| /* |
| * Copyright (C) 2015 Google, Inc |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| * |
| * Based on code from the coreboot file of the same name |
| */ |
| |
| #include <common.h> |
| #include <cpu.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <qemu_fw_cfg.h> |
| #include <asm/atomic.h> |
| #include <asm/cpu.h> |
| #include <asm/interrupt.h> |
| #include <asm/lapic.h> |
| #include <asm/microcode.h> |
| #include <asm/mp.h> |
| #include <asm/msr.h> |
| #include <asm/mtrr.h> |
| #include <asm/processor.h> |
| #include <asm/sipi.h> |
| #include <dm/device-internal.h> |
| #include <dm/uclass-internal.h> |
| #include <dm/lists.h> |
| #include <dm/root.h> |
| #include <linux/linkage.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* Total CPUs include BSP */ |
| static int num_cpus; |
| |
| /* This also needs to match the sipi.S assembly code for saved MSR encoding */ |
| struct saved_msr { |
| uint32_t index; |
| uint32_t lo; |
| uint32_t hi; |
| } __packed; |
| |
| |
| struct mp_flight_plan { |
| int num_records; |
| struct mp_flight_record *records; |
| }; |
| |
| static struct mp_flight_plan mp_info; |
| |
| struct cpu_map { |
| struct udevice *dev; |
| int apic_id; |
| int err_code; |
| }; |
| |
| static inline void barrier_wait(atomic_t *b) |
| { |
| while (atomic_read(b) == 0) |
| asm("pause"); |
| mfence(); |
| } |
| |
| static inline void release_barrier(atomic_t *b) |
| { |
| mfence(); |
| atomic_set(b, 1); |
| } |
| |
| static inline void stop_this_cpu(void) |
| { |
| /* Called by an AP when it is ready to halt and wait for a new task */ |
| for (;;) |
| cpu_hlt(); |
| } |
| |
| /* Returns 1 if timeout waiting for APs. 0 if target APs found */ |
| static int wait_for_aps(atomic_t *val, int target, int total_delay, |
| int delay_step) |
| { |
| int timeout = 0; |
| int delayed = 0; |
| |
| while (atomic_read(val) != target) { |
| udelay(delay_step); |
| delayed += delay_step; |
| if (delayed >= total_delay) { |
| timeout = 1; |
| break; |
| } |
| } |
| |
| return timeout; |
| } |
| |
| static void ap_do_flight_plan(struct udevice *cpu) |
| { |
| int i; |
| |
| for (i = 0; i < mp_info.num_records; i++) { |
| struct mp_flight_record *rec = &mp_info.records[i]; |
| |
| atomic_inc(&rec->cpus_entered); |
| barrier_wait(&rec->barrier); |
| |
| if (rec->ap_call != NULL) |
| rec->ap_call(cpu, rec->ap_arg); |
| } |
| } |
| |
| static int find_cpu_by_apic_id(int apic_id, struct udevice **devp) |
| { |
| struct udevice *dev; |
| |
| *devp = NULL; |
| for (uclass_find_first_device(UCLASS_CPU, &dev); |
| dev; |
| uclass_find_next_device(&dev)) { |
| struct cpu_platdata *plat = dev_get_parent_platdata(dev); |
| |
| if (plat->cpu_id == apic_id) { |
| *devp = dev; |
| return 0; |
| } |
| } |
| |
| return -ENOENT; |
| } |
| |
| /* |
| * By the time APs call ap_init() caching has been setup, and microcode has |
| * been loaded |
| */ |
| static void ap_init(unsigned int cpu_index) |
| { |
| struct udevice *dev; |
| int apic_id; |
| int ret; |
| |
| /* Ensure the local apic is enabled */ |
| enable_lapic(); |
| |
| apic_id = lapicid(); |
| ret = find_cpu_by_apic_id(apic_id, &dev); |
| if (ret) { |
| debug("Unknown CPU apic_id %x\n", apic_id); |
| goto done; |
| } |
| |
| debug("AP: slot %d apic_id %x, dev %s\n", cpu_index, apic_id, |
| dev ? dev->name : "(apic_id not found)"); |
| |
| /* Walk the flight plan */ |
| ap_do_flight_plan(dev); |
| |
| /* Park the AP */ |
| debug("parking\n"); |
| done: |
| stop_this_cpu(); |
| } |
| |
| static const unsigned int fixed_mtrrs[NUM_FIXED_MTRRS] = { |
| MTRR_FIX_64K_00000_MSR, MTRR_FIX_16K_80000_MSR, MTRR_FIX_16K_A0000_MSR, |
| MTRR_FIX_4K_C0000_MSR, MTRR_FIX_4K_C8000_MSR, MTRR_FIX_4K_D0000_MSR, |
