| CONFIG_ARM=y |
| CONFIG_ARCH_MX5=y |
| CONFIG_SYS_TEXT_BASE=0x77800000 |
| CONFIG_SYS_MALLOC_LEN=0xa00000 |
| CONFIG_NR_DRAM_BANKS=1 |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_ENV_OFFSET=0x60000 |
| CONFIG_TARGET_USBARMORY=y |
| CONFIG_SYS_I2C_MXC_I2C1=y |
| CONFIG_SYS_I2C_MXC_I2C2=y |
| CONFIG_DM_GPIO=y |
| CONFIG_DEFAULT_DEVICE_TREE="imx53-usbarmory" |
| # CONFIG_CMD_BMODE is not set |
| CONFIG_SYS_LOAD_ADDR=0x72000000 |
| CONFIG_SYS_MEMTEST_START=0x70000000 |
| CONFIG_SYS_MEMTEST_END=0x90000000 |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_BOOTCOMMAND="run distro_bootcmd; setenv bootargs console=${console} ${bootargs_default}; ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; bootz ${kernel_addr_r} - ${fdt_addr_r}" |
| CONFIG_SYS_PBSIZE=532 |
| CONFIG_CMD_MEMTEST=y |
| CONFIG_CMD_FUSE=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| # CONFIG_CMD_PINMUX is not set |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_OF_CONTROL=y |
| CONFIG_ENV_IS_IN_MMC=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_DM=y |
| CONFIG_SYS_I2C_LEGACY=y |
| CONFIG_SYS_I2C_MXC=y |
| CONFIG_FSL_ESDHC_IMX=y |
| CONFIG_MTD=y |
| CONFIG_DM_ETH=y |
| CONFIG_PINCTRL=y |
| CONFIG_PINCTRL_IMX5=y |
| CONFIG_DM_REGULATOR=y |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_DM_REGULATOR_GPIO=y |
| CONFIG_MXC_UART=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_MX5=y |