| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Helpers for ACPI table generation |
| * |
| * Based on acpi.c from coreboot |
| * |
| * Copyright 2019 Google LLC |
| * |
| * Copyright (C) 2015, Saket Sinha <saket.sinha89@gmail.com> |
| * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com> |
| */ |
| |
| #ifndef __ACPI_TABLE_H__ |
| #define __ACPI_TABLE_H__ |
| |
| #include <dm/acpi.h> |
| |
| #define RSDP_SIG "RSD PTR " /* RSDP pointer signature */ |
| #define OEM_ID "U-BOOT" /* U-Boot */ |
| #define OEM_TABLE_ID "U-BOOTBL" /* U-Boot Table */ |
| #define ASLC_ID "INTL" /* Intel ASL Compiler */ |
| |
| /* TODO(sjg@chromium.org): Figure out how to get compiler revision */ |
| #define ASL_REVISION 0 |
| |
| #define ACPI_RSDP_REV_ACPI_1_0 0 |
| #define ACPI_RSDP_REV_ACPI_2_0 2 |
| |
| #if !defined(__ACPI__) |
| |
| #include <linux/bitops.h> |
| |
| struct acpi_ctx; |
| |
| /* |
| * RSDP (Root System Description Pointer) |
| * Note: ACPI 1.0 didn't have length, xsdt_address, and ext_checksum |
| */ |
| struct acpi_rsdp { |
| char signature[8]; /* RSDP signature */ |
| u8 checksum; /* Checksum of the first 20 bytes */ |
| char oem_id[6]; /* OEM ID */ |
| u8 revision; /* 0 for ACPI 1.0, others 2 */ |
| u32 rsdt_address; /* Physical address of RSDT (32 bits) */ |
| u32 length; /* Total RSDP length (incl. extended part) */ |
| u64 xsdt_address; /* Physical address of XSDT (64 bits) */ |
| u8 ext_checksum; /* Checksum of the whole table */ |
| u8 reserved[3]; |
| }; |
| |
| /* Generic ACPI header, provided by (almost) all tables */ |
| struct __packed acpi_table_header { |
| char signature[ACPI_NAME_LEN]; /* ACPI signature (4 ASCII chars) */ |
| u32 length; /* Table length in bytes (incl. header) */ |
| u8 revision; /* Table version (not ACPI version!) */ |
| volatile u8 checksum; /* To make sum of entire table == 0 */ |
| char oem_id[6]; /* OEM identification */ |
| char oem_table_id[8]; /* OEM table identification */ |
| u32 oem_revision; /* OEM revision number */ |
| char aslc_id[4]; /* ASL compiler vendor ID */ |
| u32 aslc_revision; /* ASL compiler revision number */ |
| }; |
| |
| struct acpi_gen_regaddr { |
| u8 space_id; /* Address space ID */ |
| u8 bit_width; /* Register size in bits */ |
| u8 bit_offset; /* Register bit offset */ |
| u8 access_size; /* Access size */ |
| u32 addrl; /* Register address, low 32 bits */ |
| u32 addrh; /* Register address, high 32 bits */ |
| }; |
| |
| /* A maximum number of 32 ACPI tables ought to be enough for now */ |
| #define MAX_ACPI_TABLES 32 |
| |
| /* RSDT (Root System Description Table) */ |
| struct acpi_rsdt { |
| struct acpi_table_header header; |
| u32 entry[MAX_ACPI_TABLES]; |
| }; |
| |
| /* XSDT (Extended System Description Table) */ |
| struct acpi_xsdt { |
| struct acpi_table_header header; |
