blob: 0ec60cadb49ecc5069efa1cb32cebd27505adf0c [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2009 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Kyungmin Park <kyungmin.park@samsung.com>
*
* Configuation settings for the SAMSUNG Universal (s5pc100) board.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* which is in a S5P Family */
#define CONFIG_S5PC110 1 /* which is in a S5PC110 */
#include <linux/sizes.h>
#include <asm/arch/cpu.h> /* get chip and board defs */
/* DRAM Base */
#define CONFIG_SYS_SDRAM_BASE 0x30000000
/* Text Base */
/* MMC */
#define SDHCI_MAX_HOSTS 4
/* PWM */
#define CONFIG_PWM 1
/* USB Composite download gadget - g_dnl */
#define DFU_DEFAULT_POLL_TIMEOUT 300
/* USB Samsung's IDs */
#define CONFIG_G_DNL_THOR_VENDOR_NUM 0x04E8
#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
/* partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOTLOADER "u-boot"
#define PARTS_BOOT "boot"
#define PARTS_ROOT "platform"
#define PARTS_DATA "data"
#define PARTS_CSC "csc"
#define PARTS_UMS "ums"
#define CONFIG_DFU_ALT \
"u-boot raw 0x80 0x400;" \
"uImage ext4 0 2;" \
"exynos3-goni.dtb ext4 0 2;" \
""PARTS_ROOT" part 0 5\0"
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
"name="PARTS_BOOTLOADER",size=60MiB," \
"uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
"name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
"name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
"name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \
" ${console} ${meminfo}"
#define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}"
#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \
" onenand write 0x32008000 0x0 0x100000\0"
#define CONFIG_MISC_COMMON
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_UPDATEB \
"updatek=" \
"onenand erase 0xc00000 0x600000;" \
"onenand write 0x31008000 0xc00000 0x600000\0" \
"updateu=" \
"onenand erase 0x01560000 0x1eaa0000;" \
"onenand write 0x32000000 0x1260000 0x8C0000\0" \
"bootk=" \
"run loaduimage;" \
"bootm 0x30007FC0\0" \
"flashboot=" \
"set bootargs root=/dev/mtdblock${bootblock} " \
"rootfstype=${rootfstype} ${opts} " \
"${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \
"ubifsboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
"${opts} ${lcdinfo} " \
CONFIG_COMMON_BOOT "; run bootk\0" \
"tftpboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
"${opts} ${lcdinfo} " CONFIG_COMMON_BOOT \
"; tftp 0x30007FC0 uImage; bootm 0x30007FC0\0" \
"ramboot=" \
"set bootargs " CONFIG_RAMDISK_BOOT \
"initrd=0x33000000,8M ramdisk=8192\0" \
"mmcboot=" \
"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"rootfstype=${rootfstype} ${opts} ${lcdinfo} " \
CONFIG_COMMON_BOOT "; run bootk\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
"console=console=ttySAC2,115200n8\0" \
"meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
"mmcdev=0\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
"partitions=" PARTS_DEFAULT \
"bootblock=9\0" \
"ubiblock=8\0" \
"ubi=enabled\0" \
"opts=always_resume=1\0" \
"dfu_alt_info=" CONFIG_DFU_ALT "\0"
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
/* Goni has 3 banks of DRAM, but swap the bank */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */
#define PHYS_SDRAM_1_SIZE (80 << 20) /* 80 MB in Bank #0 */
#define PHYS_SDRAM_2 0x40000000 /* mDDR DMC1 Bank #1 */
#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in Bank #1 */
#define PHYS_SDRAM_3 0x50000000 /* mDDR DMC2 Bank #2 */
#define PHYS_SDRAM_3_SIZE (128 << 20) /* 128 MB in Bank #2 */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */
/* FLASH and environment organization */
#define CONFIG_MMC_DEFAULT_DEV 0
#define CONFIG_USE_ONENAND_BOARD_INIT
#define CONFIG_SAMSUNG_ONENAND 1
#define CONFIG_SYS_ONENAND_BASE 0xB0000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
#define CONFIG_USB_GADGET_DWC2_OTG_PHY
#endif /* __CONFIG_H */