blob: 9347329eac8820aef75d128503b7b08f7cf60b9b [file] [log] [blame]
/*
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <misc.h>
#include <ram.h>
#include <dm/pinctrl.h>
#include <dm/uclass-internal.h>
#include <asm/setup.h>
#include <asm/arch/periph.h>
#include <power/regulator.h>
#include <u-boot/sha256.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
struct udevice *pinctrl, *regulator;
int ret;
/*
* The PWM does not have decicated interrupt number in dts and can
* not get periph_id by pinctrl framework, so let's init them here.
* The PWM2 and PWM3 are for pwm regulators.
*/
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
goto out;
}
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM2);
if (ret) {
debug("%s PWM2 pinctrl init fail!\n", __func__);
goto out;
}
/* rk3399 need to init vdd_center to get the correct output voltage */
ret = regulator_get_by_platname("vdd_center", &regulator);
if (ret)
debug("%s: Cannot get vdd_center regulator\n", __func__);
ret = regulator_get_by_platname("vcc5v0_host", &regulator);
if (ret) {
debug("%s vcc5v0_host init fail! ret %d\n", __func__, ret);
goto out;
}
ret = regulator_set_enable(regulator, true);
if (ret) {
debug("%s vcc5v0-host-en set fail!\n", __func__);
goto out;
}
out:
return 0;
}
static void setup_macaddr(void)
{
#if CONFIG_IS_ENABLED(CMD_NET)
int ret;
const char *cpuid = getenv("cpuid#");
u8 hash[SHA256_SUM_LEN];
int size = sizeof(hash);
u8 mac_addr[6];
/* Only generate a MAC address, if none is set in the environment */
if (getenv("ethaddr"))
return;
if (!cpuid) {
debug("%s: could not retrieve 'cpuid#'\n", __func__);
return;
}
ret = hash_block("sha256", (void *)cpuid, strlen(cpuid), hash, &size);
if (ret) {
debug("%s: failed to calculate SHA256\n", __func__);
return;
}
/* Copy 6 bytes of the hash to base the MAC address on */
memcpy(mac_addr, hash, 6);
/* Make this a valid MAC address and set it */
mac_addr[0] &= 0xfe; /* clear multicast bit */
mac_addr[0] |= 0x02; /* set local assignment bit (IEEE802) */
eth_setenv_enetaddr("ethaddr", mac_addr);
#endif
return;
}
static void setup_serial(void)
{
#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
const u32 cpuid_offset = 0x7;
const u32 cpuid_length = 0x10;
struct udevice *dev;
int ret, i;
u8 cpuid[cpuid_length];
u8 low[cpuid_length/2], high[cpuid_length/2];
char cpuid_str[cpuid_length * 2 + 1];
u64 serialno;
char serialno_str[16];
/* retrieve the device */
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_GET_DRIVER(rockchip_efuse), &dev);
if (ret) {
debug("%s: could not find efuse device\n", __func__);
return;
}
/* read the cpu_id range from the efuses */
ret = misc_read(dev, cpuid_offset, &cpuid, sizeof(cpuid));
if (ret) {
debug("%s: reading cpuid from the efuses failed\n",
__func__);
return;
}
memset(cpuid_str, 0, sizeof(cpuid_str));
for (i = 0; i < 16; i++)
sprintf(&cpuid_str[i * 2], "%02x", cpuid[i]);
debug("cpuid: %s\n", cpuid_str);
/*
* Mix the cpuid bytes using the same rules as in
* ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c
*/
for (i = 0; i < 8; i++) {
low[i] = cpuid[1 + (i << 1)];
high[i] = cpuid[i << 1];
}
serialno = crc32_no_comp(0, low, 8);
serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
snprintf(serialno_str, sizeof(serialno_str), "%llx", serialno);
setenv("cpuid#", cpuid_str);
setenv("serial#", serialno_str);
#endif
return;
}
int misc_init_r(void)
{
setup_serial();
setup_macaddr();
return 0;
}
#ifdef CONFIG_SERIAL_TAG
void get_board_serial(struct tag_serialnr *serialnr)
{
char *serial_string;
u64 serial = 0;
serial_string = getenv("serial#");
if (serial_string)
serial = simple_strtoull(serial_string, NULL, 16);
serialnr->high = (u32)(serial >> 32);
serialnr->low = (u32)(serial & 0xffffffff);
}
#endif