| u64 entry[MAX_ACPI_TABLES]; |
| }; |
| |
| /* HPET timers */ |
| struct __packed acpi_hpet { |
| struct acpi_table_header header; |
| u32 id; |
| struct acpi_gen_regaddr addr; |
| u8 number; |
| u16 min_tick; |
| u8 attributes; |
| }; |
| |
| struct __packed acpi_tpm2 { |
| struct acpi_table_header header; |
| u16 platform_class; |
| u8 reserved[2]; |
| u64 control_area; |
| u32 start_method; |
| u8 msp[12]; |
| u32 laml; |
| u64 lasa; |
| }; |
| |
| struct __packed acpi_tcpa { |
| struct acpi_table_header header; |
| u16 platform_class; |
| u32 laml; |
| u64 lasa; |
| }; |
| |
| /* FADT Preferred Power Management Profile */ |
| enum acpi_pm_profile { |
| ACPI_PM_UNSPECIFIED = 0, |
| ACPI_PM_DESKTOP, |
| ACPI_PM_MOBILE, |
| ACPI_PM_WORKSTATION, |
| ACPI_PM_ENTERPRISE_SERVER, |
| ACPI_PM_SOHO_SERVER, |
| ACPI_PM_APPLIANCE_PC, |
| ACPI_PM_PERFORMANCE_SERVER, |
| ACPI_PM_TABLET |
| }; |
| |
| /* FADT flags for p_lvl2_lat and p_lvl3_lat */ |
| #define ACPI_FADT_C2_NOT_SUPPORTED 101 |
| #define ACPI_FADT_C3_NOT_SUPPORTED 1001 |
| |
| /* FADT Boot Architecture Flags */ |
| #define ACPI_FADT_LEGACY_FREE 0x00 |
| #define ACPI_FADT_LEGACY_DEVICES BIT(0) |
| #define ACPI_FADT_8042 BIT(1) |
| #define ACPI_FADT_VGA_NOT_PRESENT BIT(2) |
| #define ACPI_FADT_MSI_NOT_SUPPORTED BIT(3) |
| #define ACPI_FADT_NO_PCIE_ASPM_CONTROL BIT(4) |
| |
| /* FADT Feature Flags */ |
| #define ACPI_FADT_WBINVD BIT(0) |
| #define ACPI_FADT_WBINVD_FLUSH BIT(1) |
| #define ACPI_FADT_C1_SUPPORTED BIT(2) |
| #define ACPI_FADT_C2_MP_SUPPORTED BIT(3) |
| #define ACPI_FADT_POWER_BUTTON BIT(4) |
| #define ACPI_FADT_SLEEP_BUTTON BIT(5) |
| #define ACPI_FADT_FIXED_RTC BIT(6) |
| #define ACPI_FADT_S4_RTC_WAKE BIT(7) |
| #define ACPI_FADT_32BIT_TIMER BIT(8) |
| #define ACPI_FADT_DOCKING_SUPPORTED BIT(9) |
| #define ACPI_FADT_RESET_REGISTER BIT(10) |
| #define ACPI_FADT_SEALED_CASE BIT(11) |
| #define ACPI_FADT_HEADLESS BIT(12) |
| #define ACPI_FADT_SLEEP_TYPE BIT(13) |
| #define ACPI_FADT_PCI_EXPRESS_WAKE BIT(14) |
| #define ACPI_FADT_PLATFORM_CLOCK BIT(15) |
| #define ACPI_FADT_S4_RTC_VALID BIT(16) |
| #define ACPI_FADT_REMOTE_POWER_ON BIT(17) |
| #define ACPI_FADT_APIC_CLUSTER BIT(18) |
| #define ACPI_FADT_APIC_PHYSICAL BIT(19) |
| #define ACPI_FADT_HW_REDUCED_ACPI BIT(20) |
| #define ACPI_FADT_LOW_PWR_IDLE_S0 BIT(21) |
| |
| enum acpi_address_space_type { |
| ACPI_ADDRESS_SPACE_MEMORY = 0, /* System memory */ |
| ACPI_ADDRESS_SPACE_IO, /* System I/O */ |
| ACPI_ADDRESS_SPACE_PCI, /* PCI config space */ |
| ACPI_ADDRESS_SPACE_EC, /* Embedded controller */ |
| ACPI_ADDRESS_SPACE_SMBUS, /* SMBus */ |
| ACPI_ADDRESS_SPACE_PCC = 0x0a, /* Platform Comm. Channel */ |
| ACPI_ADDRESS_SPACE_FIXED = 0x7f /* Functional fixed hardware */ |
| }; |
| |
| enum acpi_address_space_size { |
| ACPI_ACCESS_SIZE_UNDEFINED = 0, |
