cpu/mpc86xx/speed.c

/*
 * Copyright 2004 Freescale Semiconductor.
 * Jeff Brown (jeffrey@freescale.com)
 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
 *
 * (C) Copyright 2000-2002
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <mpc86xx.h>
#include <asm/processor.h>

unsigned long get_board_sys_clk(ulong dummy);
unsigned long get_sysclk_from_px_regs(void);


/* --------------------------------------------------------------- */

void get_sys_info (sys_info_t * sysInfo)
{
	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
	volatile ccsr_gur_t *gur = &immap->im_gur;
	uint plat_ratio, e600_ratio;

       	plat_ratio = (gur->porpllsr) & 0x0000003e;
	plat_ratio >>= 1;
	
	switch(plat_ratio) {
        case 0x0:
		sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
		break;
	case 0x02:
	case 0x03:
	case 0x04:
	case 0x05:
	case 0x06:
	case 0x08:
	case 0x09:
	case 0x0a:
	case 0x0c:
        case 0x10:
                sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
      	        break;
	default:
	        sysInfo->freqSystemBus = 0;
		break;
	}

        //        printf("assigned system bus freq = %d for plat ratio 0x%08lx\n", sysInfo->freqSystemBus, plat_ratio);
	e600_ratio = (gur->porpllsr) & 0x003f0000;
	e600_ratio >>= 16;
	switch(e600_ratio) {     
	case 0x10:
		sysInfo->freqProcessor = 2*sysInfo->freqSystemBus;
		break;
        case 0x19:                
		sysInfo->freqProcessor = 5*sysInfo->freqSystemBus/2;
		break;
	case 0x20:
		sysInfo->freqProcessor = 3*sysInfo->freqSystemBus;
		break;
        case 0x39:
		sysInfo->freqProcessor = 7*sysInfo->freqSystemBus/2;
		break;
	case 0x28:
		sysInfo->freqProcessor = 4*sysInfo->freqSystemBus;
		break;
	case 0x1d:
		sysInfo->freqProcessor = 9*sysInfo->freqSystemBus/2;
		break;
       	default:
	  /* JB - Emulator workaround until real cop is plugged in */
	  sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
	  //sysInfo->freqProcessor = 3*sysInfo->freqSystemBus;
		break;
	}
        //        printf("assigned processor freq = %d for e600 ratio 0x%08lx\n", sysInfo->freqProcessor, e600_ratio);

}


/* ------------------------------------------------------------------------- */

/*
 * Measure CPU clock speed (core clock GCLK1, GCLK2)
 *
 * (Approx. GCLK frequency in Hz)
 */

int get_clocks (void)
{
	DECLARE_GLOBAL_DATA_PTR;
	sys_info_t sys_info;

	get_sys_info (&sys_info);
	gd->cpu_clk = sys_info.freqProcessor;
	gd->bus_clk = sys_info.freqSystemBus;
	
	if(gd->cpu_clk != 0) return (0);
	else return (1);
}

/* ------------------------------------------------------------------------- */
/********************************************
 * get_bus_freq
 * return system bus freq in Hz
 *********************************************/
ulong get_bus_freq (ulong dummy)
{
	ulong val;

	sys_info_t sys_info;

	get_sys_info (&sys_info);
	val = sys_info.freqSystemBus;

	return val;
}

unsigned long get_sysclk_from_px_regs()
{
   ulong val;
   u8 vclkh,vclkl;
   
   vclkh = in8(PIXIS_BASE+PIXIS_VCLKH);
   vclkl = in8(PIXIS_BASE+PIXIS_VCLKL);
   
   if((vclkh == 0x84) && (vclkl ==0x07))
   {
      val = 33000000;
   }
   if((vclkh == 0x3F) && (vclkl ==0x20))
   {
      val = 40000000;
   }
   if((vclkh == 0x3F) && (vclkl ==0x2A))
   {
      val = 50000000;
   }
   if((vclkh == 0x24) && (vclkl ==0x04))
   {
      val = 66000000;
   }
   if((vclkh == 0x3F) && (vclkl ==0x4B))
   {
      val = 83000000;
   }
   if((vclkh == 0x3F) && (vclkl ==0x5C))
   {
      val = 100000000;
   }
   if((vclkh == 0xDF) && (vclkl ==0x3B))
   {
      val = 134000000;
   }
   if((vclkh == 0xDF) && (vclkl ==0x4B))
   {
      val = 166000000;
   }
   
   return val;
}

/******* From MPC8641HPCN Design Workbook ************
 *
 * get_board_sys_clk
 * reads the FPGA on board for CONFIG_SYS_CLK_FREQ
 *
 ********************************************************/

unsigned long get_board_sys_clk(ulong dummy)
{
   u8 i, go_bit, rd_clks;
   ulong val;

   go_bit = in8(PIXIS_BASE+PIXIS_VCTL);
   go_bit &= 0x01;

   rd_clks = in8(PIXIS_BASE+PIXIS_VCFGEN0);
   rd_clks &= 0x1C;

   /* Only if both go bit and the SCLK bit in VCFGEN0 are set
    * should we be using the AUX register. Remember, we also set the
    * GO bit to boot from the alternate bank on the on-board flash
    */
   
   if(go_bit)
   {
      if(rd_clks == 0x1c)
         i = in8(PIXIS_BASE+PIXIS_AUX);
      else
         i = in8(PIXIS_BASE+PIXIS_SPD);
      //val = get_sysclk_from_px_regs();
   }
   else
      i = in8(PIXIS_BASE+PIXIS_SPD);
   
   i &= 0x07;
      
   switch(i)
   {
      case 0:
         val = 33000000;
         break;
      case 1:
         val = 40000000;
         break;
      case 2:
         val = 50000000;
         break;
      case 3:
         val = 66000000;
         break;
      case 4:
         val = 83000000;
         break;
      case 5:
         val = 100000000;
         break;
      case 6:
         val = 134000000;
         break;
      case 7:
         val = 166000000;
         break;
   }
   
   return val;
}