| MTRR_FIX_4K_D8000_MSR, MTRR_FIX_4K_E0000_MSR, MTRR_FIX_4K_E8000_MSR, |
| MTRR_FIX_4K_F0000_MSR, MTRR_FIX_4K_F8000_MSR, |
| }; |
| |
| static inline struct saved_msr *save_msr(int index, struct saved_msr *entry) |
| { |
| msr_t msr; |
| |
| msr = msr_read(index); |
| entry->index = index; |
| entry->lo = msr.lo; |
| entry->hi = msr.hi; |
| |
| /* Return the next entry */ |
| entry++; |
| return entry; |
| } |
| |
| static int save_bsp_msrs(char *start, int size) |
| { |
| int msr_count; |
| int num_var_mtrrs; |
| struct saved_msr *msr_entry; |
| int i; |
| msr_t msr; |
| |
| /* Determine number of MTRRs need to be saved */ |
| msr = msr_read(MTRR_CAP_MSR); |
| num_var_mtrrs = msr.lo & 0xff; |
| |
| /* 2 * num_var_mtrrs for base and mask. +1 for IA32_MTRR_DEF_TYPE */ |
| msr_count = 2 * num_var_mtrrs + NUM_FIXED_MTRRS + 1; |
| |
| if ((msr_count * sizeof(struct saved_msr)) > size) { |
| printf("Cannot mirror all %d msrs\n", msr_count); |
| return -ENOSPC; |
| } |
| |
| msr_entry = (void *)start; |
| for (i = 0; i < NUM_FIXED_MTRRS; i++) |
| msr_entry = save_msr(fixed_mtrrs[i], msr_entry); |
| |
| for (i = 0; i < num_var_mtrrs; i++) { |
| msr_entry = save_msr(MTRR_PHYS_BASE_MSR(i), msr_entry); |
| msr_entry = save_msr(MTRR_PHYS_MASK_MSR(i), msr_entry); |
| } |
| |
| msr_entry = save_msr(MTRR_DEF_TYPE_MSR, msr_entry); |
| |
| return msr_count; |
| } |
| |
| static int load_sipi_vector(atomic_t **ap_countp, int num_cpus) |
| { |
| struct sipi_params_16bit *params16; |
| struct sipi_params *params; |
| static char msr_save[512]; |
| char *stack; |
| ulong addr; |
| int code_len; |
| int size; |
| int ret; |
| |
| /* Copy in the code */ |
| code_len = ap_start16_code_end - ap_start16; |
| debug("Copying SIPI code to %x: %d bytes\n", AP_DEFAULT_BASE, |
| code_len); |
| memcpy((void *)AP_DEFAULT_BASE, ap_start16, code_len); |
| |
| addr = AP_DEFAULT_BASE + (ulong)sipi_params_16bit - (ulong)ap_start16; |
| params16 = (struct sipi_params_16bit *)addr; |
| params16->ap_start = (uint32_t)ap_start; |
| params16->gdt = (uint32_t)gd->arch.gdt; |
| params16->gdt_limit = X86_GDT_SIZE - 1; |
| debug("gdt = %x, gdt_limit = %x\n", params16->gdt, params16->gdt_limit); |
| |
| params = (struct sipi_params *)sipi_params; |
| debug("SIPI 32-bit params at %p\n", params); |
| params->idt_ptr = (uint32_t)x86_get_idt(); |
| |
| params->stack_size = CONFIG_AP_STACK_SIZE; |
| size = params->stack_size * num_cpus; |
| stack = memalign(4096, size); |
| if (!stack) |
| return -ENOMEM; |
| params->stack_top = (u32)(stack + size); |
| #if !defined(CONFIG_QEMU) && !defined(CONFIG_HAVE_FSP) |
| params->microcode_ptr = ucode_base; |
| debug("Microcode at %x\n", params->microcode_ptr); |
| #endif |
| params->msr_table_ptr = (u32)msr_save; |
| ret = save_bsp_msrs(msr_save, sizeof(msr_save)); |
| if (ret < 0) |
| return ret; |
| params->msr_count = ret; |
| |
| params->c_handler = (uint32_t)&ap_init; |
| |
| *ap_countp = ¶ms->ap_count; |
| atomic_set(*ap_countp, 0); |
| debug("SIPI vector is ready\n"); |
| |
| return 0; |
| } |
| |
| static int check_cpu_devices(int expected_cpus) |
| { |
| int i; |
| |
| for (i = 0; i < expected_cpus; i++) { |
| struct udevice *dev; |
| int ret; |
| |
| ret = uclass_find_device(UCLASS_CPU, i, &dev); |
| if (ret) { |
| debug("Cannot find CPU %d in device tree\n", i); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Returns 1 for timeout. 0 on success */ |
| static int apic_wait_timeout(int total_delay, const char *msg) |
| { |
| int total = 0; |
| |
| if (!(lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY)) |
| return 0; |
| |
| debug("Waiting for %s...", msg); |