| ACPI_ACCESS_SIZE_BYTE_ACCESS, |
| ACPI_ACCESS_SIZE_WORD_ACCESS, |
| ACPI_ACCESS_SIZE_DWORD_ACCESS, |
| ACPI_ACCESS_SIZE_QWORD_ACCESS |
| }; |
| |
| /* FADT (Fixed ACPI Description Table) */ |
| struct __packed acpi_fadt { |
| struct acpi_table_header header; |
| u32 firmware_ctrl; |
| u32 dsdt; |
| u8 res1; |
| u8 preferred_pm_profile; |
| u16 sci_int; |
| u32 smi_cmd; |
| u8 acpi_enable; |
| u8 acpi_disable; |
| u8 s4bios_req; |
| u8 pstate_cnt; |
| u32 pm1a_evt_blk; |
| u32 pm1b_evt_blk; |
| u32 pm1a_cnt_blk; |
| u32 pm1b_cnt_blk; |
| u32 pm2_cnt_blk; |
| u32 pm_tmr_blk; |
| u32 gpe0_blk; |
| u32 gpe1_blk; |
| u8 pm1_evt_len; |
| u8 pm1_cnt_len; |
| u8 pm2_cnt_len; |
| u8 pm_tmr_len; |
| u8 gpe0_blk_len; |
| u8 gpe1_blk_len; |
| u8 gpe1_base; |
| u8 cst_cnt; |
| u16 p_lvl2_lat; |
| u16 p_lvl3_lat; |
| u16 flush_size; |
| u16 flush_stride; |
| u8 duty_offset; |
| u8 duty_width; |
| u8 day_alrm; |
| u8 mon_alrm; |
| u8 century; |
| u16 iapc_boot_arch; |
| u8 res2; |
| u32 flags; |
| struct acpi_gen_regaddr reset_reg; |
| u8 reset_value; |
| u16 arm_boot_arch; |
| u8 minor_revision; |
| u32 x_firmware_ctl_l; |
| u32 x_firmware_ctl_h; |
| u32 x_dsdt_l; |
| u32 x_dsdt_h; |
| struct acpi_gen_regaddr x_pm1a_evt_blk; |
| struct acpi_gen_regaddr x_pm1b_evt_blk; |
| struct acpi_gen_regaddr x_pm1a_cnt_blk; |
| struct acpi_gen_regaddr x_pm1b_cnt_blk; |
| struct acpi_gen_regaddr x_pm2_cnt_blk; |
| struct acpi_gen_regaddr x_pm_tmr_blk; |
| struct acpi_gen_regaddr x_gpe0_blk; |
| struct acpi_gen_regaddr x_gpe1_blk; |
| }; |
| |
| /* FADT TABLE Revision values - note these do not match the ACPI revision */ |
| #define ACPI_FADT_REV_ACPI_1_0 1 |
| #define ACPI_FADT_REV_ACPI_2_0 3 |
| #define ACPI_FADT_REV_ACPI_3_0 4 |
| #define ACPI_FADT_REV_ACPI_4_0 4 |
| #define ACPI_FADT_REV_ACPI_5_0 5 |
| #define ACPI_FADT_REV_ACPI_6_0 6 |
| |
| /* MADT TABLE Revision values - note these do not match the ACPI revision */ |
| #define ACPI_MADT_REV_ACPI_3_0 2 |
| #define ACPI_MADT_REV_ACPI_4_0 3 |
| #define ACPI_MADT_REV_ACPI_5_0 3 |
| #define ACPI_MADT_REV_ACPI_6_0 5 |
| |
| #define ACPI_MCFG_REV_ACPI_3_0 1 |
| |
| /* IVRS Revision Field */ |
| #define IVRS_FORMAT_FIXED 0x01 /* Type 10h & 11h only */ |
| #define IVRS_FORMAT_MIXED 0x02 /* Type 10h, 11h, & 40h */ |
| |
| /* FACS flags */ |
| #define ACPI_FACS_S4BIOS_F BIT(0) |
| #define ACPI_FACS_64BIT_WAKE_F BIT(1) |
| |
| /* FACS (Firmware ACPI Control Structure) */ |
| struct acpi_facs { |
| char signature[ACPI_NAME_LEN]; /* "FACS" */ |
| u32 length; /* Length in bytes (>= 64) */ |
| u32 hardware_signature; /* Hardware signature */ |
| u32 firmware_waking_vector; /* Firmware waking vector */ |
| u32 global_lock; /* Global lock */ |
| u32 flags; /* FACS flags */ |
| u32 x_firmware_waking_vector_l; /* X FW waking vector, low */ |
