| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com> |
| * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org> |
| * Copyright 2019 NXP |
| * |
| * Gated clock implementation |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <malloc.h> |
| #include <clk-uclass.h> |
| #include <dm/device.h> |
| #include <dm/devres.h> |
| #include <linux/clk-provider.h> |
| #include <clk.h> |
| #include "clk.h" |
| #include <linux/err.h> |
| |
| #define UBOOT_DM_CLK_GATE "clk_gate" |
| |
| /** |
| * DOC: basic gatable clock which can gate and ungate it's output |
| * |
| * Traits of this clock: |
| * prepare - clk_(un)prepare only ensures parent is (un)prepared |
| * enable - clk_enable and clk_disable are functional & control gating |
| * rate - inherits rate from parent. No clk_set_rate support |
| * parent - fixed parent. No clk_set_parent support |
| */ |
| |
| /* |
| * It works on following logic: |
| * |
| * For enabling clock, enable = 1 |
| * set2dis = 1 -> clear bit -> set = 0 |
| * set2dis = 0 -> set bit -> set = 1 |
| * |
| * For disabling clock, enable = 0 |
| * set2dis = 1 -> set bit -> set = 1 |
| * set2dis = 0 -> clear bit -> set = 0 |
| * |
| * So, result is always: enable xor set2dis. |
| */ |
| static void clk_gate_endisable(struct clk *clk, int enable) |
| { |
| struct clk_gate *gate = to_clk_gate(clk_dev_binded(clk) ? |
| dev_get_clk_ptr(clk->dev) : clk); |
| int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0; |
| u32 reg; |
| |
| set ^= enable; |
| |
| if (gate->flags & CLK_GATE_HIWORD_MASK) { |
| reg = BIT(gate->bit_idx + 16); |
| if (set) |
| reg |= BIT(gate->bit_idx); |
| } else { |
| #if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF) |
| reg = gate->io_gate_val; |
| #else |
| reg = readl(gate->reg); |
| #endif |
| |
| if (set) |
| reg |= BIT(gate->bit_idx); |
| else |
| reg &= ~BIT(gate->bit_idx); |
| } |
| |
| writel(reg, gate->reg); |
| } |
| |
| static int clk_gate_enable(struct clk *clk) |
| { |
| clk_gate_endisable(clk, 1); |
| |
| return 0; |
| } |
| |
| static int clk_gate_disable(struct clk *clk) |
| { |
| clk_gate_endisable(clk, 0); |
| |
| return 0; |
| } |
| |
| int clk_gate_is_enabled(struct clk *clk) |
| { |
| struct clk_gate *gate = to_clk_gate(clk_dev_binded(clk) ? |
| dev_get_clk_ptr(clk->dev) : clk); |
| u32 reg; |
| |
| #if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF) |
| reg = gate->io_gate_val; |
| #else |
| reg = readl(gate->reg); |
| #endif |
| |
| /* if a set bit disables this clk, flip it before masking */ |
| if (gate->flags & CLK_GATE_SET_TO_DISABLE) |
| reg ^= BIT(gate->bit_idx); |
| |
| reg &= BIT(gate->bit_idx); |
| |
| return reg ? 1 : 0; |
| } |
| |
| const struct clk_ops clk_gate_ops = { |
| .enable = clk_gate_enable, |
| .disable = clk_gate_disable, |
| .get_rate = clk_generic_get_rate, |
| }; |
| |
| struct clk *clk_register_gate(struct device *dev, const char *name, |
| const char *parent_name, unsigned long flags, |
| void __iomem *reg, u8 bit_idx, |
| u8 clk_gate_flags, spinlock_t *lock) |
| { |
| struct clk_gate *gate; |
| struct clk *clk; |
| int ret; |
| |
| if (clk_gate_flags & CLK_GATE_HIWORD_MASK) { |
| if (bit_idx > 15) { |
| pr_err("gate bit exceeds LOWORD field\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| } |
| |
| /* allocate the gate */ |
| gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| if (!gate) |
| return ERR_PTR(-ENOMEM); |
| |
| /* struct clk_gate assignments */ |
| gate->reg = reg; |
| gate->bit_idx = bit_idx; |
| gate->flags = clk_gate_flags; |
| #if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF) |
| gate->io_gate_val = *(u32 *)reg; |
| #endif |
| |
| clk = &gate->clk; |
| |
| ret = clk_register(clk, UBOOT_DM_CLK_GATE, name, parent_name); |
| if (ret) { |
| kfree(gate); |
| return ERR_PTR(ret); |
| } |
| |
| return clk; |
| } |
| |
| U_BOOT_DRIVER(clk_gate) = { |
| .name = UBOOT_DM_CLK_GATE, |
| .id = UCLASS_CLK, |
| .ops = &clk_gate_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |