| /* |
| * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Andreas Heppel <aheppel@sysgo.de> |
| * |
| * (C) Copyright 2002, 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * PCI routines |
| */ |
| |
| #include <common.h> |
| |
| #include <command.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| |
| #define PCI_HOSE_OP(rw, size, type) \ |
| int pci_hose_##rw##_config_##size(struct pci_controller *hose, \ |
| pci_dev_t dev, \ |
| int offset, type value) \ |
| { \ |
| return hose->rw##_##size(hose, dev, offset, value); \ |
| } |
| |
| PCI_HOSE_OP(read, byte, u8 *) |
| PCI_HOSE_OP(read, word, u16 *) |
| PCI_HOSE_OP(read, dword, u32 *) |
| PCI_HOSE_OP(write, byte, u8) |
| PCI_HOSE_OP(write, word, u16) |
| PCI_HOSE_OP(write, dword, u32) |
| |
| #define PCI_OP(rw, size, type, error_code) \ |
| int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \ |
| { \ |
| struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \ |
| \ |
| if (!hose) \ |
| { \ |
| error_code; \ |
| return -1; \ |
| } \ |
| \ |
| return pci_hose_##rw##_config_##size(hose, dev, offset, value); \ |
| } |
| |
| PCI_OP(read, byte, u8 *, *value = 0xff) |
| PCI_OP(read, word, u16 *, *value = 0xffff) |
| PCI_OP(read, dword, u32 *, *value = 0xffffffff) |
| PCI_OP(write, byte, u8, ) |
| PCI_OP(write, word, u16, ) |
| PCI_OP(write, dword, u32, ) |
| |
| #define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \ |
| int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ |
| pci_dev_t dev, \ |
| int offset, type val) \ |
| { \ |
| u32 val32; \ |
| \ |
| if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \ |
| *val = -1; \ |
| return -1; \ |
| } \ |
| \ |
| *val = (val32 >> ((offset & (int)off_mask) * 8)); \ |
| \ |
| return 0; \ |
| } |
| |
| #define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \ |
| int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\ |
| pci_dev_t dev, \ |
| int offset, type val) \ |
| { \ |
| u32 val32, mask, ldata, shift; \ |
| \ |
| if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ |
| return -1; \ |
| \ |
| shift = ((offset & (int)off_mask) * 8); \ |
| ldata = (((unsigned long)val) & val_mask) << shift; \ |
| mask = val_mask << shift; \ |
| val32 = (val32 & ~mask) | ldata; \ |
| \ |
| if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\ |
| return -1; \ |
| \ |
| return 0; \ |
| } |
| |
| PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03) |
| PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02) |
| PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff) |
| PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff) |
| |
| /* Get a virtual address associated with a BAR region */ |
| void *pci_map_bar(pci_dev_t pdev, int bar, int flags) |
| { |
| pci_addr_t pci_bus_addr; |
| pci_addr_t bar_response; |
| |
| /* read BAR address */ |
| pci_read_config_dword(pdev, bar, &bar_response); |
| pci_bus_addr = bar_response & ~0xf; |
| |
| /* |
| * Pass "0" as the length argument to pci_bus_to_virt. The arg |
| * isn't actualy used on any platform because u-boot assumes a static |
| * linear mapping. In the future, this could read the BAR size |
| * and pass that as the size if needed. |
| */ |
| return pci_bus_to_virt(pdev, pci_bus_addr, flags, 0, MAP_NOCACHE); |
| } |
| |
| /* |
| * |
| */ |
| |
| static struct pci_controller* hose_head; |
| |
| void pci_register_hose(struct pci_controller* hose) |
| { |
| struct pci_controller **phose = &hose_head; |
| |
| while(*phose) |
| phose = &(*phose)->next; |
| |
| hose->next = NULL; |
| |
| *phose = hose; |
| } |
| |
| struct pci_controller *pci_bus_to_hose(int bus) |
| { |
| struct pci_controller *hose; |
| |
| for (hose = hose_head; hose; hose = hose->next) { |