| u32 x_firmware_waking_vector_h; /* X FW waking vector, high */ |
| u8 version; /* Version 2 */ |
| u8 res1[3]; |
| u32 ospm_flags; /* OSPM enabled flags */ |
| u8 res2[24]; |
| }; |
| |
| /* MADT flags */ |
| #define ACPI_MADT_PCAT_COMPAT BIT(0) |
| |
| /* MADT (Multiple APIC Description Table) */ |
| struct acpi_madt { |
| struct acpi_table_header header; |
| u32 lapic_addr; /* Local APIC address */ |
| u32 flags; /* Multiple APIC flags */ |
| }; |
| |
| /* MADT: APIC Structure Type*/ |
| enum acpi_apic_types { |
| ACPI_APIC_LAPIC = 0, /* Processor local APIC */ |
| ACPI_APIC_IOAPIC, /* I/O APIC */ |
| ACPI_APIC_IRQ_SRC_OVERRIDE, /* Interrupt source override */ |
| ACPI_APIC_NMI_SRC, /* NMI source */ |
| ACPI_APIC_LAPIC_NMI, /* Local APIC NMI */ |
| ACPI_APIC_LAPIC_ADDR_OVERRIDE, /* Local APIC address override */ |
| ACPI_APIC_IOSAPIC, /* I/O SAPIC */ |
| ACPI_APIC_LSAPIC, /* Local SAPIC */ |
| ACPI_APIC_PLATFORM_IRQ_SRC, /* Platform interrupt sources */ |
| ACPI_APIC_LX2APIC, /* Processor local x2APIC */ |
| ACPI_APIC_LX2APIC_NMI, /* Local x2APIC NMI */ |
| }; |
| |
| /* MADT: Processor Local APIC Structure */ |
| |
| #define LOCAL_APIC_FLAG_ENABLED BIT(0) |
| |
| struct acpi_madt_lapic { |
| u8 type; /* Type (0) */ |
| u8 length; /* Length in bytes (8) */ |
| u8 processor_id; /* ACPI processor ID */ |
| u8 apic_id; /* Local APIC ID */ |
| u32 flags; /* Local APIC flags */ |
| }; |
| |
| /* MADT: I/O APIC Structure */ |
| struct acpi_madt_ioapic { |
| u8 type; /* Type (1) */ |
| u8 length; /* Length in bytes (12) */ |
| u8 ioapic_id; /* I/O APIC ID */ |
| u8 reserved; |
| u32 ioapic_addr; /* I/O APIC address */ |
| u32 gsi_base; /* Global system interrupt base */ |
| }; |
| |
| /* MADT: Interrupt Source Override Structure */ |
| struct __packed acpi_madt_irqoverride { |
| u8 type; /* Type (2) */ |
| u8 length; /* Length in bytes (10) */ |
| u8 bus; /* ISA (0) */ |
| u8 source; /* Bus-relative int. source (IRQ) */ |
| u32 gsirq; /* Global system interrupt */ |
| u16 flags; /* MPS INTI flags */ |
| }; |
| |
| /* MADT: Local APIC NMI Structure */ |
| struct __packed acpi_madt_lapic_nmi { |
| u8 type; /* Type (4) */ |
| u8 length; /* Length in bytes (6) */ |
| u8 processor_id; /* ACPI processor ID */ |
| u16 flags; /* MPS INTI flags */ |
| u8 lint; /* Local APIC LINT# */ |
| }; |
| |
| /* MCFG (PCI Express MMIO config space BAR description table) */ |
| struct acpi_mcfg { |
| struct acpi_table_header header; |
| u8 reserved[8]; |
| }; |
| |
| struct acpi_mcfg_mmconfig { |
| u32 base_address_l; |
| u32 base_address_h; |
| u16 pci_segment_group_number; |
| u8 start_bus_number; |
| u8 end_bus_number; |
| u8 reserved[4]; |
| }; |
| |
| /* PM1_CNT bit defines */ |
| #define PM1_CNT_SCI_EN BIT(0) |
| |
| /* ACPI global NVS structure */ |
| struct acpi_global_nvs; |
| |
