| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018, STMicroelectronics - All Rights Reserved |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <dm/pinctrl.h> |
| #include <dm/uclass-internal.h> |
| |
| #define LIMIT_DEVNAME 30 |
| |
| static struct udevice *currdev; |
| |
| static int do_dev(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| const char *name; |
| int ret; |
| |
| switch (argc) { |
| case 2: |
| name = argv[1]; |
| ret = uclass_get_device_by_name(UCLASS_PINCTRL, name, &currdev); |
| if (ret) { |
| printf("Can't get the pin-controller: %s!\n", name); |
| return CMD_RET_FAILURE; |
| } |
| /* fall through */ |
| case 1: |
| if (!currdev) { |
| printf("Pin-controller device is not set!\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| printf("dev: %s\n", currdev->name); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| /** |
| * Print the muxing information for one or all pins of one pinctrl device |
| * |
| * @param dev pinctrl device |
| * @param name NULL to display all the pins |
| * or name of the pin to display |
| * @return 0 on success, non-0 on error |
| */ |
| static int show_pinmux(struct udevice *dev, char *name) |
| { |
| char pin_name[PINNAME_SIZE]; |
| char pin_mux[PINMUX_SIZE]; |
| int pins_count; |
| int i; |
| int ret; |
| bool found = false; |
| |
| pins_count = pinctrl_get_pins_count(dev); |
| |
| if (pins_count == -ENOSYS) { |
| printf("Ops get_pins_count not supported by %s\n", dev->name); |
| return pins_count; |
| } |
| |
| for (i = 0; i < pins_count; i++) { |
| ret = pinctrl_get_pin_name(dev, i, pin_name, PINNAME_SIZE); |
| if (ret) { |
| printf("Ops get_pin_name error (%d) by %s\n", ret, dev->name); |
| return ret; |
| } |
| if (name && strcmp(name, pin_name)) |
| continue; |
| found = true; |
| ret = pinctrl_get_pin_muxing(dev, i, pin_mux, PINMUX_SIZE); |
| if (ret) { |
| printf("Ops get_pin_muxing error (%d) by %s in %s\n", |
| ret, pin_name, dev->name); |
| return ret; |
| } |
| |
| printf("%-*s: %-*s\n", PINNAME_SIZE, pin_name, |
| PINMUX_SIZE, pin_mux); |
| } |
| |
| if (!found) |
| return -ENOENT; |
| |
| return 0; |
| } |
| |
| static int do_status(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct udevice *dev; |
| char *name; |
| int ret; |
| |
| if (argc < 2) { |
| if (!currdev) { |
| printf("pin-controller device not selected\n"); |
| return CMD_RET_FAILURE; |
| } |
| show_pinmux(currdev, NULL); |
| return CMD_RET_SUCCESS; |
| } |
| |
| if (strcmp(argv[1], "-a")) |
| name = argv[1]; |
| else |
| name = NULL; |
| |
| uclass_foreach_dev_probe(UCLASS_PINCTRL, dev) { |
| if (!name) { |
| /* insert a separator between each pin-controller display */ |
| printf("--------------------------\n"); |
| printf("%s:\n", dev->name); |
| } |
| ret = show_pinmux(dev, name); |
| /* stop when the status of requested pin is displayed */ |
| if (name && !ret) |
| return CMD_RET_SUCCESS; |
| } |
| |
| if (name) { |
| printf("%s not found\n", name); |
| return CMD_RET_FAILURE; |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_list(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct udevice *dev; |
| |
| printf("| %-*.*s| %-*.*s| %s\n", |
| LIMIT_DEVNAME, LIMIT_DEVNAME, "Device", |
| LIMIT_DEVNAME, LIMIT_DEVNAME, "Driver", |
| "Parent"); |
| |
| uclass_foreach_dev_probe(UCLASS_PINCTRL, dev) { |
| printf("| %-*.*s| %-*.*s| %s\n", |
| LIMIT_DEVNAME, LIMIT_DEVNAME, dev->name, |
| LIMIT_DEVNAME, LIMIT_DEVNAME, dev->driver->name, |
| dev->parent->name); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static struct cmd_tbl pinmux_subcmd[] = { |
| U_BOOT_CMD_MKENT(dev, 2, 1, do_dev, "", ""), |
| U_BOOT_CMD_MKENT(list, 1, 1, do_list, "", ""), |
| U_BOOT_CMD_MKENT(status, 2, 1, do_status, "", ""), |
| }; |
| |
| static int do_pinmux(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct cmd_tbl *cmd; |
| |
| argc--; |
| argv++; |
| |
| cmd = find_cmd_tbl(argv[0], pinmux_subcmd, ARRAY_SIZE(pinmux_subcmd)); |
| if (!cmd || argc > cmd->maxargs) |
| return CMD_RET_USAGE; |
| |
| return cmd->cmd(cmdtp, flag, argc, argv); |
| } |
| |
| U_BOOT_CMD(pinmux, CONFIG_SYS_MAXARGS, 1, do_pinmux, |
| "show pin-controller muxing", |
| "list - list UCLASS_PINCTRL devices\n" |
| "pinmux dev [pincontroller-name] - select pin-controller device\n" |
| "pinmux status [-a | pin-name] - print pin-controller muxing [for all | for pin-name]\n" |
| ) |