |
| { |
| /* set reserved field */ |
| NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET) = 0; |
| |
| /* set flags */ |
| NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_FLAGS_OFFSET) = IX_EDB_FLAGS_VALID; |
| |
| /* copy mac address */ |
| memcpy((void *) ((UINT32) address + IX_EDB_NPE_NODE_FW_ADDR_OFFSET), node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); |
| } |
| |
| /** |
| * @brief registers the NPE serialization methods |
| * |
| * This functions registers NPE serialization methods |
| * for writing the following types of records in NPE |
| * readable linear format: |
| * - filtering records |
| * - WiFi header conversion records |
| * - WiFi gateway header conversion records |
| * - firewall records |
| * |
| * Note that this function should be called by the |
| * component initialization function. |
| * |
| * @return number of registered record types |
| * |
| * @internal |
| */ |
| IX_ETH_DB_PUBLIC |
| UINT32 ixEthDBRecordSerializeMethodsRegister() |
| { |
| int i; |
| |
| /* safety - register a blank method for everybody first */ |
| for ( i = 0 ; i < IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1 ; i++) |
| { |
| ixEthDBNPENodeWrite[i] = ixEthDBNullSerialize; |
| } |
| |
| /* register real methods */ |
| ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_RECORD] = ixEthDBNPELearningNodeWrite; |
| ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_VLAN_RECORD] = ixEthDBNPELearningNodeWrite; |
| ixEthDBNPENodeWrite[IX_ETH_DB_WIFI_RECORD] = ixEthDBNPEWiFiNodeWrite; |
| ixEthDBNPENodeWrite[IX_ETH_DB_FIREWALL_RECORD] = ixEthDBNPEFirewallNodeWrite; |
| ixEthDBNPENodeWrite[IX_ETH_DB_GATEWAY_RECORD] = ixEthDBNPEGatewayNodeWrite; |
| |
| /* EP Delta arrays */ |
| memset(ixEthDBEPDeltaOffset, 0, sizeof (ixEthDBEPDeltaOffset)); |
| memset(ixEthDBEPDelta, 0, sizeof (ixEthDBEPDelta)); |
| |
| /* filtering records */ |
| ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][0] = 1; |
| ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][0] = 0; |
| |
| ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][1] = 3; |
| ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][1] = 7; |
| |
| ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][2] = 511; |
| ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][2] = 14; |
| |
| /* wifi records */ |
| ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][0] = 1; |
| ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][0] = 0; |
| |
| ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][1] = 3; |
| ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][1] = 7; |
| |
| ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][2] = 511; |
| ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][2] = 14; |
| |
| /* firewall records */ |
| ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][0] = 0; |
| ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][0] = 0; |
| |
| ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][1] = 1; |
| ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][1] = 5; |
| |
| ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][2] = 3; |
| ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][2] = 13; |
| |
| ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][3] = 7; |
| ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][3] = 21; |
| |
| ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][4] = 15; |
| ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][4] = 29; |
| |
| ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][5] = 31; |
| ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][5] = 37; |
| |
| return 5; /* 5 methods registered */ |
| } |
| |
| #ifndef IX_NDEBUG |
| |
| IX_ETH_DB_PUBLIC UINT32 npeMsgHistory[IX_ETH_DB_NPE_MSG_HISTORY_DEPTH][2]; |
| IX_ETH_DB_PUBLIC UINT32 npeMsgHistoryLen = 0; |
| |
| /** |
| * When compiled in DEBUG mode, this function can be used to display |
| * the history of messages sent to the NPEs (up to 100). |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBShowNpeMsgHistory() |
| { |
| UINT32 i = 0; |
| UINT32 base, len; |
| |
| if (npeMsgHistoryLen <= IX_ETH_DB_NPE_MSG_HISTORY_DEPTH) |
| { |
| base = 0; |
| len = npeMsgHistoryLen; |
| } |
| else |
| { |
| base = npeMsgHistoryLen % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; |
| len = IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; |
| } |
| |
| printf("NPE message history [last %d messages, from least to most recent]:\n", len); |
| |
| for (; i < len ; i++) |
| { |
| UINT32 pos = (base + i) % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; |
| printf("msg[%d]: 0x%08x:0x%08x\n", i, npeMsgHistory[pos][0], npeMsgHistory[pos][1]); |
| } |
| } |
| |
| IX_ETH_DB_PUBLIC |
| void ixEthDBELTShow(IxEthDBPortId portID) |
| { |
| IxNpeMhMessage message; |
| IX_STATUS result; |
| |
| /* send EDB_GetMACAddressDatabase message */ |
| FILL_GETMACADDRESSDATABASE(message, |
| 0 /* reserved */, |
| IX_OSAL_MMU_VIRT_TO_PHYS(ixEthDBPortInfo[portID].updateMethod.npeUpdateZone)); |
| |
| IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); |
| |
| if (result == IX_SUCCESS) |
| { |
| /* analyze NPE copy */ |
| UINT32 eltEntryOffset; |
| UINT32 entryPortID; |
| |
| UINT32 eltBaseAddress = (UINT32) ixEthDBPortInfo[portID].updateMethod.npeUpdateZone; |
| UINT32 eltSize = FULL_ELT_BYTE_SIZE; |
| |
| /* invalidate cache */ |
| IX_OSAL_CACHE_INVALIDATE((void *) eltBaseAddress, eltSize); |
| |
| printf("Listing records in main learning tree for port %d\n", portID); |
| |
| for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE) |
| { |
| /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node |
| * |
| * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit] |
| * therefore we can just use the pointer for database searches as only the first 6 bytes are checked |
| */ |
| void *eltNodeAddress = (void *) ((UINT32) eltBaseAddress + eltEntryOffset); |
| |
| if (IX_EDB_NPE_NODE_VALID(eltNodeAddress)) |
| { |
| HashNode *node; |
| |
| entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress)); |
| |
| /* search record */ |
| node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_RECORD_TYPES); |
| |
| printf("%s - port %d - %s ", mac2string((unsigned char *) eltNodeAddress), entryPortID, |
| IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) ? "active" : "inactive"); |
| |
| /* safety check, maybe user deleted record right before sync? */ |
| if (node != NULL) |
| { |
| /* found record */ |
| MacDescriptor *descriptor = (MacDescriptor *) node->data; |
| |
| printf("- %s ", |
| descriptor->type == IX_ETH_DB_FILTERING_RECORD ? "filtering" : |
| descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD ? "vlan" : |
| descriptor->type == IX_ETH_DB_WIFI_RECORD ? "wifi" : "other (check main DB)"); |
| |
| if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) printf("- age %d - %s ", |
| descriptor->recordData.filteringData.age, |
| descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); |
| |
| if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) printf("- age %d - %s - tci %d ", |
| descriptor->recordData.filteringVlanData.age, |
| descriptor->recordData.filteringVlanData.staticEntry ? "static" : "dynamic", |
| descriptor->recordData.filteringVlanData.ieee802_1qTag); |
| |
| /* end transaction */ |
| ixEthDBReleaseHashNode(node); |
| } |
| else |
| { |
| printf("- not synced"); |
| } |
| |
| printf("\n"); |
| } |
| } |
| } |
| else |
| { |
| ixOsalLog(IX_OSAL_LOG_LVL_FATAL, IX_OSAL_LOG_DEV_STDOUT, |
| "EthDB: (ShowELT) Could not complete action (communication failure)\n", |
| portID, 0, 0, 0, 0, 0); |
| } |
| } |
| |
| #endif |