| /* CSRT (Core System Resource Table) */ |
| struct acpi_csrt { |
| struct acpi_table_header header; |
| }; |
| |
| struct acpi_csrt_group { |
| u32 length; |
| u32 vendor_id; |
| u32 subvendor_id; |
| u16 device_id; |
| u16 subdevice_id; |
| u16 revision; |
| u16 reserved; |
| u32 shared_info_length; |
| }; |
| |
| struct acpi_csrt_shared_info { |
| u16 major_version; |
| u16 minor_version; |
| u32 mmio_base_low; |
| u32 mmio_base_high; |
| u32 gsi_interrupt; |
| u8 interrupt_polarity; |
| u8 interrupt_mode; |
| u8 num_channels; |
| u8 dma_address_width; |
| u16 base_request_line; |
| u16 num_handshake_signals; |
| u32 max_block_size; |
| }; |
| |
| /* Port types for ACPI _UPC object */ |
| enum acpi_upc_type { |
| UPC_TYPE_A, |
| UPC_TYPE_MINI_AB, |
| UPC_TYPE_EXPRESSCARD, |
| UPC_TYPE_USB3_A, |
| UPC_TYPE_USB3_B, |
| UPC_TYPE_USB3_MICRO_B, |
| UPC_TYPE_USB3_MICRO_AB, |
| UPC_TYPE_USB3_POWER_B, |
| UPC_TYPE_C_USB2_ONLY, |
| UPC_TYPE_C_USB2_SS_SWITCH, |
| UPC_TYPE_C_USB2_SS, |
| UPC_TYPE_PROPRIETARY = 0xff, |
| /* |
| * The following types are not directly defined in the ACPI |
| * spec but are used by coreboot to identify a USB device type. |
| */ |
| UPC_TYPE_INTERNAL = 0xff, |
| UPC_TYPE_UNUSED, |
| UPC_TYPE_HUB |
| }; |
| |
| enum dev_scope_type { |
| SCOPE_PCI_ENDPOINT = 1, |
| SCOPE_PCI_SUB = 2, |
| SCOPE_IOAPIC = 3, |
| SCOPE_MSI_HPET = 4, |
| SCOPE_ACPI_NAMESPACE_DEVICE = 5 |
| }; |
| |
| struct __packed dev_scope { |
| u8 type; |
| u8 length; |
| u8 reserved[2]; |
| u8 enumeration; |
| u8 start_bus; |
| struct { |
| u8 dev; |
| u8 fn; |
| } __packed path[0]; |
| }; |
| |
| enum dmar_type { |
| DMAR_DRHD = 0, |
| DMAR_RMRR = 1, |
| DMAR_ATSR = 2, |
| DMAR_RHSA = 3, |
| DMAR_ANDD = 4 |
| }; |
| |
| enum { |
| DRHD_INCLUDE_PCI_ALL = BIT(0) |
| }; |
| |
| enum dmar_flags { |
| DMAR_INTR_REMAP = BIT(0), |
| DMAR_X2APIC_OPT_OUT = BIT(1), |
| DMAR_CTRL_PLATFORM_OPT_IN_FLAG = BIT(2), |
| }; |
| |
| struct dmar_entry { |
| u16 type; |
| u16 length; |
| u8 flags; |
| u8 reserved; |
| u16 segment; |
| u64 bar; |
| }; |
| |
| struct dmar_rmrr_entry { |
| u16 type; |
| u16 length; |
| u16 reserved; |
| u16 segment; |
| u64 bar; |
| u64 limit; |
| }; |
| |
| /* DMAR (DMA Remapping Reporting Structure) */ |
| struct __packed acpi_dmar { |
| struct acpi_table_header header; |
| u8 host_address_width; |
| u8 flags; |
| u8 reserved[10]; |
| struct dmar_entry structure[0]; |
| }; |
| |
| /* DBG2 definitions are partially used for SPCR interface_type */ |
| |
| /* Types for port_type field */ |
| |
| #define ACPI_DBG2_SERIAL_PORT 0x8000 |
| #define ACPI_DBG2_1394_PORT 0x8001 |
| #define ACPI_DBG2_USB_PORT 0x8002 |
| #define ACPI_DBG2_NET_PORT 0x8003 |
| |
| /* Subtypes for port_subtype field */ |
| |
| #define ACPI_DBG2_16550_COMPATIBLE 0x0000 |
| #define ACPI_DBG2_16550_SUBSET 0x0001 |