| while (lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY) { |
| udelay(50); |
| total += 50; |
| if (total >= total_delay) { |
| debug("timed out: aborting\n"); |
| return -ETIMEDOUT; |
| } |
| } |
| debug("done\n"); |
| |
| return 0; |
| } |
| |
| static int start_aps(int ap_count, atomic_t *num_aps) |
| { |
| int sipi_vector; |
| /* Max location is 4KiB below 1MiB */ |
| const int max_vector_loc = ((1 << 20) - (1 << 12)) >> 12; |
| |
| if (ap_count == 0) |
| return 0; |
| |
| /* The vector is sent as a 4k aligned address in one byte */ |
| sipi_vector = AP_DEFAULT_BASE >> 12; |
| |
| if (sipi_vector > max_vector_loc) { |
| printf("SIPI vector too large! 0x%08x\n", |
| sipi_vector); |
| return -1; |
| } |
| |
| debug("Attempting to start %d APs\n", ap_count); |
| |
| if (apic_wait_timeout(1000, "ICR not to be busy")) |
| return -ETIMEDOUT; |
| |
| /* Send INIT IPI to all but self */ |
| lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0)); |
| lapic_write(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT | |
| LAPIC_DM_INIT); |
| debug("Waiting for 10ms after sending INIT\n"); |
| mdelay(10); |
| |
| /* Send 1st SIPI */ |
| if (apic_wait_timeout(1000, "ICR not to be busy")) |
| return -ETIMEDOUT; |
| |
| lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0)); |
| lapic_write(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT | |
| LAPIC_DM_STARTUP | sipi_vector); |
| if (apic_wait_timeout(10000, "first SIPI to complete")) |
| return -ETIMEDOUT; |
| |
| /* Wait for CPUs to check in up to 200 us */ |
| wait_for_aps(num_aps, ap_count, 200, 15); |
| |
| /* Send 2nd SIPI */ |
| if (apic_wait_timeout(1000, "ICR not to be busy")) |
| return -ETIMEDOUT; |
| |
| lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0)); |
| lapic_write(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT | |
| LAPIC_DM_STARTUP | sipi_vector); |
| if (apic_wait_timeout(10000, "second SIPI to complete")) |
| return -ETIMEDOUT; |
| |
| /* Wait for CPUs to check in */ |
| if (wait_for_aps(num_aps, ap_count, 10000, 50)) { |
| debug("Not all APs checked in: %d/%d\n", |
| atomic_read(num_aps), ap_count); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int bsp_do_flight_plan(struct udevice *cpu, struct mp_params *mp_params) |
| { |
| int i; |
| int ret = 0; |
| const int timeout_us = 100000; |
| const int step_us = 100; |
| int num_aps = num_cpus - 1; |
| |
| for (i = 0; i < mp_params->num_records; i++) { |
| struct mp_flight_record *rec = &mp_params->flight_plan[i]; |
| |
| /* Wait for APs if the record is not released */ |
| if (atomic_read(&rec->barrier) == 0) { |
| /* Wait for the APs to check in */ |
| if (wait_for_aps(&rec->cpus_entered, num_aps, |
| timeout_us, step_us)) { |
| debug("MP record %d timeout\n", i); |
| ret = -1; |
| } |
| } |
| |
| if (rec->bsp_call != NULL) |
| rec->bsp_call(cpu, rec->bsp_arg); |
| |
| release_barrier(&rec->barrier); |
| } |
| return ret; |
| } |
| |
| static int init_bsp(struct udevice **devp) |
| { |
| char processor_name[CPU_MAX_NAME_LEN]; |
| int apic_id; |
| int ret; |
| |
| cpu_get_name(processor_name); |
| debug("CPU: %s\n", processor_name); |
| |
| lapic_setup(); |
| |
| apic_id = lapicid(); |
| ret = find_cpu_by_apic_id(apic_id, devp); |
| if (ret) { |
| printf("Cannot find boot CPU, APIC ID %d\n", apic_id); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_QEMU |
| static int qemu_cpu_fixup(void) |
| { |
| int ret; |
| int cpu_num; |
| int cpu_online; |
| struct udevice *dev, *pdev; |
| struct cpu_platdata *plat; |
| char *cpu; |
| |
| /* first we need to find '/cpus' */ |
| for (device_find_first_child(dm_root(), &pdev); |
| pdev; |
| device_find_next_child(&pdev)) { |