| if (bus >= hose->first_busno && bus <= hose->last_busno) |
| return hose; |
| } |
| |
| printf("pci_bus_to_hose() failed\n"); |
| return NULL; |
| } |
| |
| struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr) |
| { |
| struct pci_controller *hose; |
| |
| for (hose = hose_head; hose; hose = hose->next) { |
| if (hose->cfg_addr == cfg_addr) |
| return hose; |
| } |
| |
| return NULL; |
| } |
| |
| int pci_last_busno(void) |
| { |
| struct pci_controller *hose = hose_head; |
| |
| if (!hose) |
| return -1; |
| |
| while (hose->next) |
| hose = hose->next; |
| |
| return hose->last_busno; |
| } |
| |
| pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) |
| { |
| struct pci_controller * hose; |
| u16 vendor, device; |
| u8 header_type; |
| pci_dev_t bdf; |
| int i, bus, found_multi = 0; |
| |
| for (hose = hose_head; hose; hose = hose->next) { |
| #ifdef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE |
| for (bus = hose->last_busno; bus >= hose->first_busno; bus--) |
| #else |
| for (bus = hose->first_busno; bus <= hose->last_busno; bus++) |
| #endif |
| for (bdf = PCI_BDF(bus, 0, 0); |
| #if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX) |
| bdf < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1, |
| PCI_MAX_PCI_FUNCTIONS - 1); |
| #else |
| bdf < PCI_BDF(bus + 1, 0, 0); |
| #endif |
| bdf += PCI_BDF(0, 0, 1)) { |
| if (!PCI_FUNC(bdf)) { |
| pci_read_config_byte(bdf, |
| PCI_HEADER_TYPE, |
| &header_type); |
| |
| found_multi = header_type & 0x80; |
| } else { |
| if (!found_multi) |
| continue; |
| } |
| |
| pci_read_config_word(bdf, |
| PCI_VENDOR_ID, |
| &vendor); |
| pci_read_config_word(bdf, |
| PCI_DEVICE_ID, |
| &device); |
| |
| for (i = 0; ids[i].vendor != 0; i++) { |
| if (vendor == ids[i].vendor && |
| device == ids[i].device) { |
| if (index <= 0) |
| return bdf; |
| |
| index--; |
| } |
| } |
| } |
| } |
| |
| return -1; |
| } |
| |
| pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index) |
| { |
| static struct pci_device_id ids[2] = {{}, {0, 0}}; |
| |
| ids[0].vendor = vendor; |
| ids[0].device = device; |
| |
| return pci_find_devices(ids, index); |
| } |
| |
| /* |
| * |
| */ |
| |
| int __pci_hose_phys_to_bus(struct pci_controller *hose, |
| phys_addr_t phys_addr, |
| unsigned long flags, |
| unsigned long skip_mask, |
| pci_addr_t *ba) |
| { |
| struct pci_region *res; |
| pci_addr_t bus_addr; |
| int i; |
| |
| for (i = 0; i < hose->region_count; i++) { |
| res = &hose->regions[i]; |
| |
| if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) |
| continue; |
| |
| if (res->flags & skip_mask) |
| continue; |
| |
| bus_addr = phys_addr - res->phys_start + res->bus_start; |
| |
| if (bus_addr >= res->bus_start && |
| bus_addr < res->bus_start + res->size) { |
| *ba = bus_addr; |
| return 0; |
| } |
| } |
| |
| return 1; |
| } |
| |
| pci_addr_t pci_hose_phys_to_bus (struct pci_controller *hose, |
| phys_addr_t phys_addr, |
| unsigned long flags) |
| { |
| pci_addr_t bus_addr = 0; |
| int ret; |
| |
| if (!hose) { |
| puts("pci_hose_phys_to_bus: invalid hose\n"); |
| return bus_addr; |
| } |
| |
| /* |
| * if PCI_REGION_MEM is set we do a two pass search with preference |
| * on matches that don't have PCI_REGION_SYS_MEMORY set |
| */ |
| if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) { |
| ret = __pci_hose_phys_to_bus(hose, phys_addr, |
| flags, PCI_REGION_SYS_MEMORY, &bus_addr); |
| if (!ret) |
| return bus_addr; |
| } |
| |
| ret = __pci_hose_phys_to_bus(hose, phys_addr, flags, 0, &bus_addr); |
| |
| if (ret) |
| puts("pci_hose_phys_to_bus: invalid physical address\n"); |
| |
| return bus_addr; |
| } |
| |
| int __pci_hose_bus_to_phys(struct pci_controller *hose, |