| #define ACPI_DBG2_ARM_PL011 0x0003 |
| #define ACPI_DBG2_ARM_SBSA_32BIT 0x000D |
| #define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E |
| #define ACPI_DBG2_ARM_DCC 0x000F |
| #define ACPI_DBG2_BCM2835 0x0010 |
| |
| #define ACPI_DBG2_1394_STANDARD 0x0000 |
| |
| #define ACPI_DBG2_USB_XHCI 0x0000 |
| #define ACPI_DBG2_USB_EHCI 0x0001 |
| |
| #define ACPI_DBG2_UNKNOWN 0x00FF |
| |
| /* DBG2: Microsoft Debug Port Table 2 header */ |
| struct __packed acpi_dbg2_header { |
| struct acpi_table_header header; |
| u32 devices_offset; |
| u32 devices_count; |
| }; |
| |
| /* DBG2: Microsoft Debug Port Table 2 device entry */ |
| struct __packed acpi_dbg2_device { |
| u8 revision; |
| u16 length; |
| u8 address_count; |
| u16 namespace_string_length; |
| u16 namespace_string_offset; |
| u16 oem_data_length; |
| u16 oem_data_offset; |
| u16 port_type; |
| u16 port_subtype; |
| u8 reserved[2]; |
| u16 base_address_offset; |
| u16 address_size_offset; |
| }; |
| |
| /* SPCR (Serial Port Console Redirection table) */ |
| struct __packed acpi_spcr { |
| struct acpi_table_header header; |
| u8 interface_type; |
| u8 reserved[3]; |
| struct acpi_gen_regaddr serial_port; |
| u8 interrupt_type; |
| u8 pc_interrupt; |
| u32 interrupt; /* Global system interrupt */ |
| u8 baud_rate; |
| u8 parity; |
| u8 stop_bits; |
| u8 flow_control; |
| u8 terminal_type; |
| u8 reserved1; |
| u16 pci_device_id; /* Must be 0xffff if not PCI device */ |
| u16 pci_vendor_id; /* Must be 0xffff if not PCI device */ |
| u8 pci_bus; |
| u8 pci_device; |
| u8 pci_function; |
| u32 pci_flags; |
| u8 pci_segment; |
| u32 reserved2; |
| }; |
| |
| /* Tables defined/reserved by ACPI and generated by U-Boot */ |
| enum acpi_tables { |
| ACPITAB_BERT, |
| ACPITAB_DBG2, |
| ACPITAB_DMAR, |
| ACPITAB_DSDT, |
| ACPITAB_ECDT, |
| ACPITAB_FACS, |
| ACPITAB_FADT, |
| ACPITAB_HEST, |
| ACPITAB_HPET, |
| ACPITAB_IVRS, |
| ACPITAB_MADT, |
| ACPITAB_MCFG, |
| ACPITAB_NHLT, |
| ACPITAB_RSDP, |
| ACPITAB_RSDT, |
| ACPITAB_SLIT, |
| ACPITAB_SPCR, |
| ACPITAB_SPMI, |
| ACPITAB_SRAT, |
| ACPITAB_SSDT, |
| ACPITAB_TCPA, |
| ACPITAB_TPM2, |
| ACPITAB_VFCT, |
| ACPITAB_XSDT, |
| |
| ACPITAB_COUNT, |
| }; |
| |
| /** |
| * acpi_get_table_revision() - Get the revision number generated for a table |
| * |
| * This keeps the version-number information in one place |
| * |
| * @table: ACPI table to check |
| * @return version number that U-Boot generates |
| */ |
| int acpi_get_table_revision(enum acpi_tables table); |
| |
| /** |
| * acpi_create_dmar() - Create a DMA Remapping Reporting (DMAR) table |
| * |
| * @dmar: Place to put the table |
| * @flags: DMAR flags to use |
| * @return 0 if OK, -ve on error |
| */ |
| int acpi_create_dmar(struct acpi_dmar *dmar, enum dmar_flags flags); |
| |
| /** |
