blob: a54cfaccbf6cb15882569463fabd81d1f87e4d70 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama7g5ek-u-boot.dtsi - Device Tree file for SAMA7G5 SoC u-boot
* properties.
*
* Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
*
* Author: Eugen Hristev <eugen.hristev@microchip.com>
* Author: Claudiu Beznea <claudiu.beznea@microchip.com>
*
*/
#include "sama7g5-pinfunc.h"
#include <dt-bindings/reset/sama7g5-reset.h>
#include <dt-bindings/clock/at91.h>
/ {
chosen {
u-boot,dm-pre-reloc;
};
utmi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usb_phy0: phy@0 {
compatible = "microchip,sama7g5-usb-phy";
sfr-phandle = <&sfr>;
reg = <0>;
clocks = <&utmi_clk USB_UTMI1>;
clock-names = "utmi_clk";
status = "disabled";
#phy-cells = <0>;
};
usb_phy1: phy@1 {
compatible = "microchip,sama7g5-usb-phy";
sfr-phandle = <&sfr>;
reg = <1>;
clocks = <&utmi_clk USB_UTMI2>;
clock-names = "utmi_clk";
status = "disabled";
#phy-cells = <0>;
};
usb_phy2: phy@2 {
compatible = "microchip,sama7g5-usb-phy";
sfr-phandle = <&sfr>;
reg = <2>;
clocks = <&utmi_clk USB_UTMI3>;
clock-names = "utmi_clk";
status = "disabled";
#phy-cells = <0>;
};
};
utmi_clk: utmi-clk {
compatible = "microchip,sama7g5-utmi-clk";
sfr-phandle = <&sfr>;
#clock-cells = <1>;
clocks = <&pmc PMC_TYPE_CORE 27>;
clock-names = "utmi_clk";
resets = <&reset_controller SAMA7G5_RESET_USB_PHY1>,
<&reset_controller SAMA7G5_RESET_USB_PHY2>,
<&reset_controller SAMA7G5_RESET_USB_PHY3>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
};
soc {
u-boot,dm-pre-reloc;
usb2: usb@400000 {
compatible = "microchip,sama7g5-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 106>, <&utmi_clk USB_UTMI1>, <&usb_clk>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
usb3: usb@500000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00500000 0x100000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_clk>, <&pmc PMC_TYPE_PERIPHERAL 106>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
sfr: sfr@e1624000 {
compatible = "microchip,sama7g5-sfr", "syscon";
reg = <0xe1624000 0x4000>;
};
};
};
&main_rc {
u-boot,dm-pre-reloc;
};
&main_xtal {
u-boot,dm-pre-reloc;
};
&pioA {
u-boot,dm-pre-reloc;
};
&pinctrl_flx3_default {
u-boot,dm-pre-reloc;
};
&pioA {
u-boot,dm-pre-reloc;
pinctrl_usb_default: usb_default {
pinmux = <PIN_PC6__GPIO>;
bias-disable;
};
};
&pit64b0 {
u-boot,dm-pre-reloc;
};
&pmc {
u-boot,dm-pre-reloc;
};
&slow_rc_osc {
u-boot,dm-pre-reloc;
};
&slow_xtal {
u-boot,dm-pre-reloc;
};
&uart3 {
u-boot,dm-pre-reloc;
};
&usb2 {
num-ports = <3>;
atmel,vbus-gpio = <0
0
&pioA PIN_PC6 GPIO_ACTIVE_HIGH
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
phys = <&usb_phy2>;
phy-names = "usb";
status = "okay";
};
&usb3 {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb_phy1 {
status = "okay";
};
&usb_phy2 {
status = "okay";
};