| pci_addr_t bus_addr, |
| unsigned long flags, |
| unsigned long skip_mask, |
| phys_addr_t *pa) |
| { |
| struct pci_region *res; |
| int i; |
| |
| for (i = 0; i < hose->region_count; i++) { |
| res = &hose->regions[i]; |
| |
| if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) |
| continue; |
| |
| if (res->flags & skip_mask) |
| continue; |
| |
| if (bus_addr >= res->bus_start && |
| bus_addr < res->bus_start + res->size) { |
| *pa = (bus_addr - res->bus_start + res->phys_start); |
| return 0; |
| } |
| } |
| |
| return 1; |
| } |
| |
| phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose, |
| pci_addr_t bus_addr, |
| unsigned long flags) |
| { |
| phys_addr_t phys_addr = 0; |
| int ret; |
| |
| if (!hose) { |
| puts("pci_hose_bus_to_phys: invalid hose\n"); |
| return phys_addr; |
| } |
| |
| /* |
| * if PCI_REGION_MEM is set we do a two pass search with preference |
| * on matches that don't have PCI_REGION_SYS_MEMORY set |
| */ |
| if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) { |
| ret = __pci_hose_bus_to_phys(hose, bus_addr, |
| flags, PCI_REGION_SYS_MEMORY, &phys_addr); |
| if (!ret) |
| return phys_addr; |
| } |
| |
| ret = __pci_hose_bus_to_phys(hose, bus_addr, flags, 0, &phys_addr); |
| |
| if (ret) |
| puts("pci_hose_bus_to_phys: invalid physical address\n"); |
| |
| return phys_addr; |
| } |
| |
| /* |
| * |
| */ |
| |
| int pci_hose_config_device(struct pci_controller *hose, |
| pci_dev_t dev, |
| unsigned long io, |
| pci_addr_t mem, |
| unsigned long command) |
| { |
| pci_addr_t bar_response; |
| unsigned int old_command; |
| pci_addr_t bar_value; |
| pci_size_t bar_size; |
| unsigned char pin; |
| int bar, found_mem64; |
| |
| debug("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n", io, |
| (u64)mem, command); |
| |
| pci_hose_write_config_dword(hose, dev, PCI_COMMAND, 0); |
| |
| for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) { |
| pci_hose_write_config_dword(hose, dev, bar, 0xffffffff); |
| pci_hose_read_config_dword(hose, dev, bar, &bar_response); |
| |
| if (!bar_response) |
| continue; |
| |
| found_mem64 = 0; |
| |
| /* Check the BAR type and set our address mask */ |
| if (bar_response & PCI_BASE_ADDRESS_SPACE) { |
| bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1; |
| /* round up region base address to a multiple of size */ |
| io = ((io - 1) | (bar_size - 1)) + 1; |
| bar_value = io; |
| /* compute new region base address */ |
| io = io + bar_size; |
| } else { |
| if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == |
| PCI_BASE_ADDRESS_MEM_TYPE_64) { |
| u32 bar_response_upper; |
| u64 bar64; |
| pci_hose_write_config_dword(hose, dev, bar + 4, |
| 0xffffffff); |
| pci_hose_read_config_dword(hose, dev, bar + 4, |
| &bar_response_upper); |
| |
| bar64 = ((u64)bar_response_upper << 32) | bar_response; |
| |
| bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1; |
| found_mem64 = 1; |
| } else { |
| bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1); |
| } |
| |
| /* round up region base address to multiple of size */ |
| mem = ((mem - 1) | (bar_size - 1)) + 1; |
| bar_value = mem; |
| /* compute new region base address */ |
| mem = mem + bar_size; |
| } |
| |
| /* Write it out and update our limit */ |
| pci_hose_write_config_dword (hose, dev, bar, (u32)bar_value); |
| |
| if (found_mem64) { |
| bar += 4; |
| #ifdef CONFIG_SYS_PCI_64BIT |
| pci_hose_write_config_dword(hose, dev, bar, |
| (u32)(bar_value >> 32)); |
| #else |
| pci_hose_write_config_dword(hose, dev, bar, 0x00000000); |
| #endif |
| } |
| } |
| |
| /* Configure Cache Line Size Register */ |
| pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); |
| |
