| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * ld9040 AMOLED LCD panel driver. |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * Donghwa Lee <dh09.lee@samsung.com> |
| */ |
| |
| #include <common.h> |
| #include <spi.h> |
| #include <linux/delay.h> |
| |
| static const unsigned char SEQ_USER_SETTING[] = { |
| 0xF0, 0x5A, 0x5A |
| }; |
| |
| static const unsigned char SEQ_ELVSS_ON[] = { |
| 0xB1, 0x0D, 0x00, 0x16, |
| }; |
| |
| static const unsigned char SEQ_GTCON[] = { |
| 0xF7, 0x09, 0x00, 0x00, |
| }; |
| |
| static const unsigned char SEQ_PANEL_CONDITION[] = { |
| 0xF8, 0x05, 0x65, 0x96, 0x71, 0x7D, 0x19, 0x3B, |
| 0x0D, 0x19, 0x7E, 0x0D, 0xE2, 0x00, 0x00, 0x7E, |
| 0x7D, 0x07, 0x07, 0x20, 0x20, 0x20, 0x02, 0x02, |
| }; |
| |
| static const unsigned char SEQ_GAMMA_SET1[] = { |
| 0xF9, 0x00, 0xA7, 0xB4, 0xAE, 0xBF, 0x00, 0x91, |
| 0x00, 0xB2, 0xB4, 0xAA, 0xBB, 0x00, 0xAC, 0x00, |
| 0xB3, 0xB1, 0xAA, 0xBC, 0x00, 0xB3, |
| }; |
| |
| static const unsigned char SEQ_GAMMA_CTRL[] = { |
| 0xFB, 0x02, 0x5A, |
| }; |
| |
| static const unsigned char SEQ_DISPCTL[] = { |
| 0xF2, 0x02, 0x08, 0x08, 0x10, 0x10, |
| }; |
| |
| static const unsigned char SEQ_MANPWR[] = { |
| 0xB0, 0x04, |
| }; |
| |
| static const unsigned char SEQ_PWR_CTRL[] = { |
| 0xF4, 0x0A, 0x87, 0x25, 0x6A, 0x44, 0x02, 0x88, |
| }; |
| |
| static const unsigned char SEQ_SLPOUT[] = { |
| 0x11, |
| }; |
| |
| static const unsigned char SEQ_DISPON[] = { |
| 0x29, |
| }; |
| |
| static const unsigned char SEQ_DISPOFF[] = { |
| 0x28, |
| }; |
| |
| static void ld9040_spi_write(const unsigned char *wbuf, unsigned int size_cmd) |
| { |
| int i = 0; |
| |
| /* |
| * Data are transmitted in 9-bit words: |
| * the first bit is command/parameter, the other are the value. |
| * The value's LSB is shifted to MSB position, to be sent as 9th bit |
| */ |
| |
| unsigned int data_out = 0, data_in = 0; |
| for (i = 0; i < size_cmd; i++) { |
| data_out = wbuf[i] >> 1; |
| if (i != 0) |
| data_out += 0x0080; |
| if (wbuf[i] & 0x01) |
| data_out += 0x8000; |
| spi_xfer(NULL, 9, &data_out, &data_in, SPI_XFER_BEGIN); |
| } |
| } |
| |
| void ld9040_cfg_ldo(void) |
| { |
| udelay(10); |
| |
| ld9040_spi_write(SEQ_USER_SETTING, |
| ARRAY_SIZE(SEQ_USER_SETTING)); |
| ld9040_spi_write(SEQ_PANEL_CONDITION, |
| ARRAY_SIZE(SEQ_PANEL_CONDITION)); |
| ld9040_spi_write(SEQ_DISPCTL, ARRAY_SIZE(SEQ_DISPCTL)); |
| ld9040_spi_write(SEQ_MANPWR, ARRAY_SIZE(SEQ_MANPWR)); |
| ld9040_spi_write(SEQ_PWR_CTRL, ARRAY_SIZE(SEQ_PWR_CTRL)); |
| ld9040_spi_write(SEQ_ELVSS_ON, ARRAY_SIZE(SEQ_ELVSS_ON)); |
| ld9040_spi_write(SEQ_GTCON, ARRAY_SIZE(SEQ_GTCON)); |
| ld9040_spi_write(SEQ_GAMMA_SET1, ARRAY_SIZE(SEQ_GAMMA_SET1)); |
| ld9040_spi_write(SEQ_GAMMA_CTRL, ARRAY_SIZE(SEQ_GAMMA_CTRL)); |
| ld9040_spi_write(SEQ_SLPOUT, ARRAY_SIZE(SEQ_SLPOUT)); |
| |
| udelay(120); |
| } |
| |
| void ld9040_enable_ldo(unsigned int onoff) |
| { |
| if (onoff) |
| ld9040_spi_write(SEQ_DISPON, ARRAY_SIZE(SEQ_DISPON)); |
| else |
| ld9040_spi_write(SEQ_DISPOFF, ARRAY_SIZE(SEQ_DISPOFF)); |
| } |