| * acpi_create_dbg2() - Create a DBG2 table |
| * |
| * This table describes how to access the debug UART |
| * |
| * @dbg2: Place to put information |
| * @port_type: Serial port type (see ACPI_DBG2_...) |
| * @port_subtype: Serial port sub-type (see ACPI_DBG2_...) |
| * @address: ACPI address of port |
| * @address_size: Size of address space |
| * @device_path: Path of device (created using acpi_device_path()) |
| */ |
| void acpi_create_dbg2(struct acpi_dbg2_header *dbg2, |
| int port_type, int port_subtype, |
| struct acpi_gen_regaddr *address, uint32_t address_size, |
| const char *device_path); |
| |
| /** |
| * acpi_fill_header() - Set up a new table header |
| * |
| * This sets all fields except length, revision, checksum and aslc_revision |
| * |
| * @header: ACPI header to update |
| * @signature: Table signature to use (4 characters) |
| */ |
| void acpi_fill_header(struct acpi_table_header *header, char *signature); |
| |
| /** |
| * acpi_align() - Align the ACPI output pointer to a 16-byte boundary |
| * |
| * @ctx: ACPI context |
| */ |
| void acpi_align(struct acpi_ctx *ctx); |
| |
| /** |
| * acpi_align64() - Align the ACPI output pointer to a 64-byte boundary |
| * |
| * @ctx: ACPI context |
| */ |
| void acpi_align64(struct acpi_ctx *ctx); |
| |
| /** |
| * acpi_inc() - Increment the ACPI output pointer by a bit |
| * |
| * The pointer is NOT aligned afterwards. |
| * |
| * @ctx: ACPI context |
| * @amount: Amount to increment by |
| */ |
| void acpi_inc(struct acpi_ctx *ctx, uint amount); |
| |
| /** |
| * acpi_inc_align() - Increment the ACPI output pointer by a bit and align |
| * |
| * The pointer is aligned afterwards to a 16-byte boundary |
| * |
| * @ctx: ACPI context |
| * @amount: Amount to increment by |
| */ |
| void acpi_inc_align(struct acpi_ctx *ctx, uint amount); |
| |
| /** |
| * acpi_add_table() - Add a new table to the RSDP and XSDT |
| * |
| * @ctx: ACPI context |
| * @table: Table to add |
| * @return 0 if OK, -E2BIG if too many tables |
| */ |
| int acpi_add_table(struct acpi_ctx *ctx, void *table); |
| |
| /** |
| * acpi_setup_base_tables() - Set up context along with RSDP, RSDT and XSDT |
| * |
| * Set up the context with the given start position. Some basic tables are |
| * always needed, so set them up as well. |
| * |
| * @ctx: Context to set up |
| */ |
| void acpi_setup_base_tables(struct acpi_ctx *ctx, void *start); |
| |
| /** |
| * acpi_write_rsdp() - Write out an RSDP indicating where the ACPI tables are |
| * |
| * @rsdp: Address to write RSDP |
| * @rsdt: Address of RSDT |
| * @xsdt: Address of XSDT |
| */ |
| void acpi_write_rsdp(struct acpi_rsdp *rsdp, struct acpi_rsdt *rsdt, |
| struct acpi_xsdt *xsdt); |
| |
| #endif /* !__ACPI__*/ |
| |
| #include <asm/acpi_table.h> |
| |
| #endif /* __ACPI_TABLE_H__ */ |