| /* Configure Latency Timer */ |
| pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); |
| |
| /* Disable interrupt line, if device says it wants to use interrupts */ |
| pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin); |
| if (pin != 0) { |
| pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 0xff); |
| } |
| |
| pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &old_command); |
| pci_hose_write_config_dword(hose, dev, PCI_COMMAND, |
| (old_command & 0xffff0000) | command); |
| |
| return 0; |
| } |
| |
| /* |
| * |
| */ |
| |
| struct pci_config_table *pci_find_config(struct pci_controller *hose, |
| unsigned short class, |
| unsigned int vendor, |
| unsigned int device, |
| unsigned int bus, |
| unsigned int dev, |
| unsigned int func) |
| { |
| struct pci_config_table *table; |
| |
| for (table = hose->config_table; table && table->vendor; table++) { |
| if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) && |
| (table->device == PCI_ANY_ID || table->device == device) && |
| (table->class == PCI_ANY_ID || table->class == class) && |
| (table->bus == PCI_ANY_ID || table->bus == bus) && |
| (table->dev == PCI_ANY_ID || table->dev == dev) && |
| (table->func == PCI_ANY_ID || table->func == func)) { |
| return table; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void pci_cfgfunc_config_device(struct pci_controller *hose, |
| pci_dev_t dev, |
| struct pci_config_table *entry) |
| { |
| pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], |
| entry->priv[2]); |
| } |
| |
| void pci_cfgfunc_do_nothing(struct pci_controller *hose, |
| pci_dev_t dev, struct pci_config_table *entry) |
| { |
| } |
| |
| /* |
| * HJF: Changed this to return int. I think this is required |
| * to get the correct result when scanning bridges |
| */ |
| extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); |
| |
| #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI_SCAN_SHOW) |
| const char * pci_class_str(u8 class) |
| { |
| switch (class) { |
| case PCI_CLASS_NOT_DEFINED: |
| return "Build before PCI Rev2.0"; |
| break; |
| case PCI_BASE_CLASS_STORAGE: |
| return "Mass storage controller"; |
| break; |
| case PCI_BASE_CLASS_NETWORK: |
| return "Network controller"; |
| break; |
| case PCI_BASE_CLASS_DISPLAY: |
| return "Display controller"; |
| break; |
| case PCI_BASE_CLASS_MULTIMEDIA: |
| return "Multimedia device"; |
| break; |
| case PCI_BASE_CLASS_MEMORY: |
| return "Memory controller"; |
| break; |
| case PCI_BASE_CLASS_BRIDGE: |
| return "Bridge device"; |
| break; |
| case PCI_BASE_CLASS_COMMUNICATION: |
| return "Simple comm. controller"; |
| break; |
| case PCI_BASE_CLASS_SYSTEM: |
| return "Base system peripheral"; |
| break; |
| case PCI_BASE_CLASS_INPUT: |
| return "Input device"; |
| break; |
| case PCI_BASE_CLASS_DOCKING: |
| return "Docking station"; |
| break; |
| case PCI_BASE_CLASS_PROCESSOR: |
| return "Processor"; |
| break; |
| case PCI_BASE_CLASS_SERIAL: |
| return "Serial bus controller"; |
| break; |
| case PCI_BASE_CLASS_INTELLIGENT: |
| return "Intelligent controller"; |
| break; |
| case PCI_BASE_CLASS_SATELLITE: |
| return "Satellite controller"; |
| break; |
| case PCI_BASE_CLASS_CRYPT: |
| return "Cryptographic device"; |
| break; |
| case PCI_BASE_CLASS_SIGNAL_PROCESSING: |
| return "DSP"; |
| break; |
| case PCI_CLASS_OTHERS: |
| return "Does not fit any class"; |
| break; |
| default: |
| return "???"; |
| break; |
| }; |
| } |
| #endif /* CONFIG_CMD_PCI || CONFIG_PCI_SCAN_SHOW */ |
| |
| int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) |
| { |
| /* |
| * Check if pci device should be skipped in configuration |
| */ |
| if (dev == PCI_BDF(hose->first_busno, 0, 0)) { |