| if (!strcmp(pdev->name, "cpus")) |
| break; |
| } |
| if (!pdev) { |
| printf("unable to find cpus device\n"); |
| return -ENODEV; |
| } |
| |
| /* calculate cpus that are already bound */ |
| cpu_num = 0; |
| for (uclass_find_first_device(UCLASS_CPU, &dev); |
| dev; |
| uclass_find_next_device(&dev)) { |
| cpu_num++; |
| } |
| |
| /* get actual cpu number */ |
| cpu_online = qemu_fwcfg_online_cpus(); |
| if (cpu_online < 0) { |
| printf("unable to get online cpu number: %d\n", cpu_online); |
| return cpu_online; |
| } |
| |
| /* bind addtional cpus */ |
| dev = NULL; |
| for (; cpu_num < cpu_online; cpu_num++) { |
| /* |
| * allocate device name here as device_bind_driver() does |
| * not copy device name, 8 bytes are enough for |
| * sizeof("cpu@") + 3 digits cpu number + '\0' |
| */ |
| cpu = malloc(8); |
| if (!cpu) { |
| printf("unable to allocate device name\n"); |
| return -ENOMEM; |
| } |
| sprintf(cpu, "cpu@%d", cpu_num); |
| ret = device_bind_driver(pdev, "cpu_qemu", cpu, &dev); |
| if (ret) { |
| printf("binding cpu@%d failed: %d\n", cpu_num, ret); |
| return ret; |
| } |
| plat = dev_get_parent_platdata(dev); |
| plat->cpu_id = cpu_num; |
| } |
| return 0; |
| } |
| #endif |
| |
| int mp_init(struct mp_params *p) |
| { |
| int num_aps; |
| atomic_t *ap_count; |
| struct udevice *cpu; |
| int ret; |
| |
| /* This will cause the CPUs devices to be bound */ |
| struct uclass *uc; |
| ret = uclass_get(UCLASS_CPU, &uc); |
| if (ret) |
| return ret; |
| |
| #ifdef CONFIG_QEMU |
| ret = qemu_cpu_fixup(); |
| if (ret) |
| return ret; |
| #endif |
| |
| ret = init_bsp(&cpu); |
| if (ret) { |
| debug("Cannot init boot CPU: err=%d\n", ret); |
| return ret; |
| } |
| |
| if (p == NULL || p->flight_plan == NULL || p->num_records < 1) { |
| printf("Invalid MP parameters\n"); |
| return -1; |
| } |
| |
| num_cpus = cpu_get_count(cpu); |
| if (num_cpus < 0) { |
| debug("Cannot get number of CPUs: err=%d\n", num_cpus); |
| return num_cpus; |
| } |
| |
| if (num_cpus < 2) |
| debug("Warning: Only 1 CPU is detected\n"); |
| |
| ret = check_cpu_devices(num_cpus); |
| if (ret) |
| debug("Warning: Device tree does not describe all CPUs. Extra ones will not be started correctly\n"); |
| |
| /* Copy needed parameters so that APs have a reference to the plan */ |
| mp_info.num_records = p->num_records; |
| mp_info.records = p->flight_plan; |
| |
| /* Load the SIPI vector */ |
| ret = load_sipi_vector(&ap_count, num_cpus); |
| if (ap_count == NULL) |
| return -1; |
| |
| /* |
| * Make sure SIPI data hits RAM so the APs that come up will see |
| * the startup code even if the caches are disabled |
| */ |
| wbinvd(); |
| |
| /* Start the APs providing number of APs and the cpus_entered field */ |
| num_aps = num_cpus - 1; |
| ret = start_aps(num_aps, ap_count); |
| if (ret) { |
| mdelay(1000); |
| debug("%d/%d eventually checked in?\n", atomic_read(ap_count), |
| num_aps); |
| return ret; |
| } |
| |
| /* Walk the flight plan for the BSP */ |
| ret = bsp_do_flight_plan(cpu, p); |
| if (ret) { |
| debug("CPU init failed: err=%d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int mp_init_cpu(struct udevice *cpu, void *unused) |
| { |
| struct cpu_platdata *plat = dev_get_parent_platdata(cpu); |
| |
| /* |
| * Multiple APs are brought up simultaneously and they may get the same |
| * seq num in the uclass_resolve_seq() during device_probe(). To avoid |
| * this, set req_seq to the reg number in the device tree in advance. |
| */ |
| cpu->req_seq = fdtdec_get_int(gd->fdt_blob, cpu->of_offset, "reg", -1); |
| plat->ucode_version = microcode_read_rev(); |
| plat->device_id = gd->arch.x86_device; |
| |
| return device_probe(cpu); |
| } |