| #if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */ |
| /* |
| * Only skip configuration if "pciconfighost" is not set |
| */ |
| if (getenv("pciconfighost") == NULL) |
| return 1; |
| #else |
| return 1; |
| #endif |
| } |
| |
| return 0; |
| } |
| int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) |
| __attribute__((weak, alias("__pci_skip_dev"))); |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| int __pci_print_dev(struct pci_controller *hose, pci_dev_t dev) |
| { |
| if (dev == PCI_BDF(hose->first_busno, 0, 0)) |
| return 0; |
| |
| return 1; |
| } |
| int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) |
| __attribute__((weak, alias("__pci_print_dev"))); |
| #endif /* CONFIG_PCI_SCAN_SHOW */ |
| |
| int pci_hose_scan_bus(struct pci_controller *hose, int bus) |
| { |
| unsigned int sub_bus, found_multi = 0; |
| unsigned short vendor, device, class; |
| unsigned char header_type; |
| #ifndef CONFIG_PCI_PNP |
| struct pci_config_table *cfg; |
| #endif |
| pci_dev_t dev; |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| static int indent = 0; |
| #endif |
| |
| sub_bus = bus; |
| |
| for (dev = PCI_BDF(bus,0,0); |
| dev < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1, |
| PCI_MAX_PCI_FUNCTIONS - 1); |
| dev += PCI_BDF(0, 0, 1)) { |
| |
| if (pci_skip_dev(hose, dev)) |
| continue; |
| |
| if (PCI_FUNC(dev) && !found_multi) |
| continue; |
| |
| pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); |
| |
| pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); |
| |
| if (vendor == 0xffff || vendor == 0x0000) |
| continue; |
| |
| if (!PCI_FUNC(dev)) |
| found_multi = header_type & 0x80; |
| |
| debug("PCI Scan: Found Bus %d, Device %d, Function %d\n", |
| PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); |
| |
| pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device); |
| pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| indent++; |
| |
| /* Print leading space, including bus indentation */ |
| printf("%*c", indent + 1, ' '); |
| |
| if (pci_print_dev(hose, dev)) { |
| printf("%02x:%02x.%-*x - %04x:%04x - %s\n", |
| PCI_BUS(dev), PCI_DEV(dev), 6 - indent, PCI_FUNC(dev), |
| vendor, device, pci_class_str(class >> 8)); |
| } |
| #endif |
| |
| #ifdef CONFIG_PCI_PNP |
| sub_bus = max(pciauto_config_device(hose, dev), sub_bus); |
| #else |
| cfg = pci_find_config(hose, class, vendor, device, |
| PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); |
| if (cfg) { |
| cfg->config_device(hose, dev, cfg); |
| sub_bus = max(sub_bus, hose->current_busno); |
| } |
| #endif |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| indent--; |
| #endif |
| |
| if (hose->fixup_irq) |
| hose->fixup_irq(hose, dev); |
| } |
| |
| return sub_bus; |
| } |
| |
| int pci_hose_scan(struct pci_controller *hose) |
| { |
| #if defined(CONFIG_PCI_BOOTDELAY) |
| static int pcidelay_done; |
| char *s; |
| int i; |
| |
| if (!pcidelay_done) { |
| /* wait "pcidelay" ms (if defined)... */ |
| s = getenv("pcidelay"); |
| if (s) { |
| int val = simple_strtoul(s, NULL, 10); |
| for (i = 0; i < val; i++) |
| udelay(1000); |
| } |
| pcidelay_done = 1; |
| } |
| #endif /* CONFIG_PCI_BOOTDELAY */ |
| |
| /* |
| * Start scan at current_busno. |
| * PCIe will start scan at first_busno+1. |
| */ |
| /* For legacy support, ensure current >= first */ |
| if (hose->first_busno > hose->current_busno) |
| hose->current_busno = hose->first_busno; |
| #ifdef CONFIG_PCI_PNP |
| pciauto_config_init(hose); |
| #endif |
| return pci_hose_scan_bus(hose, hose->current_busno); |
| } |
| |
| void pci_init(void) |
| { |
| hose_head = NULL; |
| |
| /* now call board specific pci_init()... */ |
| pci_init_board(); |
| } |